Summary
Overview
Work History
Education
Skills
Certification
LANGUAGES
Timeline
Generic

MAYOORR ZAGADAY

Sherwood Park,Canada

Summary

Effective at resolving issues and achieving challenging goals, while exhibiting excellent work and time management expertise. Experienced in both upstream and Downstream projects of the Oil and Gas Industry, which includes Piping, pipeline constructions, Pressure vessels, Heat Exchanger, Boilers, Various types of Valves, Rotary equipment, installation and construction & repair of low- and high-pressure piping system and their components which carry water, steam, chemicals, air, and fuel using isometric, blueprint, P& id and as-built Drawing. Testing the systems, troubleshooting, and ensuring their ongoing functionality. Experience in Shop spool fabrication, Modular assembly, new construction pipe & spool installation, Shutdown, Maintenance, Pre-commissioning, Commissioning, Outage, Vessel installation, and maintenance. Well-versed in ASME, API, AND CSA Construction codes. Strong time management skills and ability to handle a multitude of tasks. Strong commitment to safety. Self-motivated and well organized, and able to work on high-pressure deadlines.

Overview

13
13
years of professional experience
1
1
Certificate

Work History

QC Inspector

SEVEN LAKES METAL & FABRICATION LTD.
01.2025 - 05.2025
  • Material Inspection: Verifying that materials used in repairs or upgrades meet the required specifications and standards.
  • Welding Inspection: Ensuring that welding procedures and quality are in compliance with industry standards.
  • Equipment Inspection: Checking that equipment is properly installed, calibrated, and functional.
  • Process Verification: Monitoring and confirming that shutdown procedures are followed correctly.
  • Safety Procedures: Ensuring that safety protocols are in place and followed by workers during the shutdown.

QC STRUCTURAL INSPECTOR II

MIDWEST STRUCTURAL
10.2024 - 01.2025
  • Ensure all ITP stages are followed and complied with
  • Structural steel pre-fabrication inspection and release, Material receiving inspection and release, created weld maps, traceability maps, and as-built drawings using blue beam editing software
  • Witness and perform weld audits and inspections for welding qualifications for 3G, 4G, and 6GR positions of both structural and pipe welding in SMAW, FCAW, GTAW & GMAW
  • Conducts onsite inspections and supervises work in progress to ensure compliance with drawings and specifications
  • Provide necessary directions to contractors and prepare progress reports to clients.

QC STRUCTURAL INSPECTOR II

WAIWARD INDUSTRIES
07.2023 - 12.2024
  • Ensured and checked all the welder joints by inspecting them with the required tools and procedures
  • Assisted in construction coordination in the inspection of various welding units
  • Ensure all ITP stages are followed and complied with
  • Structural steel pre-fabrication inspection and release, Material receiving inspection and release, created weld maps, traceability maps, and as-built drawings using blue beam editing software
  • Built data books and organized logs of welder identification and welding performance per procedures and code
  • Assisted NACE Certified Inspector with anchor profiles and other Non-destructive examinations such as holiday testing and adhesion test of coating
  • Assisted Non-Destructive Testing such as Magnetic Particle, Liquid Penetrate, and Ultrasonic as well as being a Level II Visual Inspector
  • Witness and perform weld audits and inspections for welding qualifications for 3G, 4G, and 6GR positions of both structural and pipe welding in SMAW, FCAW, GTAW & GMAW
  • Conducts onsite inspections and supervises work in progress to ensure compliance with drawings and specifications
  • Provide necessary directions to contractors and prepare progress reports to clients.

QA / DOCUMENT SPECIALIST

Enbridge
01.2024 - 08.2024
  • The Primary focus is to assist in the integration activities associated with the acquisition of pipeline and facility assets
  • Assist in Engineering Records quality and processing reviews for other client Programs and Projects
  • Reviewing Engineering records packages and determining the package contents and records classification
  • Split and apply metadata following Client Classification and standards with project and turnover groups to resolve deficiencies and ensure records are verifiable, traceable, and complete
  • Assist in other records projects including metadata preparation, ad-hoc reviews, and record searches.

