Muhsen Hash
Seaspan
Surrey,Canada
1
Certification
Dedicated painter and blaster with a strong work ethic and attention to detail, honed at Seaspan. Expert in industrial painting and blasting, ensuring high-quality finishes and adherence to safety protocols. Proven ability to mix paints and solve problems effectively, contributing to successful project outcomes and team success.
Work History
Painter / Blaster
- Prepared ship hulls, tanks, and decks for coating application.
- Operated blasting equipment and handled various abrasives depending on surface requirements.
- Mixed and applied coatings using brush, roller, and spray methods.
- Followed safety protocols for confined space and working at heights.
- Maintained work areas in compliance with environmental and safety regulations.
- Performed abrasive blasting to prepare steel surfaces for coating application according to project specifications.
- Applied primer, intermediate, and finish coats using airless and conventional spray equipment.
- Conducted touch-up and repair work in confined spaces and at heights following strict safety standards.
- Ensured correct DFT (Dry Film Thickness) and adhesion quality in coordination with QC inspectors.
- Maintained equipment, tools, and PPE in proper working condition.
- Assisted in training new painters and blasters on safety and coating procedures.
Lead Painter
- Prepare surfaces by cleaning, sandblasting and priming.
- Operate sandblasting equipment to remove rust, paint and other materials from surfaces.
- Mixing paints, solvents, and other coatings according to specific formulas and application guidelines.
- Apply multiple coats as necessary, ensuring even coverage and proper drying times.
- Inspect surfaces after painting to ensure quality and uniformity, making necessary touch-ups and repairs.
- Remove grease, dirt, paint or rust in preparation for paint applications, using abrasives, solvents, or sandblasters.
- Pour paint into spray guns and adjust nozzles and paint mixes for proper paint flow and coating thickness.
- Maintain and clean painting equipment regularly to ensure optimal performance.
- Follow all safety protocols and guidelines to prevent accidents and injuries.
- Dispose of hazardous materials and waste according to regulations.
- Keep accurate record of work performed, materials used, and time spent on tasks.
- Report any equipment malfunctions or safety concerns to the supervisor immediately.
Coater
- Prepare the area for sandblasting with proper signage.
- Sandblasting with green gold.
- Select and install sandblasting attachments.
- Operate controls on sandblasting tools and machinery.
- Inspect finished surfaces for smoothness, defects and quality.
- Remove dirt, paint, grease and other built-up material from surface.
- Application of paint using brush and roller.
- Coating application using SPC 2888.
- Field joint coating of 48 inch pipe.
- Jeep repairs using the part paint and the gun.
- Jeep detection at 2500 volts.
- Using induction pads to heat small repair area and heat cure afterwards.
- Prepare parts of coating and followed all procedures regarding powder coating application.
- Observed safety protocols set by the company to avoid hazardous conditions.
- Verify production workflow, quality parts and delivery met required time-frames.
- Identified issues with paint viscosity and flow before projects were negatively affected.
- Inspected completed work for adherence to very strict guidelines and highest quality standards.
- Provided a supervisor with a daily status report on all job tasks and workers duties.
- Removed surface imperfections, applied special undercoats and sealed seams to ready surfaces for paint application.
- Executed work orders for the painting team as part of a larger project schedule.
Coater
- Field joint coating application.
- Application of SPC 2888.
- Was responsible for running the spray machine under the supervision of the forman.
- Conducted jeeper calibration.
- Holiday detection at 2500 volts.
- Using induction pads to heat and cure the paint.
- Coating application using Brush and Roller.
- Prepared parts of coating and followed all procedures regarding.
- Observed safety protocols set by the company to avoid hazardous conditions.
- Verify production workflow, quality parts and delivery met required time-frames.
- Identified issues with paint viscosity and flow before projects were negatively affected.
- Inspected completed work for adherence to very strict guidelines and highest quality standards.
- Provided a supervisor with a daily status report on all job tasks and workers duties.
- Removed surface imperfections, applied special undercoats and sealed seams to ready surfaces for paint application.
- Executed work orders for the painting team as part of a larger project schedule.
Skilled Labourer
- Perform grinding and cutting.
- Grade and level trench bases.
- Assist and carry out and lay off feeder pipes.
- Doing general clean up and housekeeping.
- Performed grinding, measurement, fabrication, assembling, rigging.
- Helped in fuelling and cleaning up company trucks.
- Working inside the Tank.
- Maintained tools and equipment used in fitting pipe systems.
- Operates hand tools to assemble or disassemble equipment; Responsible for the safety of self and others.
Skilled Concrete Labourer
- Erected and dismantled concrete form and scaffolding.
- Dewatering the construction site with pumps and hoses.
- Dug trenches and levelled earth to find grade specifications.
- Removed rubble and other debris at the construction site.
- Put up fencing and barricades where needed.
- Removed snow from walkways using the shovels.
- Operated jackhammer and drills to break up concrete.
- Levelling earth to fine grades.
Industrial Painter
- Prepared various surfaces for painting by washing, scraping, burning, sanding and sandblasting.
- Mixes, matches, and blends various paints, enamels, lacquers, varnish, stains and special protective coatings to achieve the desired color, consistency and drying properties.
- Coating application using Brush and Roller.
- Prepared parts of coating and followed all procedures regarding.
- Observed safety protocols set by the company to avoid hazardous conditions.
- Paints using brush, roller, spray gun or another applicator.
- Prepared walls and hangs paper and other wall covering material.
- Performed minor drywall repairs and painting.
- Ability to determine and clearly identify proper materials and material quantities for new and existing projects.
- Clean, degrease and primer both component parts and finished products.
- Self-motivated, with a strong sense of personal responsibility.
- Proven the ability to learn quickly and adapt to new situations.
- Worked well in a team setting, providing support and guidance.
- Managed time efficiently in order to complete all tasks within deadlines.
- Demonstrated respect, friendliness and willingness to help whenever needed.
- Excellent communication skills, both verbal and written.
- Passionate about learning and committed to continual improvement.
- Strengthened communication skills through regular interactions with others.
- Organized and detail-oriented with a strong work ethic.
Education
High School Diploma
Skills
Industrial painting & blasting
Attention to detail
Team player
Spray painting
Strong work ethic
Problem-solving
Paint mixing
Certification
- Standard First Aid
- CSTS-20
- Confined Space
- H2S-Alive
- MEWP
- Fire Safety and Extinguishers
- Rigging ticket
- Fatigue Management
- CSO
- WHMIS2015
- Fall Protection
- Ground Disturbance Level 2
- PCST
- Bear Awareness
- NACE Level 1
Timeline
High School Diploma
Read More
Industrial Painter
PCL Construction (Agrium Vault)
Read More
Skilled Concrete Labourer
Shawcor Plant-54
Read More
Skilled Labourer
BFI (LNG Tank)
Read More
Coater
Pacific Atlantic Pipeline Company
Read More
Coater
Michels Canada
Read More
Lead Painter
Park Derochie
Read More
Painter / Blaster
Seaspan
Read More