Randy Sager
London,Canada
Summary
Dependable Laborer experienced in operating heavy machinery and performing physical tasks across diverse environments. Achieved high productivity through effective communication and teamwork while adhering to strict safety protocols. Focused on contributing to project success and maintaining efficient workflows.
Overview
1
1
Certification
38
38
years of professional experience
Work History
Labourer
Trojan Technologies
London, Canada
10.2021 - Current
- Assembled, built, and tested UV water treatment vessels to ensure functionality and compliance with specifications.
- Using cranes to flip and move vessels.
- Conducted quality checks to uphold safety and functionality standards for water treatment vessels., safety, picking parts for kits that accompany vessels.
- Collaborated in Shanghai, China, to finalize a water purification system, contributing to international project success.
- Testing finished vessels to be signed off and shipped out by doing pressure and wipe tests.
- Use fork trucks to move vessels and packed parts to shipping department.
Labourer
Presstran
St. Thomas, Canada
01.2019 - 09.2019
- Load casting into weld cells, Ensured quality standards were met during production processes., Promoted safety measures to enhance employee well-being., Performed cleaning tasks to maintain a tidy and organized work environment., Managed material handling processes to ensure efficient workflow..
- Operated machinery for installation and maintenance of water treatment systems.
- Assisted team in assembling equipment for wastewater management projects.
- Maintained a clean and organized work environment at project sites.
Labourer
GM Cami
Ingersoll, Canada
07.2015 - 11.2018
- Installed brake lines, nuts, bolts, and trim pieces on chassis line using rivet guns, drills, and torque wrench to ensure proper assembly.
- Ensured quality control by inspecting welds and part placements.
- Operated machinery for water treatment processes and equipment maintenance.
- Collaborated with team to ensure compliance with safety standards and protocols.
Labourer
Hanwha LLC
London, Canada
12.2014 - 07.2015
- General duties, making pigments, cleaning mixers, crumblers, Operated production deck efficiently, changeovers, setting gaps, quality checks, transport of dangerous goods.
- Installing and removal and cleaning of resin valves, material handling.
- Installed, removed, and cleaned resin valves while managing material handling.
Material Handler/coil setter
NASG
Woodstock, Canada
08.2014 - 11.2014
- Staged tools and materials for production, moved totes, set steel coils for stamping press, performed tool changeovers and rebanded coils using cranes and lift trucks.
- Our changeover times improved by 4% since being hired, and coils and next tools for changeovers are staged ahead of time.
- Operated forklifts to transport materials across warehouse areas.
- Loaded and unloaded shipments to maintain inventory flow.
- Organized materials in designated storage areas for easy access.
Labourer
J.B.Trucks
London, Canada
05.2011 - 07.2014
- Duties - tire changes, Conducted oil and filter changes to enhance engine longevity., Executed assembly tasks to ensure product quality and functionality., Selected and organized parts for efficient assembly processes., Performed cleaning tasks to maintain a safe and organized workspace., Conducted general repairs to ensure equipment functionality and safety..
- Maintained cleanliness and organization of work areas and equipment.
- Operated machinery to assist in water treatment processes.
- Maintained cleanliness and organization of work areas and equipment.
- Assisted in loading and unloading materials for production.
Injection molding set up technician
Bayshore plastics
London, Canada
10.2013 - 03.2014
- Open the plant up, turn all equipment on, set up injection molding machines, startup, shutdown, tool changes, troubleshooting issues, safety, training employees, trialing new tools, worked with overhead hoists, cranes, lift trucks, loading, unloading, shipping.
- I've assumed the role of supervisor when hired. I've set up new injection molding tools in presses and programmed machines to run product.
- Change over presses for production requirements, troubleshooting issues with tools and machines.
- Performed regular preventative maintenance on equipment to ensure optimal performance.
Set up technician
FPE
Stratford, Canada
07.2013 - 10.2013
- Injection mold set up, programming machines, robots (end of arm tool) start up and shut downs, Conducted quality inspections to ensure product standards were met., Monitored safety compliance to safeguard team members and equipment..
- Set up machinery and equipment for production processes.
- Conduct routine inspections to ensure operational efficiency.
- Collaborate with team members to troubleshoot technical issues.
Landscaper
Sager Total Lawn Care
Lambeth, Canada
03.2012 - 08.2013
- Performed duties as a driver, including Conducted seasonal cleanup of outdoor areas, Maintained lawns by cutting grass regularly, Performed tree trimming for aesthetic improvement, Installed sod to enhance landscape appearance, Implemented landscaping designs for outdoor spaces, dethatching, aerating, and cleaning eaves troughs.
- Maintained landscapes through mowing, trimming, and edging grass areas.
- Installed flower beds and shrubs to enhance outdoor aesthetics.
- Operated landscaping equipment including mowers and blowers efficiently.
Injection technician
intertec systems
St. Marys, Canada
11.1988 - 04.2011
- Start up and shut down of injection molding equipment, Mold change overs and colour changes during production runs, Removal and installations of end of arm robot Processing, problem solving, preventative maintenance, training of new employees.
- Completed WHMIS, lockout, grounding, bonding, and confined space training to ensure workplace safety.
- Underwent training in SPC, fork truck operation, light and heavy bridge cranes, genie boom lifts, and scissor lifts to improve equipment handling skills.
- Participated in team dynamics and leadership programs to enhance teamwork and drive continuous improvement.
- Operated machines including UBE 1800 ton, UBE 2500 ton, UBE 2800 ton, Mitsubishi 500 ton, and Krauss-Maffei 3000 ton for various production tasks.
- Worked in Saltillo Mexico for 18 months on the start-up of new G.M products Training new team members in safety, processing, troubleshooting, preventative maintenance, machine operation, start ups, shut downs, quality, first offs, last offs, etc...
Education
Basic industrial engineering-theory -
Conestoga College
St. Marys, ONplastics - basic and advanced injection molding
Humber College
Etobicoke, ONSkills
- Warehouse Experience
- Forklift
- Load & Unload
- Materials Handling
- Assembly Line
- Assembly
- Packaging
- Manufacturing
- Factory
- General Labor
- Warehouse Associate
- Machine Operation
- Mechanical Knowledge
- Roofing
- Landscape Maintenance
- Landscaping
- General labor
Certification
Driving Licence
Additional Information
Honest, hardworking, dependable, self-motivated, and a quick learner., Enjoy working both independently or as a team., Able to work all shifts, either rotating or steady., Have work experience on fork lift, overhead cranes, genie booms, scissor lifts, assembly lines, injection molding machines, some basic robotics, and preventative maintenance., Blow molding technician, polyurethane foaming technician, water jet technician., Worked on launch programs in Mexico and Whitby.
Languages
English, Fluent
Highest Level Of Education
Secondary School
Personal Information
Willing To Relocate: Anywhere
Timeline
Labourer
Trojan Technologies
10.2021 - Current
Labourer
Presstran
01.2019 - 09.2019
Labourer
GM Cami
07.2015 - 11.2018
Labourer
Hanwha LLC
12.2014 - 07.2015
Material Handler/coil setter
NASG
08.2014 - 11.2014
Injection molding set up technician
Bayshore plastics
10.2013 - 03.2014
Set up technician
FPE
07.2013 - 10.2013
Landscaper
Sager Total Lawn Care
03.2012 - 08.2013
Labourer
J.B.Trucks
05.2011 - 07.2014
Injection technician
intertec systems
11.1988 - 04.2011
Basic industrial engineering-theory -
Conestoga College
plastics - basic and advanced injection molding
Humber College