QC INSPECTOR

Worley Cord
02.2023 - 06.2023
  • Review and verify Material Test Reports (MTRs)
  • Control of nonconforming materials
  • Verification of correct material release and traceability (identification) maintained throughout manufacture
  • Notify the Client and/or Authorized Inspector (AI) before the start of work and ask for a witness or hold points
  • Verify welder qualification record suitability for the scope of work
  • Ensure control of welding consumables, including storage of low-hydrogen electrodes
  • Verify welding is being performed within the parameters of the accepted Welding Procedure Specification(s)
  • Perform a visual inspection of joint preparation, fit-up, in-process welding, and complete welding for compliance with the WPS, client specifications, and Code of Construction
  • Prepare Non-destructive Examination (NDE) requests and review NDE Reports
  • Prepare Post-Weld Heat Treatment (PWHT) instructions and review final PWHT documentation to verify cycles meet or exceed the requirements of the applicable WPS(s)
  • Prepare pressure testing packages, obtain client written approvals, and witness pressure tests
  • Ensure that monitoring and measuring equipment.
  • Pressure test gauges, welding equipment, etc.) have been calibrated within the previous 12 months
  • Interface with the AI for vessel repair, alterations, and ASME B31.1 BEP
  • Perform quality surveillance
  • Assist with identifying, controlling, and resolving nonconforming products and services.

QC INSPECTOR LEVEL 2

Worley cord
08.2022 - 02.2023
  • Familiar with and understanding ITPs and progressively signing off
  • Perform visual inspections on welds
  • Flagging welds for NDE requirements
  • Coordinating NDE contractor when NDE is ready
  • Verifying heat numbers and familiar with MTR's
  • Become knowledgeable using clients' specifications and procedures
  • Weld mapping, NDE mapping, heat mapping
  • Participate in completing final turnover documents and books to turn over to the client
  • Verifying that the material for fabrication or installation is correct
  • Verifying inspections are carried out as per client specifications and code requirements
  • Inspections and evaluations of welds according to specified inspection procedures, standards, and codes
  • Record various welding inspection results using a QSR (Quality Surveillance Report)
  • Ensure that all materials used are according to project guidelines and valid codes and specifications
  • Identify possible NCRs and suggest Preventative and Corrective Actions
  • Witnessing hydrostatic tests

QC INSPECTOR II

WAIWARD INDUSTRIES
04.2022 - 06.2022
  • Develop disciplined ITPs and ensure stages are followed
  • Material receiving inspection and heat no
  • Verification
  • Maintaining welder qualification records and Monitoring steps Before welding, During Welding & After welding
  • Visual inspection of all completed Welds
  • Witnessed Closure welds/Tie-in welds
  • Flagging for NDE
  • Coordinate, Monitor, and Review NDE Reports
  • Visual Inspection of flange faces
  • Verified Final Torquing
  • Verifying all NDT completion releasing the piping for hydro test/Pneumatic test
  • Hydrotest/Pneumatic test package built and test witnessing
  • Final piping reinstatement Walk down with Client
  • Final Turnover Completion

QUALITY CONTROL INSPECTOR

PHOENIX INDUSTRIAL
02.2021 - 03.2022
  • Reporting to the, and Project Manager
  • Develop discipline ITPs and ensure stages are followed
  • Pipe spool fabrication inspection
  • Read piping isometrics, GAs, and PIDs
  • Material receiving inspection and verification
  • Maintaining welder qualification record
  • Monitoring welding and carrying out final weld visual inspection
  • Coordinate, monitor, and Review NDT and reporting
  • Verifying all NDT completion releasing the piping for hydro test/Pneumatic test
  • Final piping reinstatement inspection and witnessing applicable bolt torque
  • Experience with weld mapping and as-built drawings
  • Flange face inspection
  • Hydrotest package review and test witnessing
  • Insulation installation monitoring and inspection
  • Turnover binder progressive development, review, and completion.

QC INSPECTOR II

TECK AWTF PROJECT, TRADESMEN - ENTERPRISES LTD
10.2020 - 01.2021
  • Produce NDE requests and delegate these to the QC Inspectors
  • Ensure the NDE Subcontractor's measuring tools have been calibrated by an approved agency and are not out of calibration date such as NDE, PWHT companies, gauges, etc.
  • Ensure NDE contractors' procedures have been client-approved and they have proper NDE technician qualifications along with annual eye exams
  • Ability to work in a fast-paced environment and in winter conditions
  • Knowledge of AB-83, able to fill out and complete for client sign-off
  • Ensuring welders are qualified for the material they are welding, knowing P#s and F#s
  • Ensuring welders are qualified and working within the parameters of the WPS
  • Ensure Records of all modifications on the master copy of drawings, for the issue of As-Built drawings
  • Ensure material quality, and traceability and certify that all tests are made according to project technical documents and applicable codes and specifications
  • Maintain a record of all tests
  • The extent of testing shall be as foreseen in contractual project specifications
  • Ensure that construction is working on the last contractual edition of all drawings and all technical documents
  • Verification and control of the welding process according to the approved WPS and all applicable codes and standards, monitoring and inspecting all work performed by trackers and welders and/or welding operators
  • Ensure quality plans, ITPs, etc.
  • Are finalized and approved by project management before the commencement of the work scope
  • Attending QC meetings
  • Performing good organizational skills
  • Multitask simultaneously between tasks
  • Involved in building hydro-test package

