Mohammed Sabr Omar
St. John's,NL
Summary
Mechanical Engineering professional with a decade of experience in operation, Condition monitoring, and assisting in maintaining thermal power plant equipment, such as frame 6B and 9E gas turbines, TM 2500 generation 8+ turbines, steam turbines, heat recovery steam generators, LPG vaporization, etc. Strong expertise in writing operation reports and training documents to maximize human efficiency and equipment availability.
Overview
15
15
years of professional experience
1
1
Certification
Work History
MECHANICAL OPERATION TECHNICIAN
Early Power Limited (BRIDGE POWER PROJECTS)
07.2019 - 08.2023
- Carried out Start-up and shutdown of TM2500 G8+
- Carried out compressor offline water wash
- Carried out puff filter (compressor inlet filter) cleaning.
- Carried out Start-up and shutdown of LPG vaporizer plant
- Wrote and revised operations and emergency response procedures
- Inspected equipment during normal operations and shutdowns to identify defects and malfunctions.
- Analyzed reported issues by observing equipment operations and acquired data to diagnose reported issues
- Daily and monthly energy data acquisition and records,
- Prepared daily reports and logs,
- Communicated with the System Control Center.
ASSISTANT OPERATION ENGINEER (Unit Supervisor)
Sunon Asogli Power
02.2014 - 07.2019
- Carried out Frame 6B Gas turbine operations, including normal start-up, shutdown, and emergencies.
- Carried out Heat Recovery Steam Generator (HRSG) operations, including cold, warm, and hot states, Steam turbine operations, including normal start-up and shutdown in cold, warm, and hot states,
- Operated Balance of Plant (BOP), including WWTP, WTP, and Central Air Conditioning System
- Periodic switching of running equipment.
- Carried out permit-to-work isolations, including hot work permits, work-and-test, and confined space.
- Performed offline water wash
- Wrote and revised incident reports and operational analysis, suggesting solutions to prevent possible occurrences.
- Trained new employees on the skills required during inspections and the operations of Gas turbines, steam turbines, HRSG, and other auxiliary equipment,
- Wrote and revised training documents and operational procedures.
ASSISTANT ENGINEER
Juaben Oil Mills Limited
02.2013 - 09.2013
- Created detailed reports on engineering activities and findings.
- Contributed to successful project completion by assisting with on-site inspections, testing, and quality control measures.
- Assisted in developing cost-effective solutions to engineering problems.
- Supervised and assisted in maintenance work on refinery equipment.
- Adherence to safety rules.
Trainee Mechanical Engineer
AngloGold Ashanti Aduapriem Limited
09.2012 - 12.2012
- Inspected mining equipment (Semi Auto Genius (SAG) Mills, belt conveyors, and Air compressors)
- Assisted in maintenance of pumps, valves
- Troubleshot minor issues with P&ID and F&ID, escalating more serious problems to supervisor.
Trainee Mechanical Engineer
Volta River Authority Akosombo
06.2012 - 08.2012
- Assisted technicians in inspecting and maintaining splitter vane, generator thrust bearings, centrifugal pumps, air compressors, generator surface air, thrust bearing coolers, intake gates, and draft tube gates.
- Established lasting relationships with peers, and customers using strong communication and interpersonal skills.
National Service Personnel
Manfo English and Arabic School
10.2010 - 08.2011
- Worked with staff members and teachers to design comprehensive and individualized plans to optimize student education.
- Participated in department meetings to provide input to colleagues about student achievement and improvement.
- Incorporated exciting and engaging activities to achieve student participation and hands-on learning.
- Prepared quizzes, tests and examinations to gauge how well students were learning.
- Communicated frequently with parents, students, and faculty to provide feedback and discuss instructional strategies.
- Coached the school football team to their first inter-zone games. (the team finished 3rd)
Industrial Attachment Trainee
Intravenous Infusions Limited
06.2008 - 09.2008
- Monitored air compressors (screws), steam boilers (fire tube), softener water treatment plant (duplex), Ample filling machines, pumps, pipes, and valves to identify issues and report them to the maintenance engineer.
