Summary
Overview
Work History
Education
Skills
References
Certification
Timeline
Generic

Miguel Levesque

Québec,QC

Summary

Red Seal Electrician with control, instrumentation, automation, programming and industrial experience. Most of my experience has been done doing either commercial or industrial construction, maintenance and programming. Eager to learn new stuff and apply existing knowledge with skill and efficiency. I enjoy doing all aspects of the trade, my strong point is instrumentation/controls but definitely not scared of getting my hands dirty and doing any kind of physical work in any weather condition.

Overview

7
7
years of professional experience
1
1
Certification

Work History

Industrial Electrician

IAMGOLD Côté Gold Mine
Gogama, Ontario
03.2024 - Current
  • Shift Electrician duty
  • 14/14 FIFO
  • Maintenance of 13.8kV substation
  • Splice/repair 7.2kV trailing cable
  • Troubleshooting Cat 6060 electric shovel
  • Working with Schneider PLC, VFD, MCC and TesysT
  • Install and maintain electrical equipment
  • Perform preventive maintenance and keep records
  • Use of Oracle maintenance software

Instrumentation Electrician

Canadian Royalties
Nunavik, Northwest Territories
03.2024 - 05.2024
  • 21/21 FIFO
  • Calibration of gas detectors, valves and pH probes
  • Troubleshooting electrical and instruments
  • Provide fast and reliable electrical & instrumentation support during downtime
  • Coordination with control room and on-site programmer

Industrial Electrician

MP Solutions Inc.
Greenstone Gold Mines, ON
12.2023 - 03.2024
  • HVAC controls terminations
  • Install and terminate sensors, instruments and control components
  • 14/7 and 21/7 FIFO
  • Working with Reliable Controls BMS
  • Start up/commissioning
  • Build supports for and install control panels

Instrumentation Electrician

Stornoway Diamonds
Renard Mine, Quebec
05.2022 - 11.2023
  • Calibration and troubleshooting of 4-20mA valves, pressure cells, conveyor belt scales(nuclear and cells), level sensors, turbidimeters
  • 14/14 FIFO
  • Pneumatic valves troubleshooting and installs
  • Working with Schneider PLC, VFD and MCC, TesysT
  • Working with ABB VFD
  • Responding to emergency calls and providing onsite support
  • Troubleshooting with the help of PLC programs, SCADA and trends
  • Calibration and maintenance of DeBeers and Tomra diamond sorting machines
  • 4160v/600v switchgear/mcc maintenance
  • Processing plant and natural gas power plant experience
  • Maintenance of Caterpillar 2mW 4160v gensets
  • Installing ladder type cable tray and supports
  • Performing diagnostics and root cause analysis to evaluate malfunctions and repair as efficiently as possible
  • Utilizing knowledge of mathematics to scale and calibrate process instrumentation
  • Installing, programming and adjusting electrical equipment
  • Maintaining system logs or manuals to document testing or operation of equipment
  • Read and interpreted technical manuals, drawings and schematics to make accurate repair decisions
  • Performing preventive and corrective maintenance to keep machinery running at optimal levels
  • Building and setting up control panels
  • Testing electrical systems to locate loose connections or other faults and make proactive repairs
  • Thermography inspections and reports
  • Utilizing maintenance program(GuideTI)

Industrial Electrician

Industries GDS
Pointe-à-la-Croix, Quebec
04.2021 - 05.2022
  • Troubleshooting of electrical and network issues to get production running again as quickly as possible
  • Working with Allen Bradley PLC, Studio 500&5000 and Factory Talk View
  • Optimizing of process
  • Responding to emergency calls and providing onsite support
  • Troubleshooting and installing pneumatics valves
  • Troubleshooting with the help of PLC programs and trends
  • Building ladder logic programs and set up/program HMI's
  • Reviewing blueprints and schematics to determine electrical component and wiring locations
  • Determine and provide preliminary cost estimates for materials and services
  • Troubleshooting and diagnosis on malfunctioning systems or components like servo and fully automated sawmill equipment(comact)
  • Calibration of hydraulic axis(Temposonic rods, servo valves)
  • Building and setting up industrial control panels

Automation Technician

Memco Controls
Moncton, New-Brunswick
07.2020 - 04.2021
  • Building HMI, graphics and control drawings to satisfy client's automation requirements
  • Working with Automated Logic BMS
  • Commissioning/Start up
  • Control systems integration
  • PID loop tuning
  • Developing technical solutions to resolve complex range of HVAC problems
  • Troubleshooting with the help of BMS system programs and trends
  • Create, troubleshoot and improve automation programs
  • Diagnose, fix and optimize electrical control systems
  • Gained knowledge with Bacnet MS/TP, Bacnet IP, Bacnet Ethernet and Modbus
  • Programmed different jobs successfully while following sequence of operation

