Overview
Work History
Education
Skills
Languages
Timeline
Generic
Rommel N. Alcantara

Rommel N. Alcantara

Kitimat,BC

Overview

20
20
years of professional experience

Work History

Discipline Material Coordinator

Fresh Water, Tower and Wet
03.2018 - 02.2021
  • Surface Air Cooler (WSAC) Area (Unit 4200 and 4250) for Utility Area East as well as the Overall Electrical Material Controller
  • Currently the Focal Person for the said units and is responsible for Design Supervision for the ff: - S3D modeling activities for Cable tray, Lighting, Lighting Panels and EHT panels
  • Trayfill Calculations for both Cooling Tower and WSAC up to its Substation
  • Responsible for other omnibus activities such as preparing MPSU as one of the inputs for EZTrac Preparation
  • Type text]
  • Also, Presently working as the Overall Electrical Material Controller and is responsible for: - Preparation of Key Quantity Reports for all Electrical items under POC (Manila) scope
  • Preparation of BOM and MR of electrical items via Matman that will be used in preparing Engineering requisitions, preparation and maintenance of electrical bulk materials and tagged items, as well as assembly catalogs
  • Electrical focal person on Material Quantity Management System (MQMS) Reporting that reports the Key
  • Quantities in Electrical discipline used to monitor the health of the project in terms of cost and progress.

Electrical Associate Design Engineer

Minera Lumina Copper Chile
  • Fluor Caserones Copper Plant Project

Electrical Design Engineer I

Fluor Amursky Gas Processing Plant – Non Licensed
07.2017 - 02.2018
  • (CPECC)
  • Fluor Amursky Gas Processing Plant – Non License Units

Electrical Drafter

III Dow Chemical Company
  • Fluor Olefins II Petrochemical Complex

Electrical Drafter

II ConocoPhillips China Inc
  • Fluor Bohai Development Phases I & II

Electrical Drafter

I Woodside Energy Ltd

Electrical Construction Coordinator/Supervisor

LNG CANADA PROJECT, Kitimat
10.2023 - Current
  • Presently working as Electrical Construction Coordinator for Electrical Discipline at Kitimat Construction Site
  • Performed the following duties and responsibilities: - Create Certificate of Notice of Energization for EHT systems
  • Provided technical support to vendors and contractors for the completion of Inspection Test Reports (ITR’s) and resolution of Mechanical Completion Punch items
  • Participated in Pre Mechanical Completion and Mechanical Completion walkdowns of different systems in support to its energization
  • Coordination of site work with other disciplines to facilitate completion of systems
  • Resolve ITR punches from QC and MC walkdown punches from client
  • Provide progress report to Construction Managers
  • Coordinate and authorize isolation and de-isolation of electrical equipment
  • Initiated and prepared RFI to reconcile discrepancies between drawings and actual site condition / installation
  • Validated closed ITR’s and Punches vs actual installation done in site
  • Updated Electrical Heat Trace Set point schedule based on latest redlines/field sketches to be used by contractors to correctly program EHT control panels.

