Nicole Guilbault
St Albert ,AB
Summary
CWB Welding Inspector Level II & API 1169 Inspector with over 12+ years of expertise in health and safety, pipeline, quality control, civil and mechanical and piping inspection. Learning how to report and assess situations in a timely precise matter. Proficient in NDE activities, scheduling processes, and utilizing tools like Microsoft Office and Bluebeam. Committed to driving innovation in inspection accuracy and efficiency, contributing significantly to project success and safety improvements. Proven to be a valuable member to any project and team.
Overview
3
3
years of professional experience
Work History
Quality Control Inspector
Flint Corporation
09.2024 - Current
- Planning Job Scope
- PSV Management / Coordinator
- Travel Sheets
- MOC Turnover
- Tagging Work Packs in the field
- Bolts up report's
- Flange Inspections
- P&ID Mark ups
Quality Control Lead Inspector
Sundown Oil Field Services
08.2024 - 09.2024
- Executed Field Visual Inspections, Administration, Turnover Construction Completion with client as a single role
- Worked with Pembina Client to meet all Quality standards to the highest level
- Hydro test for risers
- Fabrication
- Over seen All NDE & Coating,Backfill Lowering every aspect's of the pipeline being built
- Final Audits
- Construction Completion
NDE Coordinator
Stuart Olson
04.2024 - 06.2024
- Maintained Records for NDT inspections and results along with associated documentation and test reports
- Ensured compliance with industry standards, safety regulation's and quality assurance requirement's
- Pre populated NDE requests per scope & packs as required
- Sent rejected reports to engineer for either approval or rejection
- Worked extensively with all NDE types - PMI, MT, PAUT,UT,RT, Reports and requests
- Reviewed RT flims & reports
- Overlooked and reviewed all documentation for NDE for turnaround / outage
- Helped with turnover & selling packages
- Walk down's & signed off packs
Quality Control Lead Inspector
Kinetic Energies Ltd
01.2024 - 04.2024
- Executed field visual inspection, administration, turnover construction completion with client for multiple jobs both small inch & big inch pipelines and multi line pipelines as a single role.
- Played roles in the welding inspections, civil inspections, hydro testing and completed all turn over documentation for each project completed
- RFI's
- Ensured compliance with industry standards and regulations by meticulously following established protocols.
- Played a crucial role in maintaining a safe working environment by identifying potential hazards during inspections and recommending corrective actions.
- Maintained a high level of accuracy in documentation, ensuring proper record-keeping for all inspected items.
- Facilitated clear communication between production teams and management regarding quality control matters.
- Communicated with production team members about quality issues.
- Inspected incoming and outgoing materials for accuracy and quality.
- Performed visual inspections and non-destructive tests where appropriate.
- Evaluated components and final products against quality standards and manufacturing specifications.
- Participated in team meetings to discuss progress and results
- Examined products for imperfections and defects.
- Recorded inspection and test results on data sheets.
- Monitored product quality at all stages of production process.
- Updated quality control records and reports.
- Provided feedback to production team regarding product quality.
Piping & Mechanical Inspector
Stuart Olson
09.2023 - 11.2023
- Work with our quality team to ensure timely safe and accurate execution of outage and shutdown work scopes.
- Visual inspection on piping, supports, structural and equipment welds
- Submitting NDE requests per ITP.
- Visual inspection of Bolt ups, verifying nuts bolts flanges and gaskets, per ISO Drawing and line class and spec.
- Outage Client walkdowns
- Hot Torques
- In service leak inspections •
- Redlining, working progressively with Blue Beam
- Finalize review and submit turnover documentation daily.
- Recording of heat numbers and weld locations
- Reading blueprints, QA Approved torque sheets, ISO, P&ID’s ITPS
Welding, General, Integrity Dig Inspector
SA Energy
05.2023 - 10.2023
- Project turnover, organized, reviewed, finalized turn over paperwork at the completion of the job
- Final Punches on all Block valves for spreads 3/4
- Final Tie Ins
- Ovality Digs-measurements, reports, oversee excavation and backfill
- General inspection on Excavation Lowering backfill, ditch plugs and clean up and HDD bores
- Oversee and visual inspections of Tie in welds, Steep slope welds Poor Boy Welds Final Tie Ins Mainline Welding and Repair welds
- Bevel Checks, Parameters, Weld mapping, Weld logs
- Material Receiving
- Daily Inspection Reports
- Oversee inspection reports on brown lining on HDD Bores
- Counter bore inspections
- Compaction Testing Reports for MLBVS
Quality Control Welding Inspector
Macro Industries
03.2023 - 08.2023
- Responsible for preparing, managing, and completing quality control documentation and reports as required. Tasks included reading drawings, tracking welds, repairs, tie ins, completed welds, and any other specific requirements based on project inspection and test reports.
- Material receiving entering Materials received into material log.
- Properly assigning MMRS/MTRS
- Visually inspecting completed welds
- Completed reports and visuals for FT/PB/TI/TW/FW/TH
- Receiving production pipe and security pipe from supplier, doing visual check on coating and pipe, verifying heat numbers and pipe numbers.
- Verifying Transitions/Transition Reports
- Checking Hi-Lo/Bevels.
