My career objective is to seek a challenging position in a reputable organization where I can learn new skills, expand my knowledge and leverage learnings.
Overview
4
4
years of professional experience
Work History
Skilled Laborer
T.Luker Landscaping
Calabogie, ON
05.2023 - 11.2023
Operated power tools and equipment to complete assigned tasks.
Moved materials, supplies and equipment around the worksite as needed.
Conducted regular inspections of work areas to ensure safety standards were met.
Assisted in loading and unloading trucks with necessary materials for projects.
Utilized heavy machinery such as forklifts, cranes or backhoes to move large loads safely.
Cleaned up debris from construction sites after work was completed each day.
Installed insulation, drywall, roofing material, siding or other building materials as directed by supervisor.
Built retaining walls using stones or bricks for stability purposes.
Laid sod on prepared surfaces for a finished look of the landscape design.
Assisted in building decks and patios to create outdoor living spaces.
Cleaned up debris after completing jobsite tasks.
Performed preventative maintenance on equipment, including greasing, oiling, servicing engines and changing filters.
Loaded and unloaded trucks with excavated material for transport to designated areas.
Utilized GPS systems to accurately locate boundaries for excavation sites.
Conducted pre-operation checklists on all assigned machines prior to use each day.
Assisted in the setup of job sites by laying out stakes, flags. per project specifications.
Monitored operation of equipment to ensure proper functioning in accordance with safety regulations.
Followed established procedures for safely operating machinery while adhering to company policies at all times.
Conducted regular inspections of work area for hazardous conditions that could impact safe operation of equipment.
Apprentice Mechanic
Bonnechere Excavating Inc
Renfrew, ON
02.2021 - 09.2022
Diagnosed vehicle problems using computerized diagnostic equipment to pinpoint faults and malfunctions.
Repaired or replaced parts such as alternators, starters, water pumps, radiators, fuel pumps, ignition coils, and spark plugs.
Inspected vehicles for safety issues such as worn brake pads or fluid leaks.
Followed service schedules to perform regular maintenance on cars and trucks in accordance with manufacturer recommendations.
Performed basic maintenance and repair services on vehicles such as changing oil, replacing air filters, rotating tires, and inspecting brakes.
Assisted with more complex repairs including engine overhauls, transmission replacements, suspension work, and electrical system diagnostics.
Adjusted valves and timing belts; tightened bolts and screws; lubricated moving parts; replaced hoses and belts; tested components for proper operation.
Maintained records of all services performed on each vehicle along with the cost of labor and materials used.
Tested drive systems following repairs to ensure they were functioning properly before returning them to customers.
Operated hydraulic lifts safely when raising vehicles off the ground during repairs.
Cleaned shop area daily to maintain a safe working environment.
Disposed of waste according to local regulations.
Adhered strictly to safety protocols when handling hazardous materials.
Consulted with experienced mechanics for advice on difficult jobs.
Checked inventory levels regularly to ensure sufficient stock was available.
Ensured that all tools were in good condition before use.
Maintained neat, organized and professional personal and bay appearance.
Worked alongside technicians providing regular service, troubleshooting and upgrading equipment.
Inspected and test drove vehicles before returning to customers.
Operated shop equipment and mechanic's tools safely to prevent damage.I have some experience running the following equipment, 420 d caterpillar backhoe,930 caterpillar loader, 950 caterpillar loader, caterpillar rock truck, caterpillar forklift, load lifter forklift, telehandler and caterpillar skid steer, caterpillar mini x .I have experience time moving equipment in and out of the shop
Lumber Yard Worker
Castle Building Centre
Burnstown
06.2019 - 05.2021
Loaded lumber onto trucks for delivery to job sites.
Inspected and measured lumber for defects and dimensions.
Maintained inventory of lumber stock.
Assisted customers with selecting materials for their projects.
Cut wood to customer specifications using saws, planers, routers and other tools.
Organized the yard according to product type and size.
Stacked material in a safe manner on pallets or racks ready for shipment.
Cleaned work area daily including sweeping floors and organizing storage areas.
Operated forklifts, skid steers, man lifts and other equipment safely.
Transported material between locations using hand truck, dolly or forklift.
Provided support to fellow workers when needed.
Performed preventative maintenance on tools and equipment used in the yard.
Followed safety protocols while working in the yard environment.
Checked shipments against invoices to ensure accuracy of orders.
Unloaded incoming shipments from trucks manually or with machinery.
Education
OSSD graduate -
st joseph high SCHOOL
06.2021
Skills
Work Ethic
Problem solving
Teamwork
Learning
Punctual
Eager To Learn and Advance
Quick leaner
Multitasking
Maintenance and repair
Materials Organization
Power and hand tools
Hand and power tools
Activities
I enjoy being outdoors, my passions include hunting, fishing and anything outdoors. I have the following certifications. Chainsaw and quick cut safety as well as forklift certificate and WHIMS.
Owner/Lead Supervisor at Facebook, Little Lady Landscaping, Little Lady Landscaping LLCOwner/Lead Supervisor at Facebook, Little Lady Landscaping, Little Lady Landscaping LLC