Deficiency Coordinator

Fluor LNG CANADA PROJECT, Kitimat
10.2022 - 10.2023
  • Worked as Module Defect and Deficiency Coordinator for Electrical Discipline at Kitimat Construction Site
  • Performed the following duties and responsibilities: - Preparing and consolidating redline drawings into packages for each module (PARs and PAUs); - Reviewing work packages prepared by remote work locations for execution at the - project site to verify and validate extent of scope to be completed;
  • Organizing and participating in construction module walkdowns (not final walkdowns) to identify defects and deficiencies in design and / or with installed and constructed module elements; - Interpreting the intent and requirements of the design documents and information; - Ensuring as-built condition of the modules are correctly reflected in the punch lists; - Auditing modules for discrepancies which may exist between design and the as-built condition and punch lists; - Compiling, consolidating, and tracking module defects and deficiencies, and coordinate the validation of defects with Technical Services / Field Engineering for inclusion into the completions database; - Tracking, reviewing, and assisting in the approval of the repairs to any defects and deficiencies to achieve the required level of completion; - Maintaining working knowledge of applicable codes, standards, and specifications for the project; - Preparing material take-offs as well as initiate and prepare requisitions for the procurement of services, materials, and equipment necessary to support the project schedule; - Assisting the Lead regarding update of walkdown progress via Smartplant Construction (SPC)
  • Preparing Deficiency reports as part of data to be placed in MCPlus that will be the main document needed by Construction to facilitate punchlists
  • Planning and organizing own work assignments, as well as carry out tasks from management staff; - Adhering to and support the project HSSE policies and objectives; - Performed quality checking of modules for design compliance
  • Identified deficiencies to design requirements and provided solutions for Technical Service (Field Engineering) and Construction
  • Coordinators (Supervisors) approval and implementation
  • Type text] - Validated SLD mark ups vs Actual installed components in site ( fuse rating, nameplate data) for
  • SS003,SS005,SS007, SS010 and EDG - Managed the following activities performed of the Remote Crew in Manila but not limited to: - Conducting meetings regarding progress of deliverables and answering querries in a needly basis - Checking of deliverables before submission - Raised MCplus punches for the deficiencies found and checked and approved the works performed by subcontractors to close said punches for ISBL (YOC scope) and OSBL (COC Scope) as well as signing punch cards as approver and close them in MC Plus
  • Prepared and Updated SID’s for EHT via Matman: and - Other duties as assigned by Technical Services/Field Engineering.
  • Completed paperwork, recognizing discrepancies and promptly addressing for resolution.
  • Organized and detail-oriented with a strong work ethic.
  • Provided professional services and support in a dynamic work environment.
  • Learned and adapted quickly to new technology and software applications.
  • Assisted with day-to-day operations, working efficiently and productively with all team members.
  • Demonstrated respect, friendliness and willingness to help wherever needed.

Electrical Design Engineer

Intel, Fluor Intel Falcon
02.2022 - 10.2022
  • Was responsible for the Lighting Calculation, Modeling and Layout for the Cleanroom area for Phase 0.5, Phase Phase 2 and Phase 3 using Dialux Lighting Calculation software, Revit and AutoCad
  • Prepared 2D layout for Electrical Busduct Layout as well as Cable tray layout using Revit and AutoCad.

Electrical Design Engineer

Fluor LNG CANADA, Kitimat
03.2019 - 02.2022
  • The LNGC Project includes the design, construction and operation of a natural gas liquefaction plant, utilities, and storage facilities, including port construction with marine off-loading facilities and shipping capability
  • The
  • LNGC Plant (Plant) will initially consist of two (2) identical liquefaction trains, each with a capacity to produce 6.5 million tonnes per annum (mtpa) of LNG, based on the average gas composition, with an option to expand the
  • LNGC Project in the future with two (2) additional trains (Phase II Works) resulting in an ultimate capacity of 26 mtpa LNG
  • The LNGC plant will be located in Kitimat, adjacent to the Rio Tinto Alcan (RTA) smelter
  • Kitimat is a coastal community in northern British Columbia, approximately 650 kilometres northwest of Vancouver
  • Kitimat is located at the head of the Douglas Channel, which provides a deep-water, wide, sheltered and ice-free shipping route throughout the year.

Coordinator and Electrical

Svobodny, Amur
07.2018 - 02.2019
  • Construction Coordinator
  • Additional Experience includes portfolio assignment being the Manila Chairman for the 2008 National Engineer’s Week
  • Knowledgeable in Computer Aided Design, Microstation, Plant Design System (PDS)
  • Luxicon, Chalmlite, AGI32 Lighting Calculation Software, WinRGPLAN, Smart Plant
  • Review (SPR), Smartsketch, S3D, PDS2D, MATMAN ( Material Manager),Nucleus
  • Smartplant Construction, MCPlus, Jovix, MS Office, Lotus Notes
  • Also trained in
  • Smartplant Electrical, E3D and PDMS
  • Involved in projects using DOW, BASF, Russian
  • Canadian, NEC and IEC standards., The Amursky Gas Processing Plant (AGPP) Construction Project, located in Far Eastern Russian Federation of the Amur Region, will process up to 42 blnSm3/yr (7 blnSm3/yr for each of the 6 trains) of natural gas
  • Once in operation it will be the largest such plant in Russia and one of the biggest in the world
  • Responsible for Design activities of the Project in Manila such as: - E3D modeling activities such as Raceways (Cable Tray), Equipment (Lighting and small power), Dummy supports
  • Performed Electrical Development and Design layouts such as Earthing Layout using E3D Draw and MTO using Autocad as well as Cable tray sizing
  • Prepared and issued 2D drawings such as Cable Tray Layout, Cable Routing layout, Aboveground layout
  • Earthing Layout and Lighting Layout with their respective MTO for Unit 30, Unit 60 and unit 70 using E3D and
  • AutoCAD
  • Prepared Non- Physical layout deliverables such as Schematic Diagram for Unit-30 APCS building lighting and for Unit 60 Internal Piperack.

