Travis Middleton

• Plan, design and fabricate flat deck for 1 ton truck. Includes headache rack, underbody cabinets, and hidden fifth wheel hitch
• Wire lighting and electrical for truck deck build
• Plan, design and fabricate aluminum storage boxes for picker truck
• Plan, design and fabricate aluminum storage shelf unit
• Plan, design and fabricate welding skid and cabinets
• Design and fabricate house hold shoe racks/storage
• Plan, design and fabricate aluminum motorcycle hitch carrier
• Plan, design and fabricate aluminum welding skid
• Plan, design and fabricate aluminum tidy tanks

• Installing surface casing for HDD
• Instal road culverts using Guided Auger Bore, Auger Bore Machine and pneumatic pipe ramming
• Pipe sizes vary between 6" and 64" x 1.00" wall
• Coordinate with trucking services to mobilize and the demobilization
• Coordinate with sub trades and services to support our operations
• Manage crew and equipment
• Operate front end loaders, skid steers, dozer, excavator

• Pipe fabrication of various sizes 1/5" socket welds to 16"
• 6" and 4" mainline
• 6" and 4" riser fabrication

• Pipe fabrication 3/4" Socket Weld's to 20"
• Pipeline riser fabrication
• 6" 4mm wall tie-in's
• Procedure: 6010 - uphand/downhand, 7018 Uphand, 7010 downhill, 8010 P1 Downhill
• 4" 3.5mm wall tie-in's
• 12" 12.7mm wall bore/drag pipeline
• 12" 7.5mm wall mainline pipeline
• Corking equipment
• 24" bore casing

Fortis Pattulo Gas Line Replacement

• 20" 9.54mm wall pipeline
• Ensure fitup as per procedure prior to accepting the fitup. Adjust fitup as needed
• Procedure: 6010 downhand, 8010 P1 downhand, 8018 uphand - Z662
• Procedure: 6010 downhand, 8010 P1 downhand, LHD-90 (9045) downhand - Z662 Annex K criteria

Fortis Pattulo Gas Line Replacement

• 30" pipe 1" thick bore casing
• 20" 9.54 mm wall carrier pipe
• 48" pipe 1" wall bore casing
• Cut, fit up, space in clamps while in bore hole
• Procedure: 6010 Downhill, 8010 P1/G1 Downhill, 8018 Uphill
• Measure and pipefit casing vent pipe
• Fabricate and install casing vent pipe
• Plan and estimate rod and consumable usage
• Coordinate with client QC

• Pipe fabrication of various sizes
• Riser fabrication
• Procedure: 6010 - uphand/downhand, 7018 uphand
• Structural fabrication. Pipe supports, landings and platforms, stairs, Style stair sets, handrail

• Industrial work setting working on steel structure of the Edmonton LRT stadium station
• Welding at heights in an aerial work platform
• Weld steel structures to embed plates in concrete forms
• Read engineer drawings to determine weld placement, weld size and beam placement
• Maintain safe working practices to achieve company's goals and project end state without incident
• Use travel restraint and fall arrest device's and protection to complete the job safely in accordance to OH&S standards

• Project based employment
• Welding pressure piping for Pembina projects
• Fit up and weld 3/4" Socket Welds to 20" Sch 80

• Fabricated structural mods and pipe supports from engineered drawings for ConocoPhillips and Enbridge.
• Was a part of the install team for ConocoPhillips mods and other structural supports on site.
• Plan and execute structural additions for electricians on site
• Read IFC's and structural drawings to build structural accordingly
• Operate yard equipment
• Repair steel bin and trailer
• Welding at heights from Aerial Work Platforms
• Modify weir plates inside of horizontal separator in accordance with ABSA/ASME code
• Sustained safety protocols and promoted proper, cost-effective and accurate handling of equipment and materials.

• Promoted workplace safety by checking team member compliance with all Primoris Services Canada and CNRL Horizon safety guidelines.
• Reviewed with employees the company procedures and policies, including worksite safety.
• Collaborated with team management to monitor team performance and implement disciplinary action when necessary.
• Allocated personnel and other resources to assist team in meeting objectives and helping workers to meet team goals.
• Liaised between teams and management to ensure goals and deadlines for maintenance project were achieved.

• Fabricate pipe spools. Small and big inch
• Plan and execute structural additions for Husky plant
• Field modifications of pipe spools and structural
• Cut and cap piles
• Fabrication of structural supports and structural stringers
• Assist in marking elevations and setting caps according to engineered layout
• Fabrication of a media hopper for Keyera Plant
• Fabricate and Install motor base extensions for variable drive motors for upgrades to existing TransMountain Pipeline facility
• Cut, Layout and Cap piles for various sites at existing TransMountain Pipeline facilities

• Fabricate flare line pipe supports in the shop
• Assist in marking elevations on piles
• Cut and cap piles
• Layout pile caps accordingly to site plans
• Weld compressor building
• Build custom frame support for meter skid
• Field modification of pipe spools
• Structural additions on existing supports

• Fabricate pipe spools. Big and small inch
• Fabrication of heat medium and re-boiler skids
• Set buildings and fabricated skids
• Build platforms, handrail and stairs
• Pre-fabbed stair modification including handrail modification
• Fabricate custom supports
• Fabrication of flare base

• Assess the work that need to be done
• Bid/Quote work
• Structural repairs to steel framed rig mats, replace grating
• Shale bin repairs
• Other small miscellaneous welding work

• Remove by gouging, grinding and cutting worn teeth on buckets. Install new teeth using 3/32 Dual Shield Wire and self shield wire
• Hard face buckets and blades
• Remove worn and damaged wear strips. Replace wear strips along sides and bottom of buckets
• Remove worn wear plates and bars from rock shaker. Install new wear plates and wear bars.
• Fix damaged hydraulic piston mounts

• Modify pipe supports inside compressor building
• Measure and modify grating sections to fit altered supports and skid
• Install compressor belly pan on an existing compressor

• Structural Plant modifications and new build
• Pipe fabrication for small and big inch piping jobs
• Fabrication of wellsite platforms, stairs, handrail
• Fabrication of wellsite building skids
• Fabrication of on site structural supports and modifications
• Install of buildings and structural modular pipe racks
• Pipeline tie ins for TransCanada
• Capper for small inch pipeline
• Procedure: 6010 - downhand/uphand, 7018 uphand, 8018 uphand, 7010 downhand, 8010 P1 downhand, 8010 G downhand

• Served with the Princess Patricia Canadian Light Infantry, 3rd Battalion stationed out of CFB Edmonton, Alberta.
• While in the Canadian Armed Forces (CAF) served one tour to Afghanistan, completed Airborne School, completed leadership courses, as well as instructor courses, and various other occupational courses.

• Preformed Aerial Acrobatics under parachute
• Interacted with general public regarding the performance. To include demonstrations of gear packing, to kids and adults.
• Public relations interactions with media outlets to include news stations, radio stations and online media outlets
• Maintain a high level of professionalism at all times during event gatherings and performances