Mohamed Mahmoud
Calgary
Summary
Highly accomplished P.Eng. licensed in Alberta and Saskatchewan with 10+ years of experience delivering structural designs across diverse projects. Proven ability to lead and manage complex projects (concrete, steel) while ensuring adherence to building codes and exceeding client expectations.
Overview
12
12
years of professional experience
Work History
Senior Structural Engineer
Enhanced Engineering (E2) Consulting Ltd.
06.2021 - Current
- Provided preliminary (±40, ±10) and detailed design for concrete and steel structures included but not limited to pipe supports, pipe racks, pump foundations, concrete underground structures, concrete and steel piles, helical screw piles, slab on grades, grade beams, platforms, composite decks, underground sumps/tanks, telecommunication mounts, masonry structures.
- Used various codes and specifications including but not limited to NBC, NBC(AE), A23.3, A23.1/A23.2-14, CSA A23.4, CSA S16, CSA W47.1, CSA W59, CSA S806, AWS A2.4.
- Reviewed concrete mix design and steel MTRs.
- Specified NDE testing and prime and paint requirements for structural steel.
- Reviewed and signed contractors Inspection and Test Plan (ITP) before and during construction.
- Reviewed turnover packages post construction and conducted walkdown reviews at 100% completion of projects.
- Reviewed geotechnical reports.
- Utilized various software to develop accurate analysis and design including not limited to: S-Frame, S-Concrete, S-Steel, S-Foundation, Idea Statica, Tekla Tedds, ETABS, SAP 2000.
- Analyzed existing structures against blast loads.
- Reanalyzed existing structures for upgrades.
- Considered safety acts and regulations of Alberta and Saskatchewan.
- Prepared and provided the following deliverables to clients: Design basis memorandums (DBM), Scope of works, Issued for approval packages (IFA), Issued for construction packages (IFC), Engineering technical reports, As-built packages.
- Prepared request for proposals packages (RFP) for contractors.
- Attended daily construction meeting during construction phases of projects.
- Conducted construction inspections and reviewed contractors work.
- Reviewed and approved shop drawings for steel and concrete projects.
- Contacted contractors for quotations.
- Attended meetings and discussed project details with Clients.
- Coordinated with other disciplines.
- Conducted site assessments and inspections for new and existing structures and determined corrective actions.
- Reviewed Drawings, and calculations prepared by junior engineers.
- Mentored and assisted Junior engineers.
- Completed professional training courses to maintain current knowledge.
Intermediate Structural Engineer
QEA Tech.
04.2020 - 06.2021
- Designed structural steel members.
- Made accurate calculations using S-Frame software.
- Attended meetings with clients.
- Utilized National Energy Code of Canada to calculate the effective thermal resistance of building assemblies for pre-engineered buildings.
- Used AutoCAD on a daily basis.
- Coordinated with building envelope consultants.
- Reviewed as-build packages.
- Conducted site visits.
- Reviewed drawings.
Structural Engineer
Roehampton Communications Ltd.
01.2019 - 05.2020
- Designed rooftop supporting structures including roof penetration mounts, ballast mounts, wall mounts, and cabinet chairs/platforms, etc.
- Designed welded and bolted connections.
- Used AutoCAD to provide details.
- Re-analyzed existing structural steel telecommunication towers.
- Performed site inspections in Manitoba and Saskatchewan and assessed building roofs to mount new structures.
- Climbed and inspected various types of towers.
- Field-determined Guy Wires tension forces.
- Utilized Total Station Unit to check tower alignment.
- Prepared inspection reports.
- Attended meetings with Clients.
Junior Structural Engineer
Engineering Consulting Group (ECG)
11.2013 - 05.2016
- Performed complete structural analysis and design for concrete commercial and residential buildings including but not limited to slabs, beams, columns, and shear walls using ACI codes.
- Designed underground concrete vaults and water tanks.
- Designed retaining walls.
- Designed steel trusses and frames.
- Performs foundation design based on geotechnical report recommendation.