Electrical Design Engineer

Electrical Generation Authority of Thailand (EGAT), Fluor FSRU Consultancy Services
06.2018 - 07.2018
  • Fluor to provide Feasibility study and FEED for a Lump Sump FRSU project that will supply of additional 5 MTPA of Liquified Natural Gas to its existing CCGT Power Plants
  • Was Responsible for Design activities of the Project in Manila such as: - Updating 2D drawings for Hazardous Area Classification (HAC), Aboveground/Underground Cable Routing &
  • Electrical Room Layout for Metering Station, Jetty Topsides, & Shore Approach/Block Station using Autocad
  • Updating Load list and Electrical Specifications.

Electrical Design Engineer

Marathon Petroleum Corporation, Fluor Marathon STAR, GBR & TRD Plant
03.2018 - 06.2018
  • Fluor is performing Engineering and Procurement services to support the STAR Program
  • Type text]
  • Was Responsible for Design activities of the Project in Manila such as: - S3D modeling activities such as Raceways (Cable Tray, Conduit)
  • Performed Electrical Development and Design layouts such as Cable Tray layout, Above Ground layout using
  • Smartsketch.

Electrical Design Engineer

Marathon Petroleum Corporation
10.2017 - 03.2018
  • Fluor Tier 3 Galvestone Bay Refinery Project, Fluor is performing Engineering and Procurement services to support the Tier 3 ULSG
  • The project includes new000 BPD Naphtha Desulfurization (NDU), a new 35,000 BPD Selective Hydrogenation Unit (SHU), a several revamps and all associated OSBL scope at the Galvestone Bay Refinery (GBR) and the Texas Refining Division (TRD)
  • Was Responsible for Design activities of the Project in Manila such as: - S3D modeling activities such as Raceways (Cable Tray, Conduit) and Equipment Modeling
  • Performed Electrical Development and Design layouts such as Cable Tray layout, Above Ground layout and
  • Small Power layout using Smartsketch
  • Performed Conduit Routing activities for AboveGround and Lighting/Small Power layout using Smartsketch.

Electrical Design Engineer

Duke Energy, Fluor Citrus County Combined Cycle
01.2015 - 08.2017
  • Fluor was selected by Duke Energy to provide engineering, procurement and construction services for the combined cycle, gas fueled 1,640-megawatt Citrus County Combined Cycle Project in Crystal River, Florida
  • Was Responsible for Physical Layout activities of the Project in Manila such as: - PDS modeling activities such as Raceways (Cable Tray, Ductbank and conduit) and Equipment Modeling
  • Performed Design layouts such as Grounding layout, Underground Layout, Cable Tray layout, Street Lighting and above ground layout using Microstation
  • Performed Non Physical Layouts such as Connection Diagram for DCS I/O Termination using ETools and
  • Microstation
  • Prepared PDS set up for Manila including Drawing and PDS model creation during project alignment in
  • Charlotte - Prepared Drawing extraction of all Physical Layout ( Underground, Grounding, Lighting, Cable Tray and
  • Aboveground power) in Manila
  • Worked as Part time checker assisting the overall Manila Lead in checking for Grounding layout, Underground layout and Cable Tray layout drawings
  • Performed Cable Routing activities from DCS to Marshaling Cabinets as well as Power Cables, Control cables and Heat tracing cables using Nucleus.

