SURESH KUMAR F.I.V,M.I.E, C.Engr

• Snow clearance operation on Zozila Pass with highly specialized equipement
• Prepare feasibility report of road, RCC Bridge, Checking drawings and their feasibility on ground, checking design specifications of bridges and financial planning
• Conducting environmental impact study for identifying and evaluating its effect on Bio- physical and social effects
• Management of resources at work site and worked with them as a team leader to achieve the laid down targets in time
• Enusure all safety compliance against avalanches and zero accident at site during snow clearance operation
• Estimating quantity and cost of materials, equipment and labour to determine project feasibility, evaluation the properties and structural requirements of the materilals being used in the Project
• Managed man power, materials, machines and other resources to complete the work within agreed time schedule.
• Performed administrative and office duties by handling phone and email correspondence, ordering materials and bookkeeping.
• Collaborated with engineering staff on prototype testing and instrument modification.
• Incorporated directives, manuals and diagrams into work for assigned projects.
• Aided engineering team with project efficiency by replacing basic human assignments with task automation.
• Used complex problem-solving techniques requiring regular use of ingenuity and creativity.
• Performed engineering change processes to support and improve existing products.
• Reduced system waste within existing processes through workflow diagrams, time studies and ergonomic work improvements.
• Supervised execution of contracts and prepared invoices for projects.
• Inspected plans and existing sites for compliance with civil codes relating to grading and drainage of paved surfaces.

• Prepared detailed project report, environmental impact assesment report and preparing detailed Cost Benefit Ratio report
• Prepare feasibility report of road, Equipment Bridges , Checking drawings and their feasibility on ground, checking design specifications of bridges and financial planning
• Managed resources at work site and worked with them as a team leader to achieve the laid down targets in time
• Met all safety compliance standards and ensured the zero accident at site during execution
• Educating men under command regarding safety guidelines and protocol to minimize the accidents
• Major Project Handled by the Client
• Project-I
• The Project with Location : Construction of 58.00 Km long road in side
• Bhutan from Samrang to Jomotsangkha
• Start & End date : Apr 2020
• Attended meetings and site locations to gather data for project work.
• Worked alongside project engineers to document site inspection findings for integration into construction plans and designs.
• Oversaw roadway milling, paving, drainage, utilities, traffic control and depth replacement.
• Oversaw modernization projects, handling line and grade surveys whenever needed.
• Investigated potential construction sites for available water resources and potential environmental hazards.
• Projected budgets for engineering projects to provide cost estimates and feasibility data.
• Delivered consistent support for document controls while reviewing, assessing and providing comments on contract documentation.

• Reviewed all plans, documents and calculations as well as in-progress and final bridge construction for quality and accuracy.
• Submitting feasibility report of Bridges , Checking drawings and their feasibility on ground, checking design specifications of PSC Box Girder & Pre-cast Segmental box girder.
• Designed cost-effective, sustainable and safe plans for large and small bridge projects.
• Assisted with preparing project budgets, maintaining schedules and putting together final documentation.
• To exercise the budgetary control of various road and bridge project in hand and preparing their progress report on monthly basis
• Attended meetings and site locations to gather data for project work.
• Supervised execution of contracts and prepared invoices for projects.
• Projected budgets for engineering projects to provide cost estimates and feasibility data.
• Investigated potential construction sites for available water resources and potential environmental hazards.
• Surveyed sites, collected measurements and assessed project conditions.
• Assessed damage thorough site assessments and structural evaluations to determine corrective action.
• Estimated quantities and cost of materials, equipment or labor to determine project feasibility.

• Supervised execution of contracts and prepared invoices for projects.
• Tracked project status through steps and complied with safety regulations and design requirements.
• Implemented safety and accident prevention programs prior to start of each project, conducting tailgate meetings daily.
• Worked collaboratively with contractors and engineers to ensure compliance with plans and specifications.
• Performed laboratory testing on collected samples from variety of materials.
• Prepared samples for testing based on type of materials and procedures specified.
• Inspected highway construction operations for compliance with contract specifications and safety.
• Assessed data gathered in field and developed drawings for highway and bridge projects.
• Created drawings and plans using CAD software.
• Demonstrated leadership by making improvements to work processes and helping to train others.

• Prepration and designing Tender Documents for the contracts for roads & bridge works
• Designing specifications of materials & stores to be procured and used for a particular engineering project
• Evalauation of Tenders, bidders and deciding reasonable / workable rates at pre contract stage.
• Investigated and resolved compliance problems with independent approach focused on implementing and maintaining sound practices.
• Managed paper or electronic filing systems by recording information, updating paperwork and maintaining documents.
• Read through contracts, regulations and procedural guidelines to verify comprehension and compliance.
• Developed contract templates and updated policies and procedures to maintain contracting consistency.
• Negotiated and reviewed contracts, rates and terms with current facilities and suppliers.
• Planned and controlled budgets for contracts and payments.
• Established clear review process throughout contract period to assess performance against expectations and requirements.

• Sketched outline designs and used CAD programs to create detailed designs and specifications.
• Survey with Total Station and highway / Road design with Bentley Mx Road Design software.
• Evaluated project feasibility based on available equipment and materials and labor expenses.
• Created technical reports to summarize analysis findings and highlight ways to improve project or particular components.
• Understood and complied with safety regulations.
• Maintained timely and accurate oral and written technical reports of engineering activities.
• Obtained knowledge of civil engineering techniques through training opportunities and industry documents publications
• Drafted detailed project design layouts to ensure conformance to specifications.
• Read and interpreted blueprints and structural specifications to determine material requirements.

• Assessed data gathered in field and developed drawings for highway and bridge projects.
• Contacted suppliers for quotes on project materials to determine best possible pricing.
• Created drawings and plans using CAD software.
• Built cost estimates using construction specifications and other project-specific information.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Utilized extensive knowledge of structural design involving wood, steel and concrete foundations.
• Met deadlines consistently with accuracy and strong attention to detail in spite of setbacks.
• Wrote detailed reports related to day to day /Fortnightly/Monthly engineering activities of projects.

• Supported engineers and surveyors with field layout activities and measurements.
• Obtained knowledge of civil engineering techniques through training opportunities and industry documents publications
• Completed projects with senior engineers and offered personal insight.
• Read and interpreted blueprints and structural specifications to determine material requirements.
• Assisted with construction staking and site measuring.
• Performed construction reporting, file management and documentation.
• Surveyed sites, collected measurements and assessed project conditions.
• Inspected project sites to monitor progress and conform to design specifications and safety or sanitation standards.
• Conducted onsite inspections and prepared takeoffs for engineering project costing.

• Obtained knowledge of civil engineering techniques through training opportunities and industry documents publications
• Performed construction reporting, file management and documentation.
• Assisted with construction staking and site measuring.
• Estimated quantities and cost of materials, equipment or labor to determine project feasibility.
• Managed and directed construction, operations or maintenance activities at project site.
• Surveyed sites, collected measurements and assessed project conditions.
• Surveyed project sites to establish reference points to guide construction.
• Analyzed survey reports, maps or other topographical or geologic data.
• Directed or participated in surveying to lay out installations or establish reference points, grades or elevations to guide construction.
• Computed loads and material stresses to determine optimal design specifications for foundations and bridge spans.
• Prepared or presented public reports on bid proposals, deeds and environmental impact statements.

Elected Fellow Approved Valuer as a Life Member of Institution of

Bechlor of Engineering