- Taking parameters/parameter reports
- Daily Observation/surveillance reports
- General Inspection Reports
- Repair Welding Reports
- Working with MCAW/FCAW/SMAW Welding
Quality Control Inspector
Robert B Somerville / ArcaniteTechnology Drive NDE
12.2022 - 02.2023
- Visual examination for risers
- Reading blue prints
- Visual examination for structural welds.
- Visually examination for all production completed welds.
- Redlining
- MMR’s
- Checking welder qualifications
- Checking Hi-Lo, bevel preps weld faces & gaps.
- Taking parameters.
- Checking up-to-date calibrations for welding machines
- WQT’s/FW/PB/FT’s
- Testing welders/ Qualifying welders
- visual reports, parameter reports
- TransCanada documentation and reports.
Quality Control Inspector
MSJV/ Spiecapag Coastal Gas Link
09.2022 - 12.2022
- Responsible for preparing, managing, and completing quality control documentation and reports as required. Tasks included reading drawings, tracking welds, repairs, tie ins, completed welds, and any other specific requirements based on project inspection and test reports.
- Visually inspecting completed welds
- Checking Hi-Lo, bevels pre heat, weld face & weld gaps
- Working with weld logs.
- Taking parameters.
- Working with RMD, MCAW/ FCAW, AUTO BUGS/ STICK/ BOHLER ROD.
- Steep slope welding.
- Checking up-to-date calibrations for welding machines.
- Inspecting lowering in and back fill.
- Completing lowering in and back fill reports.
- Ovality Checks
Quality Control Inspector / Welder Apprentice
PAPC Bonatti
05.2022 - 09.2022
- Testing welders in yard
- RMD welding process & testing
- Checking up-to-date calibrations for welding machines.
- Providing pictures and reports for electrode traceability, fit up check, pre heat temperature, rod oven heat, and traceability checks.
- Inspection of materials to be welded.
- Cleaning up work areas after the weld is complete, such as slag, rust, and grease using brushes or grinders.
- Cutting with band and crawler
- Connecting hoses from hand torch to oxygen and fuel gas cylinders.
- Tie ins and mainline and steep slopes
- Primarily working with Journeyman Welder on various welding jobs
- Following welders' instructions to adjust welding machine temperatures.
- Using buffers and grinders to clean welds & bevel pipe
Straw Boss
PAPC Bonatti / Coastal Gas Link
05.2021 - 05.2022
- Assisting the Foreman in the planning and execution of work
- Expediting work per schedule demands. Making sure tools, equipment and materials are available for work fronts
- Assisted in clean up, ROW, and project running smoothly for foreman.
- Suppling crews with material as needed, weld blankets, welding rod
- Pre heating joints between welding passes with shacks during crew breaks
- Completed necessary paperwork for foreman and job specific tasks FLHA/JSA/Ditch entry forms confined space
Education
API 1169
Welding Inspector Level II
CWB Group
Welding Apprenticeship
Local 488
Welding Technician Trainee
RMS
Health Safety Administrator
ACSA
Leadership of Excellence
ACSA
Basic Instructional Techniques
ACSA
Construction Safety Administration
ACSA
Skills
- Welding Inspection
- Quality Control
- Pipeline Safety
- Bluebeam
- NDE Activities
- Reliability
- Leadership
- Documentation
- Communication
- Teamwork
- Final Turnover
- Quality Assurance
- Project Coordination
- Relationship Building
- MS Office
- Discretion and Confidentiality
- Document Control
Timeline
Quality Control Inspector
Flint Corporation
09.2024 - Current
Quality Control Lead Inspector
Sundown Oil Field Services
08.2024 - 09.2024
NDE Coordinator
Stuart Olson
04.2024 - 06.2024
Quality Control Lead Inspector
Kinetic Energies Ltd
01.2024 - 04.2024
Piping & Mechanical Inspector
Stuart Olson
09.2023 - 11.2023
Welding, General, Integrity Dig Inspector
SA Energy
05.2023 - 10.2023
Quality Control Welding Inspector
Macro Industries
03.2023 - 08.2023
Quality Control Inspector
Robert B Somerville / ArcaniteTechnology Drive NDE
12.2022 - 02.2023
Quality Control Inspector
MSJV/ Spiecapag Coastal Gas Link
09.2022 - 12.2022
Quality Control Inspector / Welder Apprentice
PAPC Bonatti
05.2022 - 09.2022
Straw Boss
PAPC Bonatti / Coastal Gas Link
05.2021 - 05.2022
API 1169
Welding Inspector Level II
CWB Group
Welding Apprenticeship
Local 488
Welding Technician Trainee
RMS
Health Safety Administrator
ACSA
Leadership of Excellence
ACSA
Basic Instructional Techniques
ACSA
Construction Safety Administration
ACSA
Similar Profiles
Tammy BiccumTammy Biccum
Heavy Equipment Operator at Flint CorporationHeavy Equipment Operator at Flint Corporation
Vishrut PatelVishrut Patel
Journeyman Electrician at Flint CorporationJourneyman Electrician at Flint Corporation
Ryan PayneRyan Payne
Lead Launch Electrical Coordinator at General Motors Corporation – Flint AssemblyLead Launch Electrical Coordinator at General Motors Corporation – Flint Assembly
Xander NansonXander Nanson
Delivery Driver at Funky PetalsDelivery Driver at Funky Petals
Patria AndersonPatria Anderson
Customer Experience Lead at ScotiabankCustomer Experience Lead at Scotiabank