Electrical Design Engineer

DOMINION ENERGY INC, Greensville County Power Station
04.2016 - 02.2017
  • Fluor provided Engineering and Procurement services for the Greensville County Power Station
  • Worked as Back-up Lead and responsible for Physical Layout activities of the Project in Manila such as: [Type text] - PDS modeling activities such as Major Equipments under Manila scope
  • 2D layouts such as Grounding layout, Underground Layout Lighting Layout and Section Details using
  • Microstation - Prepared Drawing extraction of all Physical Layout ( Underground, Grounding, Lighting, Cable Tray and
  • Aboveground power) in Manila
  • Worked as Part time checker assisting the overall Manila Lead in checking for Grounding layout, Underground layout and Cable Tray layout drawing

Electrical Design Engineer

Duke Energy, Fluor W. S
01.2015 - 04.2016
  • Lee Combined Cycle Project, Fluor was selected by Duke Energy to provide engineering, procurement and construction services for the combined cycle, gas fueled 750-megawatt W
  • S
  • Lee Combined Cycle Project in Belton, South Carolina
  • Worked as Back-up Lead and responsible for Physical Layout activities of the Project in Manila such as: - PDS modeling activities such as Underground Ductbank (while in Charlotte alignment); Cable Tray, Lighting
  • Major Equipments and Small Power while in Manila
  • Performed Design layouts such as Grounding layout, Underground Layout, Cable Tray layout Street Lighting and above ground layout using Microstation - Prepared PDS set up for Manila including Drawing and PDS model creation during project alignment in
  • Charlotte - Prepared Drawing extraction of all Physical Layout ( Underground, Grounding, Lighting, Cable Tray and
  • Aboveground power) in Manila
  • Worked as Part time checker assisting the overall Manila Lead in checking for Grounding layout, Underground layout and Cable Tray layout drawings.

Electrical Associate Design Engineer

Abu Dhabi Oil, Fluor Abu Dhabi Gas Liquefaction Company Limited
10.2014 - 11.2014
  • Provided MTO estimate of Protection Equipment for the Key SLD.

Electrical Associate Design Engineer

Columbian Chemicals, Fluor Columbian Carbon Black
09.2014 - 10.2014
  • Provided MTO validation and Estimate for Cable Trays, Lighting and Small power and Welding outlet

Electrical Associate Design Engineer

BASF Petronas Chemicals, BPC, Fluor Integrated Aroma Ingredients Chemical Complex, Kuantan, Gebang Industrial
04.2014 - 09.2014
  • Fluor provided front-end design , detailed engineering, procurement, and construction management work for
  • Phase 2 of the Integrated Aroma Ingredients Complex
  • Phase 2 synthesizes the product of Lemongrass Phase 1 (Citral) to produce menthol which is the top selling aroma ingredient worldwide in terms of sales volume
  • Performed Cable Tray Modeling and Equipment modeling (sand box, Electrical Equipments, Control Stations and Lighting Fixtures) for Menthol Process area, Menthol Drum Filling and Menthol Tank Farm using PDS from
  • FEED to EOE
  • Prepared MTO of Cable Tray and it's accessories during FEED
  • Prepared Equipment Layout for C416 Menthol
  • Rack Room during EOE
  • Type text]

Electrical Associate Design Engineer

III Sadara Chemical Company, Fluor Sadara, Al
01.2012 - 12.2013
  • The Sadara petrochemicals complex is the largest single-phase development in the world and the most complex chemicals project executed by Fluor with 26 new process units and a planned investment of $20 billion
  • Fluor performed EPCM services for the utilities, power, interconnecting pipe racks and waste treatment assets - Overall Manila Electrical Material Management Specialist responsible for all MATMAN related activities of the project including but not limited to Bulk and Tagged Item encoding, Electrical Bill of Material (EBOM), Requisition
  • Bill of Material (RBOM) preparing item reports, creating assemblies, etc
  • Prepared BOM for Tagged and Bulk Items for Interconnecting Facilities, Power Distribution and for Steam
  • Generation Unit
  • Assisted with lead office in preparation and updating of Requisition of Bulk Materials, Cable Trays and Cables as well as, Electrical Heat tracing cables
  • Prepared and submitted Material Requisitions up to Purchase Order (PO) for Power Cables, Lighting Fixtures
  • Electrical Bulks and Cable trays
  • Updated and modified Electrical Load list
  • Assisted and Trained Electrical Material Controllers
  • Preparing and updating monthly Material Status Reports
  • Updated and incorporated MCT drawings
  • Prepared Cable Tray Layout using Smartsketch