- Established lasting relationships with peers, leaders, and customers using strong communication and interpersonal skills.
- Daily mixing of Residual Fuel Oil and diesel for boilers,
Skills
- MS Office
- Appointment Scheduling
- Report Preparation
- Power Tools and Equipment
- Computer-assisted diagnostics
- Safety Management
- Documentation And Reporting
- Condition Monitoring
- Performance Improvement
- Attention to Detail
- Multitasking and Organization
- Written/Verbal Communication
- Troubleshooting
- Preventive Maintenance
- Team Training
Qualification And Certificate Summary
- BSc. Mechanical Engineering (First Class honours) - Kwame Nkrumah University Of Science And Technology - 07/2011 - 06/2013
- HND Mechanical Engineering (Second Class Upper) - Kumasi Polytechnic - 07/2007 - 06/2010
- TM2500 PACKAGE FAMILIARIZATION & OPERATIONS TRAINING COURSE ISSUED By GE POWER SERVICES TECHNICAL TRAINING, from 08/13/2019 - 08/17/2019
- TM2500 PACKAGE MAINTENANCE TRAINING COURSE CERTIFICATE ISSUED By GE POWER SERVICES TECHNICAL TRAINING, from 09/02/2019 - 09/06/2019
- FUNDAMENTAL TRAINING FOR OPERATORS CERTIFICATE ISSUED By GRIDCo, from 09/30/2019 - 10/18/2019
References
- JOEL ASAMOAH-DUAH, OPERATIONS MANAGER, TWIN CITY POWER LIMITED (PE POWER), +233 (0) 245156275, asamoahkwakuduah@gmail.com
- FRANCIS KOJO MENSAH, SHIFT TEAM LEAD, EARLY POWER OPERATIONS LIMITED(EPLPOL), 0208747409, 0243313051
- OBED OWIREDU BOTCHWAY, SHIFT TEAM LEAD, CENPOWER GHANA LIMITED, 0249419653, oowiredu@cenpowergen.com
Languages
English
Full Professional
Arabic
Limited Working
Certification
- First Aid/CPR Certified
- TM2500 package familiarization & operations training course issued by ge power services technical training.
- TM2500 package maintenance training course certificate issued by ge power services technical training
- Fundamental training for operators certificate issued by Ghana Grid Company Limited, (GRIDco).
Timeline
MECHANICAL OPERATION TECHNICIAN
Early Power Limited (BRIDGE POWER PROJECTS)
07.2019 - 08.2023
ASSISTANT OPERATION ENGINEER (Unit Supervisor)
Sunon Asogli Power
02.2014 - 07.2019
ASSISTANT ENGINEER
Juaben Oil Mills Limited
02.2013 - 09.2013
Trainee Mechanical Engineer
AngloGold Ashanti Aduapriem Limited
09.2012 - 12.2012
Trainee Mechanical Engineer
Volta River Authority Akosombo
06.2012 - 08.2012
National Service Personnel
Manfo English and Arabic School
10.2010 - 08.2011
Industrial Attachment Trainee
Intravenous Infusions Limited
06.2008 - 09.2008
- First Aid/CPR Certified
- TM2500 package familiarization & operations training course issued by ge power services technical training.
- TM2500 package maintenance training course certificate issued by ge power services technical training
- Fundamental training for operators certificate issued by Ghana Grid Company Limited, (GRIDco).
Similar Profiles
Kavitha NagarethinamKavitha Nagarethinam
Software Programmer at Enmas GB Power Systems Projects LimitedSoftware Programmer at Enmas GB Power Systems Projects Limited
Ravindra Babu MRavindra Babu M
Batching Plant Engineer & P&M Incharge at Power Mech Projects LimitedBatching Plant Engineer & P&M Incharge at Power Mech Projects Limited
Sakthi K PSakthi K P
Senior Engineer at POWER MECH PROJECT LIMITED ,IL&FS TAMILNADU POWER COMPANY LIMITEDSenior Engineer at POWER MECH PROJECT LIMITED ,IL&FS TAMILNADU POWER COMPANY LIMITED