Summary
Overview
Work History
Education
Skills
Certification
Languages
Timeline
Generic
Spurgeon Locsin

Spurgeon Locsin

Edmonton,AB

Summary

Versatile and results-driven professional with extensive experience across various industries, including a pivotal role at CN Railway. Expert in forklift operation and mechanical assembly, complemented by strong leadership and team-building abilities. Proven track record of enhancing operational efficiency and safety, achieving significant improvements in workplace practices.

Overview

25
25
years of professional experience
1
1
Certification

Work History

Train Conductor

CN Railway
12.2023 - 04.2024
  • Work in train or yard service depending on seniority
  • Strictly follow and execute work according to operating rules and safety procedures
  • Carry out specific instructions detailing a train's route and specific movements
  • Coordinate the switching of cars, including coupling and uncoupling cars and lifting out coupling device
  • Observe, interpret, and relay signals and other indications affecting movement of train
  • Signal crew members for movement of the engine or train using specific signals, or radio to indicate when to start, stop, back-up, set or release air brakes
  • Have a thorough understanding of and follow General Code of Operating Rules (GCOR), General Orders and Bulletins as they pertain to the safe movement of trains, goods, and hazardous materials, ensuring the safety of CN employees and the general public
  • Provide flag protection and relay signals to trains in an emergency situation as stipulated in the operating rules
  • Move on and off moving or stationary equipment while train is performing industrial, station or yard switching
  • Ride moving car by hanging onto grab irons or ladder, sometimes for extended periods of time
  • Fill out required forms including: train orders and switch lists and prepares required clear and legible reports
  • Maintain first aid qualifications and apply first aid in emergency situations
  • Monitor yard operations area and be alert to changing conditions, take safe and responsible action to prevent personal injury and equipment damage

Chemical Production Operator

Univar Solutions
12.2022 - 10.2023
  • Loading and unloading of Chemical Tank Tracks
  • Loading and unloading of Chemical from Rail Tank Cars
  • Blending Chemical base on the recipe that clients requires us to do.
  • Material handling of hazardous products
  • Pick orders and prepare them for shipping using a forklift to place products on skids and wrap skids, and then load the skids onto trucks
  • Prepares product orders for customers to include custom blending and packaging
  • Cleans and maintains the warehouse and equipment
  • Transload chemicals into packaged containers (Drums, Carboys, Pails, IBC’s etc)

Forklift Operator

Manitoulin Transport
02.2022 - 04.2023
  • Safely loaded and unloaded trucks using appropriate forklift attachments, reducing the risk of accidents or injuries.
  • Kept warehouse clean and organized by removing debris and returning unused pallets to designated areas.
  • Improved warehouse efficiency by skillfully operating forklifts to move, locate, and stack materials.
  • Wrapped pallets in plastic wrap and attached merchandise tags to prepare for shipping.
  • Operated forklift in compliance with OSHA guidelines and organizational policies.
  • Operated equipment safely and efficiently to prevent damage to items and avoid injuries.
  • Maneuvered forklift safely using appropriate load rates and maintaining clear visibility of work areas.

Channel Letter Fabricator

Bannerz Canada Signs & Graphics
03.2022 - 03.2023
  • Read blueprints and technical drawings to determine specifications of materials and tools needed for specific jobs.
  • Fabricated components and structures following customer requirements.
  • Cut bent, and formed sheet metal and other materials to create metal works.
  • Used gauges, templates, and other measuring devices to inspect production parts.
  • Followed Operational Safety and Health Administration (OSHA) regulations to promote safe equipment operation and workplace safety.
  • Maintained clean and organized working environment to promote safety and efficiency.
  • Assisted in the design of custom products by providing input on material selection, dimensions, and functionality.
  • Adjusted machine settings and tooling to get accurate cuts and shapes for each job.
  • Performed quality checks to verify proper lengths, widths, and painted finish discrepancies.
  • Reduced material waste by accurately measuring and cutting materials to precise specifications.

Channel Letter Fabricator

YEG Signs And Graphics
03.2021 - 03.2022
  • Read blueprints and technical drawings to determine specifications of materials and tools needed for specific jobs.
  • Fabricated components and structures following customer requirements.
  • I work alone and single handedly fabricate Channel letters from scratch to finish.
  • I also do Banners, Posters, LED signage
  • Vinyl Installation on vehicles
  • I also do signage installations.