Copper

EPCM services
11.2010 - 12.2011
  • Fluor was awarded a contract by Minera Lumina, Chile to deliver, for the company's new
  • Caserones copper mine project in central Chile
  • The $1.3 billion project includes a copper flotation processing plant, with an annual capacity of 3.6 million tons of fine copper and 87 kilotons of molybdenum
  • Acted as DAS for the Caserones Electrical Team and MTO Controller
  • Other main activities involved were: -Lighting calculations for WBS 2100,2200,7150,9400 using AGI32 Lighting Calculation software
  • Performed and updated lighting modeling activities for all areas and also performed raceway modeling (conduit) for WBS 5100, 5200 and 7200
  • Performed extraction of drawings and doing MTO for lightning, Power, Lighting and Cable Tray
  • Prepared and updated 2D lighting layout including Voltage Drop Calculations, Panelboard Schedule and MTO for WBS 5100,5150,7150,7200,8300 and 9400
  • Prepared and updated 2D Drawings for Power and Cable Tray
  • Prepared and updated Street Lighting Layout for WBS 4500, 8300 and 9400
  • Prepared and updated Power and Cable Tray layout for WBS 5150,5100 and 3200
  • Prepared and updated BOM of Lighting, Cable Tray, Lightning Protection and Power using MATMAN.

Electrical Associate Design Engineer

Minera Lumina Copper, Fluor Caserones Copper
07.2010 - 09.2010
  • Fluor was awarded a contract by Minera Lumina Copper Chile to deliver EPCM services for the company's new
  • Caserones copper mine project in central Chile
  • The $1.3 billion project includes a copper flotation processing plant, with an annual capacity of 3.6 million tons of fine copper and 87 kilotons of molybdenum
  • Was involved in Project Alignment meetings and start up activities
  • Responsible for Physical Layout activities such as: -Equipment modeling Electrical Rooms for 3400-ER-101, 4100-ER-101 and 4250-ER-101 using PDS
  • Updated and incorporated Substation Plans for 3200-ER-101, 4100-ER-101, 4250-ER-101, 8300-ER-002, 8300- [Type text]
  • ER-003, and Transformers using Microstation
  • Updated and incorporated installation details for Lighting Protection (Pararayos) Non Corrosive Cable Trays (Escalerias No Corrosivo), and Electrical Symbols ( Symbologias) as well as Single Line Diagrams.

Electrical Associate Design Engineer

BASF CORPORATION
02.2010 - 03.2010
  • Fluor BASF Prog (Wolverine, BACK, Villanova, Alameda
  • Pre-FEED, FEED, EP, CM, various), The following projects are completed or in progress
  • All projects are cost reimbursable with key performance indicator incentives
  • Project Wolverine - FEED and EP scope
  • Project BACK - FEED and EPCM scope
  • Project
  • Villanova - FEED scope
  • Project Alameda -FEED scope
  • Responsible for providing and updating Class 3 MTO estimate for items such as Cable Tray and its accessories and Lighting for WBS B260,B310,C310 and C320

Electrical Associate Design Engineer

Santos Ltd, Fluor Gladstone LNG Upstream FEED-DFP
01.2010 - 02.2010
  • For the world's first project to convert coal-seam gas to liquefied natural gas, Fluor performed front-end engineering and design services
  • Created and Updated Equipment Load Schedule for F-HCS-04,F-CS-03,F-NCS-04

FEED, DFP
08.2009 - 09.2009
  • For the world's first project to convert coal-seam gas to liquefied natural gas, Fluor performed front-end engineering and design services
  • Prepared MTO of Bid for EPC for items such as Cable Tray and its accessories, Cables, and Lighting
  • Prepared
  • Lighting Calculations for Lighting MTO using Luxicon.

Electrical Associate Design Engineer -II

BASF-YPC Co. Ltd
01.2009 - 02.2009
  • BYC)
  • Fluor IPS Expansion Project (IPS II), IPS II is the second phase investment project comprising new production plants and plant expansions, support of the expansion of utilities and auxiliary facilities inside the production area, and expansion of storage and transportation facilities
  • Responsible for providing and updating Class 3 MTO estimate of Power Cables for Area 1 and Area 6
  • Act as
  • MTO System Supervisor for Power cables.

