Naeem Shah Badshah
Calgary,Alberta
Summary
- EASA basic exams modules passed as B1.1 and B2
- Experienced as an Aircraft Engineer B1 CRS for A340 and B767
- Experienced in Engine CFM 56 5C4 and JT9D
- Experienced as an Aircraft Technician/Mechanic A340-300,A320 fam. And B767
- Knowledgeable on Aircraft Manufacturer Safety and Security procedures
- Proven Analytical and Technical Skills
- Very good knowledge of AIR NAV
Overview
10
10
years of professional experience
1
1
Certification
Work History
Aircraft Engineer
Dedalus / Legend Airlines
03.2021 - 10.2023
- Technical rep for C checks on A340-300 on 8 different MSN
- Technical rep for 12 years heavy D check on A340-300 on 6 different MSN
- LOPA change from passenger to cargo AC
- LOPA change from mix configuration to full economy configuration
- De Registration and Re registration of different AC
- Delivery of A340-300 to SURINAM airways for a wet lease
- Re Delivery of aircrafts from Air hub airlines A340-300
- Landing gear replacement on different A340-300.
Aircraft Engineer B1 CRS for A340 and B767
Kam Air International Airline
09.2017 - 03.2021
- Carry out maintenance on Kam Air aircrafts up to A checks and unscheduled inputs up to or exceeding ACAA standards
- Read and interpret pilots' descriptions of problems to diagnose causes
- Regularly monitor the aircraft defect status sheet and ensures defects are cleared during maintenance without causing operation delay while adhering to the required standard
- Carry out routine and non-routine task cards
- Utilize the Technicians effectively and professionally without violating safety and quality standards
- Update the Maintenance Manager of any issues arises which can be of a concern or could result in operational disruption or involve a drop in acceptable service standards
- Carry out technical projects / tasks as directed by the Maintenance Manager
- Remove or install aircraft engines, CFM56
- Go to out station to fix a AOG aircraft.
Aircraft Technician and Flight Engineer
Safi International Airline
07.2016 - 08.2017
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems
- Conduct routine non routine and special inspections as required by regulations
- Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components
- Obtain fuel and oil samples and check them for contamination
- Clean, refuel, and change oil in line service aircraft
- Remove or install aircraft engines, JT9D AND CFM56
- Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts
- Go to out station to fix a AOG aircraft.
Aircraft Manufacturing Technician
Genesis Aircraft Development
03.2014 - 06.2015
- Manufacture medium weight aircraft six seater with pusher propeller for pilot training, tourism and ambulance services
- Manufacturing aircraft part from carbon fiber, composites, fiber glass, sheet metals and modern aircraft materials
- Major aircraft structural work (i.e
- Assembling and riveting the ribs and structural reenforcements)
- Assembling aircraft linkages (i.e
- Elevator controls, aileron controls, and mixing unit of linkages)
- Examining the structure of an aircraft to determine the location, nature, and extent of any defects or damage and perform any repairs.
Education
EASA Part 66 B1.1 -
Mid East Aviation Academy
National Diploma -
Emirates Aviation College
01.2011
Skills
- Decision Making Capabilities
- Failure Modes and Effects Analysis
- Technical Documentation Abilities
- Root Cause Analysis Techniques
- Problem Solving Aptitude
- Time Management Proficiency
- Team Leadership Abilities
Certification
- DGR
- Aviation Regulation
- Dangerous Good Awareness
- EWIS
- Human Factor
- Safety Management System
References
- Eng. Mustafa Assadi, Chief Technical Officer, +90 501 346 50 67, assadi@v2aviation.com, https://www.v2aviation.com
- Eng. Marouf Baheder, Director of Maintenance, +93 730 11 27 62, mnt.director@kamair.com, https://www.kamair.com
- Eng. Cristian Cordanus, Director of Maintenance, +40 740 035 467, maintenance@timaerospace.ro, https://www.timeaerospace.ro
Languages
English
Full Professional
Persian
Native or Bilingual
Pashto
Native or Bilingual
Timeline
Aircraft Engineer
Dedalus / Legend Airlines
03.2021 - 10.2023
Aircraft Engineer B1 CRS for A340 and B767
Kam Air International Airline
09.2017 - 03.2021
Aircraft Technician and Flight Engineer
Safi International Airline
07.2016 - 08.2017
Aircraft Manufacturing Technician
Genesis Aircraft Development
03.2014 - 06.2015
EASA Part 66 B1.1 -
Mid East Aviation Academy
National Diploma -
Emirates Aviation College
Similar Profiles
Charles GaetaCharles Gaeta
Director of Private Client Sales & Market Cultivat at Dedalus WineDirector of Private Client Sales & Market Cultivat at Dedalus Wine
Florine BLOQUELFlorine BLOQUEL
Business Unit Business Manager CIS at DedalusBusiness Unit Business Manager CIS at Dedalus
Giulio ConteGiulio Conte
On site client assistent at Dedalus Italia SpaOn site client assistent at Dedalus Italia Spa
Deidre MyersDeidre Myers
MANAGING DIRECTOR at Alberta Holdings LtdMANAGING DIRECTOR at Alberta Holdings Ltd
Nadine ParkNadine Park
Volunteer Event Helper at The Association of Korean-Canadian Scientists and EngineersVolunteer Event Helper at The Association of Korean-Canadian Scientists and Engineers