- Designed for Seismic loads, and wind loads.
- Developed accurate finite element analysis models of multi-storey buildings utilizing ETABS, SAP 2000, SAFE software.
- Conducted construction monitoring and field inspections during the construction phase of projects
- Used AutoCAD to develop design drawings.
- Reviewed shop drawings.
- Coordinate with other disciplines for structural design inputs.
Junior Structural Engineer
Arabian International Company (AIC)
07.2012 - 11.2013
- Analyzed and designed pipe racks.
- Created finite element models.
- Designed frames using Sap 2000.
- Designed bolted and welded connections based on AISC standards.
- Developed calculation sheets using Excel.
- Created Engineering sketches for designers/drafters to prepare and issue design drawings.
- Attended meetings and discussed project details with clients.
- Helped in establishing and setup internal engineering and design standards and specifications.
- Calculated bill of materials.
- Coordinated with other disciplines.
Education
Master Of Science - Durability of Concrete Structures
University of Manitoba
Winnipeg, MB10.2018
Bachelor - Civil Engineering
Asyut University
Egypt07.2012
Skills
- Manage multiple projects simultaneously while maintaining high quality of service delivery within budget constraints
- Cost Estimate for engineering manhours and construction cost for preliminary and detailed phases of projects
- Design of steel and concrete structures
- Advanced skills with assessment of durability of concrete structures with Master of Science degree in this field
- Strong skills in structural analysis software
- Plenty of field reviews and site Inspections
- Mentoring junior engineers
Languages
English
Full Professional
Affiliations
- Association of Professional Engineers and Geoscientists of Alberta
- The Association of Professional Engineers and Geoscientists of Saskatchewan
PUBLICATIONS
- Performance of Concrete with Alkali-Activated Materials and Nanosilica in Acidic Environment.
- publication date: 2019, publisher: Journal of Structural Engineering (ASCE)
- Response of Concrete to Incremental Aggression of Sulfuric Acid publication date: 2018, publisher: Journal of Testing and Evaluation (ASTM)
- Response of Concrete to Incremental Levels of Sulfuric Acid Attack publication date: 2017, publisher: 6th International Conference on Engineering Mechanics and Materials, Canadian society for civil engineering, Vancouver, British Columbia, Canada
COURSES
- Building Energy Modeling and Sustainable Design University of Manitoba - Winnipeg, Manitoba, Canada Fall 2016
- Building Codes and Fire Protective Design University of Manitoba - Winnipeg, Manitoba, Canada Fall 2016
- Durability of Concrete University of Manitoba - Winnipeg, Manitoba, Canada Winter 2017
- Prestressed Concrete University of Manitoba - Winnipeg, Manitoba, Canada Winter 2017
- Structural Health Monitoring University of Manitoba - Winnipeg, Manitoba, Canada Fall 2017
- Advanced Concrete Technology University of Manitoba - Winnipeg, Manitoba, Canada Fall 2017
- Building enclosure Design University of Ottawa (online)- Winter 2021
- Building Energy Management and Optimization University of Ottawa (online)- Winter 2021
Timeline
Senior Structural Engineer
Enhanced Engineering (E2) Consulting Ltd.
06.2021 - Current
Intermediate Structural Engineer
QEA Tech.
04.2020 - 06.2021
Structural Engineer
Roehampton Communications Ltd.
01.2019 - 05.2020
Junior Structural Engineer
Engineering Consulting Group (ECG)
11.2013 - 05.2016
Junior Structural Engineer
Arabian International Company (AIC)
07.2012 - 11.2013
Master Of Science - Durability of Concrete Structures
University of Manitoba
Bachelor - Civil Engineering
Asyut University
Similar Profiles
Joshua WalleyJoshua Walley
Laborer at E2Laborer at E2
Zachary WaldripZachary Waldrip
Volunteer at E2Volunteer at E2
Matthew CrinerMatthew Criner
Chief Inspector at E2 EngineeringChief Inspector at E2 Engineering