Electrical Associate Design Engineer

Petrochemical Company, Fluor Petrochemical Complex - U&O
02.2007 - 12.2008
  • Fluor is responsible for engineering, procurement, and construction management of the utilities, offsites, off-plots, buildings and infrastructure for one of the largest petrochemical projects in the world - one of a series of large projects built by SABIC, a global leader in the petrochemical industry
  • Type text]
  • Responsible for cable tray, underground cable trench, lighting and equipment modeling using PDS
  • EERaceway and PDS Equipment Modeling
  • Port area DAS (Discipline Application Specialist) responsible for project CAD execution and software usage
  • Responsible for extraction and preparation including MTO of drawings for grounding layout, power layout, lighting and small power layout, electrical trench layout, security lighting layout and street lighting layout using PDDRAW and MicroStation
  • Responsible for lighting calculations in street lighting and process areas for port area (WBS 861 and 863) using Luxicon
  • Responsible for cable tray layout (WBS 861) and power layout drawings (WBS 863)
  • Incorporated and updated power, lighting and grounding layout drawings for interconnecting piperack (WBS 842)
  • Incorporated Hazardous Area Classification
  • Layout for Port Area.

Shuaiba
04.2006 - 02.2007
  • Fluor provided overall management consultancy and front-end engineering services for an 850,000 tons per year ethylene cracker, a 600,000 tons per year ethylene glycol unit, and a 450,000 tons per year ethyl benzene/styrene monomer unit, as well as debottlenecking expansion for an additional 225,000 tons per year of polyethylene capacity
  • Responsible for grounding layout and preparation of MCT (Multi Cable Transit) for switchgears and power transformers for M2 contract
  • Responsible for preparation and incorporating of installation details, cable tray tagging and connection diagrams
  • Responsible for lighting calculations and lighting layout for utility substation and SRU substation using Chalmlite and MicroStation.

Offshore Bohai
08.2005 - 04.2006
  • Phase I of this offshore oil field development was the design package for a fixed production platform tied to a refurbished FPSO; Phase II was the 190,000-BOPD full field development with five additional platforms, interconnecting sub-sea pipelines, and a new-build FPSO
  • Platts, in its Premier Projects category, awarded Fluor the Engineering Project of the Year for this project
  • Responsible for creating spreadsheets and drawings for weight control of cable trays using MS Excel
  • MicroStation and AutoCAD for outside and inside building for all modules
  • Responsible for Material Take-Off (MTO) for grounding and cable trays
  • Responsible for incorporating drawings for grounding, cable tray and power layout for outside buildings using MicroStation.

Electrical Drafter

II Dow Chemical Company, Fluor, Shuaiba
06.2005 - 07.2005
  • Fluor provided overall management consultancy and front-end engineering services for an 850,000 tons per year ethylene cracker, a 600,000 tons per year ethylene glycol unit, and a 450,000 tons per year ethyl benzene/styrene monomer unit, as well as debottlenecking expansion for an additional 225,000 tons per year of polyethylene capacity
  • Loaned to piping department as part of New Graduates Training Program
  • Responsible for creating and incorporating pipe support specification details and pipe support fabrication detail drawings using MicroStation
  • Attended basic piping trainings as part of New Grads Program.

Electrical Drafter

ConocoPhillips, Fluor Sweeny
02.2005 - 04.2005
  • Ultra Low Sulfur Diesel Project, Fluor performed front-end engineering, detailed engineering, procurement, and construction management of a sulfur reducing program for a $170 million ULSD project featuring a common design of a 70,000-BPD hydrotreater with another of the client's refineries
  • Loaned to control systems department as part of New Graduates Training Program
  • Activities involved were: - Responsible for creating and incorporating instrument installation details specifically instrument electrical hook- up drawings using AutoCAD
  • Created an informative spreadsheet needed for the instrument index’ electrical conduit summary for various instruments.