Forklift Operator

Rosenau Transport
09.2021 - 02.2022
  • Safely loaded and unloaded trucks using appropriate forklift attachments, reducing the risk of accidents or injuries.
  • Kept warehouse clean and organized by removing debris and returning unused pallets to designated areas.
  • Improved warehouse efficiency by skillfully operating forklifts to move, locate, and stack materials.
  • Wrapped pallets in plastic wrap and attached merchandise tags to prepare for shipping.
  • Transported goods between warehouse locations according to shipment and storage needs.
  • Operated forklift in compliance with OSHA guidelines and organizational policies.
  • Operated equipment safely and efficiently to prevent damage to items and avoid injuries.
  • Maneuvered forklift safely using appropriate load rates and maintaining clear visibility of work areas.
  • Coordinated with supervisors to prioritize tasks, ensuring the most urgent shipments were processed first.
  • Minimized product damage through careful maneuvering and transporting of fragile items.
  • Reduced loading times for shipping trucks by efficiently organizing and staging pallets.
  • Assisted in training new employees on safe forklift operation, contributing to a stronger workforce.
  • Communicated with floor managers to determine merchandise placement.
  • Enhanced workplace safety by diligently inspecting forklifts before each shift and reporting any issues promptly.

General Assembler

Canadian Tire (Sub Contract)
01.2019 - 02.2021
  • Assembling Grill Machines, 75 to 100 pieces of different kinds of bicycles per day, in short, anything that requires assembling so Canadian Tires can put it on displays, we assemble it.
  • Expedited order fulfillment by prioritizing tasks based on urgency, consistently meeting customer expectations for timely delivery.
  • Provided exceptional craftsmanship when working with delicate components, ensuring the production of high-quality finished products.
  • Maintained a clean and organized workspace, contributing to efficient workflow and minimizing potential hazards.
  • Increased product reliability by meticulously following assembly instructions and blueprints, ensuring accurate component placement.
  • Consistently met production quotas by efficiently managing workload and staying focused during high-pressure situations.
  • Conducted regular maintenance on tools and equipment, prolonging their lifespan and reducing downtime due to malfunctions.
  • Contributed to a safer work environment through consistent adherence to safety protocols and proper use of personal protective equipment.

Certified Kitchen Exhaust Technician/Gen. Mngr.

Zero De Grease Int.
02.2018 - 09.2019
  • Ensure that Technicians have met the standards of NFPA and the Depart of Health and Safety.
  • Completed job reports and logs immediately following service calls.
  • Increased customer satisfaction with prompt and knowledgeable support for various technical issues.
  • Maintained a safe work environment by strictly adhering to established safety protocols and guidelines.
  • Trained new technicians on standard operating procedures, ensuring consistency across the team.
  • Performed troubleshooting and diagnosis on malfunctioning equipment.
  • Maintained compliance with regulatory standards and safety requirements.
  • Maintained quality assurance and customer satisfaction objectives.
  • Completed complex repairs quickly by leveraging strong diagnostic skills and attention to detail.

Certified Kitchen Exhaust Technician

Charge-On International
09.2011 - 11.2018
  • Ensure that Technicians have met the standards of NFPA and the Depart of Health and Safety.
  • Completed job reports and logs immediately following service calls.
  • Increased customer satisfaction with prompt and knowledgeable support for various technical issues.
  • Maintained a safe work environment by strictly adhering to established safety protocols and guidelines.
  • Trained new technicians on standard operating procedures, ensuring consistency across the team.
  • Performed troubleshooting and diagnosis on malfunctioning equipment.
  • Maintained compliance with regulatory standards and safety requirements.
  • Maintained quality assurance and customer satisfaction objectives.
  • Completed complex repairs quickly by leveraging strong diagnostic skills and attention to detail.

Forklift Operator

Manitoulin Transport
02.2009 - 08.2011
  • Safely loaded and unloaded trucks using appropriate forklift attachments, reducing the risk of accidents or injuries.
  • Kept warehouse clean and organized by removing debris and returning unused pallets to designated areas.
  • Improved warehouse efficiency by skillfully operating forklifts to move, locate, and stack materials.
  • Wrapped pallets in plastic wrap and attached merchandise tags to prepare for shipping.
  • Operated forklift in compliance with OSHA guidelines and organizational policies.
  • Operated equipment safely and efficiently to prevent damage to items and avoid injuries.
  • Maneuvered forklift safely using appropriate load rates and maintaining clear visibility of work areas.

Forklift Operator

IKEA (Norway)
01.2005 - 12.2008
  • Safely loaded and unloaded trucks using appropriate forklift attachments, reducing the risk of accidents or injuries.
  • Kept warehouse clean and organized by removing debris and returning unused pallets to designated areas.
  • Improved warehouse efficiency by skillfully operating forklifts to move, locate, and stack materials.
  • Wrapped pallets in plastic wrap and attached merchandise tags to prepare for shipping.
  • Operated forklift in compliance with safety guidelines and organizational policies.
  • Operated equipment safely and efficiently to prevent damage to items and avoid injuries.
  • Maneuvered forklift safely using appropriate load rates and maintaining clear visibility of work areas.