Apprentice Electrician

Zenabis
Atholville, New-Brunswick
08.2019 - 05.2020
  • Installing safety systems, including emergency lighting, uninterruptible power systems and battery systems
  • Working with Delta Controls BMS
  • Building process programs in structured text for different applications
  • Calibration and installation of pH, conductivity, humidity, temperature and current sensors
  • Troubleshooting with the help of BMS system programs and trends
  • GMP
  • Understanding of PLC's and communication protocols
  • Strong automation/process and HVAC skills and understanding
  • Operating scissor lifts and aerial boom lifts
  • Responding to emergency calls and providing onsite support
  • Troubleshooting HVAC controls
  • Identified and addressed hazards, defects and repair requirements through inspection of electrical equipment
  • Installing conduit, wire and motor controls
  • Troubleshooting of electrical/electronic control circuits

Apprentice Electrician

EL Electric
Atholville, New-Brunswick
11.2018 - 04.2019
  • Building PLC/BMS control cabinets including fully automated irrigation station without any plans
  • Changing over an active control system without any hiccups
  • Wirring and commissioning several sensors, controllers and VFD's
  • Installing basket and ladder type cable tray and supports
  • Setting up equipment and configure settings for optimal performance
  • Collaborated with more knowledgeable professionals to grow understanding of principles and trade standards
  • Inspecting existing wiring to identify problems such as short circuits
  • Installing new electrical components, enclosures, fixtures and motors

Apprentice Electrician

Design Built Mechanical
Charlo, New-Brunswick
06.2018 - 11.2018
  • Keeping work areas clean, neat and free of hazards
  • Operating scissor lifts and aerial boom lifts
  • Installing ladder type cable tray and supports
  • Installing enclosures, outlets, lighting and MCC
  • Structural bonding and distribution.
  • Transporting tools, materials and supplies to job locations
  • Gather required tools and equipment for each task to increase efficiency
  • Dug trenches and created holes to pull conduit and install supports
  • Reviewing blueprints and electrical schematics to perform tasks to specifications
  • Connection of wires to circuit breakers, transformers, UPS and MCC

Apprentice Electrician

Kent Homes
Bouctouche, New-Brunswick
02.2018 - 05.2018
  • Reviewing blueprints and electrical schematics to perform tasks to specifications
  • Installing enclosures, outlets and lighting
  • Roughed in and finished various mobile homes according to plan
  • Following all relevant electrical and building codes for each job
  • Working in team-based environment to accomplish projects
  • Keeping work areas clean, neat and organized for efficient operations
  • Listen to directives of senior electrical professionals to complete efficient tasks

Education

High School Diploma -

Polyvalente Roland Pepin
Campbellton. NB

Some College (No Degree) - Electrical

NBCC
Bathurst, NB

Skills

  • Strong troubleshooting skills
  • Instrument troubleshooting and calibration
  • Strong instrumentation/process control knowledge
  • Setting up and troubleshooting VFD's
  • Self learner
  • Mechanically inclined
  • PLC program reading and writing skills
  • Efficiently reads schematics and blueprints
  • Bilingual
  • Strong computer skills including AutoCAD and microsoft office

References

  • References on demand

Certification

  • Red Seal Electrician
  • Fall protection
  • Working at heights Ontario
  • Lock out tag out
  • Basket and aerial platform
  • WHMIS 2015
  • Hilti powder actuated tool
  • Fit test

Timeline

Industrial Electrician

IAMGOLD Côté Gold Mine
03.2024 - Current

Instrumentation Electrician

Canadian Royalties
03.2024 - 05.2024

Industrial Electrician

MP Solutions Inc.
12.2023 - 03.2024

Instrumentation Electrician

Stornoway Diamonds
05.2022 - 11.2023

Industrial Electrician

Industries GDS
04.2021 - 05.2022

Automation Technician

Memco Controls
07.2020 - 04.2021

Apprentice Electrician

Zenabis
08.2019 - 05.2020

Apprentice Electrician

EL Electric
11.2018 - 04.2019

Apprentice Electrician

Design Built Mechanical
06.2018 - 11.2018

Apprentice Electrician

Kent Homes
02.2018 - 05.2018

High School Diploma -

Polyvalente Roland Pepin

Some College (No Degree) - Electrical

NBCC
Miguel Levesque