Electrical Drafter

I Dow Chemical Company and Petrochemical Industries, Fluor Company, Olefins II Petrochemical Complex
11.2004 - 01.2005
  • Fluor provided overall management consultancy and front-end engineering services for an 850,000 tons per year ethylene cracker, a 600,000 tons per year ethylene glycol unit, and a 450,000 tons per year ethyl benzene/styrene monomer unit, as well as debottlenecking expansion for an additional 225,000 tons per year of polyethylene capacity
  • Loaned to process graphics as part of New Graduates Training Program
  • Activities involved were: - Responsible for incorporating Process Flow Diagrams (PFD’s) and P&ID’s using MicroStation and
  • AutoCAD
  • Attended basic process and mechanical trainings as part of New Grads Program.

Electrical Drafter

ConocoPhillips, Fluor Billings Ultra Low Sulfur Diesel
09.2004 - 10.2004
  • The project consisted of an ultra low sulfur diesel hydrotreater and sour water stripper units, as well as a 15- million-SCFD hydrogen plant that had been engineered and designed by another contractor
  • The FEL-2 & FEL-3 phases were executed on a cost plus basis, and EPCM was executed as a lump sum contract
  • Loaned to CSA department as part of New Graduates Training Program
  • Activities involved were: -Responsible for incorporating foundations for pump and transformers, miscellaneous pipe supports (MPS) and miscellaneous electrical supports (MES) using MicroStation
  • Attended basic CSA trainings and softwares as part of New Grads Program.

Registered Electrical Engineer

Fluor Woodside
06.2004 - 07.2004
  • The floating production, storage, and offloading (FPSO) facility is part of Woodside Energy Limited's Enfield Area
  • Development
  • The FPSO facility is 25 miles off the Western Australia coast, near Exmouth
  • It processes up to000 barrels of oil per day (bpd)
  • Fluor and joint-venture partner AMEC performed FEED
  • Engineering and procurement services were provided from the Enfield project office in Perth, with support from Fluor offices in, , Texas, and Manila, the Philippines, and from the AMEC office in Aberdeen, UK
  • Worked as Drafter and responsible for Physical Layout activities such as: [Type text] - Responsible for incorporating cable rack layout and cable rack support standard details using MicroStation
  • Responsible for extraction of drawings using PDDRAW
  • Attended basic electrical and control systems training as part of New Grads Program
  • Licenses, Certifications and Clearances:

F
- 01.2003
  • NCS-04-02 and R-NCS-

Electrical Associate Design Engineer

Santos Ltd
- 01.2002
  • Updated Cable Schedule for NCS-05-03 and NCS-04-03

Design Engineer II

02.2024 - 1 1
  • Has more than twenty (20) years of working experience in the field of Electrical
  • Engineering
  • Experience includes detailed design and engineering, material take-off and
  • Construction coordination for Chemicals, Offshore facilities, Mining, Power and Oil & Gas production projects to be built abroad
  • Was a part of New Graduates Program, which is the Engineering Training Program, held in FDIP that includes intensive training and multitasking roles in both engineering and design in different engineering disciplines
  • Positions held include Back up Lead, Design Supervisor, Overall Material Controller
  • Process Graphics designer, DAS (Discipline Application Specialist) Electrical Designer and Drafter
  • Involved in Project Alignment meetings in different Fluor offices (Santiago
  • Farnborough and Charlotte)
  • Experienced Site Visit in Virginia for Brunswick County
  • Power Project and Site assignment in Kitimat, B.C for LNG Canada Project
  • Activities done throughout projects involved were PDS Project set up (Electrical), PDS
  • Modeling activities (raceway, equipment modeling),S3D modeling activities, 2D layout drawings (Underground, Grounding, Lighting, Aboveground, Cable Tray) using
  • Microstation and Smartsketch
  • E3D modeling activities and 2D layout drawings ( Earthing
  • Cable Tray, Lighting, AboveGround),Lighting calculations, Updating P&ID's via
  • Smartsketch and PDS2D, MTO Class 3 estimate, Material Take-off via MATMAN software, part-time checker, Vendor Document Reviews, Cable Routing, Panel Board Schedule
  • Duct bank sizing, DCS I/O Terminations, Lighting Schematic Diagrams, Discipline Material
  • Coordinator, Design supervisor, Back-up Lead, Module Defect and Deficiency

