Serhii Mykhaylenko
Welder
Edmonton,AB
Summary
Focused Job Title with Number years of experience. Skilled at working with metal and Tool with commitment to safety, efficiency and accuracy. Proven history of reliability and professionalism in Type situations. Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Overview
18
18
years of professional experience
Work History
Welder
RAVEN A.s.
Povazska Bystrica, Slovakia
12.2021 - 11.2023
- Fabricated shop parts directly from blueprints.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Chipped off excess weld, slag, and spatter using hand tools.
- Utilized blueprints and diagrams to compare finished products against design specifications.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Welded metal components in vertical, overhead and flat positions.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
- Welded various connections with high-quality final results.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Inspected welds for accuracy and conformance to specifications.
- Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
- Completed projects safely by closely monitoring conditions when lighting torches and using tools.
- Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
- Detected faulty operation of equipment and defective materials and promptly resolved issues.
- Replaced faulty parts and components in soldering process.
Welder
AB "ITAB Shop Concept Lithuania"
Kaunas, Lithuania
03.2017 - 02.2020
- Fabricated shop parts directly from blueprints.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Chipped off excess weld, slag, and spatter using hand tools.
- Utilized blueprints and diagrams to compare finished products against design specifications.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Welded metal components in vertical, overhead and flat positions.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
- Welded various connections with high-quality final results.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Inspected welds for accuracy and conformance to specifications.
- Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
- Completed projects safely by closely monitoring conditions when lighting torches and using tools.
- Evaluated and tested various soldering materials for accuracy.
- Detected faulty operation of equipment and defective materials and promptly resolved issues.
- Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
Welder
"Innox Standart"
Kyiv, Ukraine
10.2020 - 05.2021
- Fabricated shop parts directly from blueprints.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Chipped off excess weld, slag, and spatter using hand tools.
- Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
Welder
Plant Of Metal Structures And Metal Equipment
Chernihiv,Ukraine
11.2016 - 03.2017
- Welded in flat, horizontal, vertical, and overhead positions.
- Fabricated shop parts directly from blueprints.
- Prepared welding equipment to perform advanced welding work.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Chipped off excess weld, slag, and spatter using hand tools.
- Chipped away debris and thick crusts of rust, slag, and other materials to ready surfaces for welding.
- Cleaned material surfaces to remove dirt or excess acid using chemical solutions, wire brushes and grinders.
- Welded metal components in vertical, overhead and flat positions.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
Welder
"Zhezh-Ko"LLO
Chernihiv,Ukraine
09.2015 - 11.2023
- Welded in flat, horizontal, vertical, and overhead positions.
- Fabricated shop parts directly from blueprints.
- Chipped off excess weld, slag, and spatter using hand tools.
Welder
"Vimal"
Chernihiv, Ukrain
05.2014 - 09.2015
- Welded in flat, horizontal, vertical, and overhead positions.
- Fabricated shop parts directly from blueprints.
- Chipped off excess weld, slag, and spatter using hand tools.
Welder
LLO"Aurora"
Chernihiv,Ukraine
06.2007 - 05.2014
- Welded in flat, horizontal, vertical, and overhead positions.
- Fabricated shop parts directly from blueprints.
- Chipped off excess weld, slag, and spatter using hand tools.
Welder
LLO"Sporttekhnika Company"
Chernihiv
12.2005 - 06.2007
- Welded in flat, horizontal, vertical, and overhead positions.
- Fabricated shop parts directly from blueprints.
- Chipped off excess weld, slag, and spatter using hand tools.
- Welded metal components in vertical, overhead and flat positions.
Education
Electric Gas Welder 4 Categories - Metal Welding
Chernihiv Vocational Technical Shool Number 18
Chernihiv,Ukraine 03.2005
Skills
- Welding
- Fabrication
- Surface Preparation
- Stick Welding
- Blueprint Reading
- Torch Cutting
- Crane Operation
- Gas Metal Arc Welding
- Arc Welding
- MIG Welding
- Aluminum Metal Welding
- Hand and Power Tool Operation
- Post-Welding Treatment
Languages
English
Limited Working
Timeline
Welder
RAVEN A.s.
12.2021 - 11.2023
Welder
"Innox Standart"
10.2020 - 05.2021
Welder
AB "ITAB Shop Concept Lithuania"
03.2017 - 02.2020
Welder
Plant Of Metal Structures And Metal Equipment
11.2016 - 03.2017
Welder
"Zhezh-Ko"LLO
09.2015 - 11.2023
Welder
"Vimal"
05.2014 - 09.2015
Welder
LLO"Aurora"
06.2007 - 05.2014
Welder
LLO"Sporttekhnika Company"
12.2005 - 06.2007
Electric Gas Welder 4 Categories - Metal Welding
Chernihiv Vocational Technical Shool Number 18