Forklift Operator

Coca Cola (Iceland)
05.2002 - 12.2004
  • Safely loaded and unloaded trucks using appropriate forklift attachments, reducing the risk of accidents or injuries.
  • Kept warehouse clean and organized by removing debris and returning unused pallets to designated areas.
  • Improved warehouse efficiency by skillfully operating forklifts to move, locate, and stack materials.
  • Wrapped pallets in plastic wrap and attached merchandise tags to prepare for shipping.
  • Operated forklift in compliance with safety guidelines and organizational policies.
  • Operated equipment safely and efficiently to prevent damage to items and avoid injuries.
  • Maneuvered forklift safely using appropriate load rates and maintaining clear visibility of work areas.

Store Manager

Popeye's Chicken And Biscuits
09.1999 - 04.2002
  • Managed daily operations to ensure smooth functioning of the store, maintaining a clean, safe environment for customers and employees.
  • Managed inventory control, cash control, and store opening and closing procedures.
  • Addressed customer complaints promptly and professionally, resolving issues to maintain positive relationships with clientele.
  • Managed store employees successfully in fast-paced environment through proactive communication and positive feedback.
  • Assisted with hiring, training and mentoring new staff members.
  • Improved customer satisfaction through staff training in customer service and product knowledge.
  • Maintained proper product levels and inventory controls for merchandise and organized backroom to facilitate effective ordering and stock rotation.
  • Completed point of sale opening and closing procedures.
  • Mentored new hires during their onboarding process, ensuring they were well-equipped to excel in their roles from day one.
  • Rotated merchandise and displays to feature new products and promotions.
  • Maximized sales by creating innovative visual merchandising displays and store layouts.
  • Approved regular payroll submissions for employees.
  • Conducted regular performance reviews for staff members, providing constructive feedback and opportunities for growth.
  • Coached sales associates in product specifications, sales incentives, and selling techniques, significantly increasing customer satisfaction ratings.
  • Reconciled daily sales transactions to balance and log day-to-day revenue.
  • Fostered a positive work environment by cultivating strong relationships between team members through team-building activities and consistent recognition of individual achievements.

Education

Bachelor of Science - Business Management - Entrepreneurial Enterprise

AMA Computer University
Philippines
03.1996

Skills

  • Channel Letter Fabricator

  • Forklift Operator Certification

  • Chemical Production Operator

  • Train Conductor

  • Mechanical Assembly

  • Business Management

  • Marketing (Excellent)

  • Graphics Design

  • Digital Animations

  • Carpentry

  • Building Maintenance

  • Computer Assembly

Certification

*First AID & CPR/AED Level C

(Certificate number: 104796843)

Issued: 2024/02/23 Exp. 2027/02/22

*Fitness To Work Safety Critical Position.

Issued: 2022/11/21 Exp. 2026/11/13

*WHMIS

Issued: 2022/02/01 Exp. N/A

*TDG

Issued by: Univar Solutions Chemical Company.

Exp. 2026/02/14

*Forklift Operator Certificate

Issued: 2022/06/02 Exp. 2025/06/02

Languages

English
Professional Working
Filipino
Full Professional
Icelandic
Professional Working

Timeline

Train Conductor

CN Railway
12.2023 - 04.2024

Chemical Production Operator

Univar Solutions
12.2022 - 10.2023

Channel Letter Fabricator

Bannerz Canada Signs & Graphics
03.2022 - 03.2023

Forklift Operator

Manitoulin Transport
02.2022 - 04.2023

Forklift Operator

Rosenau Transport
09.2021 - 02.2022

Channel Letter Fabricator

YEG Signs And Graphics
03.2021 - 03.2022

General Assembler

Canadian Tire (Sub Contract)
01.2019 - 02.2021

Certified Kitchen Exhaust Technician/Gen. Mngr.

Zero De Grease Int.
02.2018 - 09.2019

Certified Kitchen Exhaust Technician

Charge-On International
09.2011 - 11.2018

Forklift Operator

Manitoulin Transport
02.2009 - 08.2011

Forklift Operator

IKEA (Norway)
01.2005 - 12.2008

Forklift Operator

Coca Cola (Iceland)
05.2002 - 12.2004

Store Manager

Popeye's Chicken And Biscuits
09.1999 - 04.2002

Bachelor of Science - Business Management - Entrepreneurial Enterprise

AMA Computer University

Similar Profiles

CREATE PROFILE
Spurgeon Locsin