Education

B.S - Electrical Engineering

Polytechnic University of the Philippines

Skills

  • Fluent in Language
  • Problem Resolution
  • Calm Under Pressure
  • Good Telephone Etiquette

Languages

English
Professional Working

Timeline

Design Engineer II

02.2024 - 1 1

Electrical Construction Coordinator/Supervisor

LNG CANADA PROJECT, Kitimat
10.2023 - Current

Deficiency Coordinator

Fluor LNG CANADA PROJECT, Kitimat
10.2022 - 10.2023

Electrical Design Engineer

Intel, Fluor Intel Falcon
02.2022 - 10.2022

Electrical Design Engineer

Fluor LNG CANADA, Kitimat
03.2019 - 02.2022

Coordinator and Electrical

Svobodny, Amur
07.2018 - 02.2019

Electrical Design Engineer

Electrical Generation Authority of Thailand (EGAT), Fluor FSRU Consultancy Services
06.2018 - 07.2018

Discipline Material Coordinator

Fresh Water, Tower and Wet
03.2018 - 02.2021

Electrical Design Engineer

Marathon Petroleum Corporation, Fluor Marathon STAR, GBR & TRD Plant
03.2018 - 06.2018

Electrical Design Engineer

Marathon Petroleum Corporation
10.2017 - 03.2018

Electrical Design Engineer I

Fluor Amursky Gas Processing Plant – Non Licensed
07.2017 - 02.2018

Electrical Design Engineer

DOMINION ENERGY INC, Greensville County Power Station
04.2016 - 02.2017

Electrical Design Engineer

Duke Energy, Fluor Citrus County Combined Cycle
01.2015 - 08.2017

Electrical Design Engineer

Duke Energy, Fluor W. S
01.2015 - 04.2016

Electrical Associate Design Engineer

Abu Dhabi Oil, Fluor Abu Dhabi Gas Liquefaction Company Limited
10.2014 - 11.2014

Electrical Associate Design Engineer

Columbian Chemicals, Fluor Columbian Carbon Black
09.2014 - 10.2014

Electrical Associate Design Engineer

BASF Petronas Chemicals, BPC, Fluor Integrated Aroma Ingredients Chemical Complex, Kuantan, Gebang Industrial
04.2014 - 09.2014

Electrical Associate Design Engineer

III Sadara Chemical Company, Fluor Sadara, Al
01.2012 - 12.2013

Copper

EPCM services
11.2010 - 12.2011

Electrical Associate Design Engineer

Minera Lumina Copper, Fluor Caserones Copper
07.2010 - 09.2010

Electrical Associate Design Engineer

BASF CORPORATION
02.2010 - 03.2010

Electrical Associate Design Engineer

Santos Ltd, Fluor Gladstone LNG Upstream FEED-DFP
01.2010 - 02.2010

FEED, DFP
08.2009 - 09.2009

Electrical Associate Design Engineer -II

BASF-YPC Co. Ltd
01.2009 - 02.2009

Electrical Associate Design Engineer

Petrochemical Company, Fluor Petrochemical Complex - U&O
02.2007 - 12.2008

Shuaiba
04.2006 - 02.2007

Offshore Bohai
08.2005 - 04.2006

Electrical Drafter

II Dow Chemical Company, Fluor, Shuaiba
06.2005 - 07.2005

Electrical Drafter

ConocoPhillips, Fluor Sweeny
02.2005 - 04.2005

Electrical Drafter

I Dow Chemical Company and Petrochemical Industries, Fluor Company, Olefins II Petrochemical Complex
11.2004 - 01.2005

Electrical Drafter

ConocoPhillips, Fluor Billings Ultra Low Sulfur Diesel
09.2004 - 10.2004

Registered Electrical Engineer

Fluor Woodside
06.2004 - 07.2004

B.S - Electrical Engineering

Polytechnic University of the Philippines

Electrical Associate Design Engineer

Minera Lumina Copper Chile

Electrical Drafter

III Dow Chemical Company

Electrical Drafter

II ConocoPhillips China Inc

Electrical Drafter

I Woodside Energy Ltd

F
- 01.2003

Electrical Associate Design Engineer

Santos Ltd
- 01.2002

Similar Profiles

CREATE PROFILE
Rommel N. Alcantara