QC STRUCTURAL INSPECTOR II

JLG INDUSTRIES AT NUTRIEN FERTILIZER
09.2020 - 10.2020
  • Ensured and checked all the welder joints by inspecting them with the required tools and procedures
  • Assisted in construction coordination in the inspection of various welding units
  • Performed audits and various pre- and post-welding procedures
  • Created weld maps, traceability maps, and as-built drawings using Adobe Acrobat editing software
  • Built data books and organized logs of welder identification and welding performance per procedures and code
  • Assisted NACE Certified Inspector with anchor profiles and other Non-destructive examinations such as holiday testing and adhesion test of coating
  • Assisted Non-Destructive Testing such as Magnetic Particle, Liquid Penetrate, and Ultrasonic as well as being a Level II Visual Inspector
  • Witness and perform weld audits and inspections for welding qualifications for 3G, 4G, and 6GR positions of both structural and pipe welding in SMAW, FCAW, GTAW & GMAW
  • Conducts onsite inspections and supervises work in progress to ensure compliance with drawings and specifications
  • Provide necessary directions to contractors and prepare progress reports to clients.

QC INSPECTOR II

TRADESMEN ENTERPRISES LTD -TECK AWTF PROJECT
08.2020 - 09.2020
  • Field inspection
  • Check all MTR Pipe, valves, and all fittings
  • Perform walk-downs
  • Develop a deficiencies (Punch) list
  • Provide feedback to QC Lead on findings

QC INSPECTOR II

WORLEY CANADA ULC, Shell Scot-ford T/A & Shutdown
06.2020 - 08.2020
  • Ensured all ITP stages were followed and completed as per Shell Specifications, and Code Standards and signed off both
  • Vendor and I as a QA representative for Shell
  • Performed material checks against ISO's and dimensional checks of piping and structural members, as well as ensuring correct alignment and all items listed on ISO's are on their correct coordinates, piping, buildings, and structural modules
  • Performed cleanliness checks of internal piping to ensure the removal of dirt, debris, or any foreign unwanted materials
  • Performed pipe weld inspections and structural weld inspections
  • Performed surveillance inspections to ensure the Vendor is following the Shell approved Procedures and applicable Codes
  • Reviewed NDE (RT, UT, MT, PT, FT, BHN, PMI & PWHT) Reports
  • Ensured WPS are approved, and welders are qualified for the welding procedure used for production welding
  • Ensured material identification & traceability of welding consumables and all installed materials
  • Monitored in-process closure welds abiding by Shell's closure weld procedure and completed AB-519 forms for weld completion
  • Performed flange face inspections as per PCC-1 and witnessed final bolt-torquing with hand wrenches and hydraulic torquing pumps/heads
  • Reviewed and stayed current with RFI's/NCRs applicable to the Vendors
  • Performed material checks on consumable materials such as welding rods
  • Performed Surveillance of Rod Oven Temperatures
  • Performed surveillance inspections on welder qualification records, took readings, and verified welding parameters as per WPS during welder testing/production
  • Performed fabrication surveillance inspection activities on pipe prep, visuals on edge preparations, weld tack fit-up checks, weld inspections, straightness inspections, roundness inspections, and final dimension/on coordinate inspections for process pressure piping, structural steel, pressure vessels, buildings, and piping insulation
  • Provided daily inspection reports and maintained quality control files of all on-going
  • Piping/Vessel/Structural/Insulation/Fireproofing construction work
  • Reviewed documentation received from Contractors and Sub-Contractors (Procedures,) ITP's NDE Reports, Torque
  • Reports, ABSA Documentation (AB-83/AB-40), Governing/Owner's standard
  • Prepared/reviewed/signed off inspection release reports at various Turnaround and Shutdown Stages of scope
  • Witnessed Hydro's and performed inspections as per Hold Points on ITP's.

QC INSPECTOR

PHOENIX INDUSTRIAL
03.2020 - 06.2020
  • (MATERIAL RECEIVER & WELDING EXAMINER IN TRAINING), Checking all Code material received against the Purchase Order, packing slip, and MTR, and examining the material for visible damage, correct quantity, dimensions, verifying the thickness and writing the verified thickness on the MTR, and confirming that the material marking conforms to Code requirements
  • Verifying that the MTRs include physical tests and chemical analysis and conform to ASME Code Section II requirements, same
  • Edition and Addenda as indicated on the construction drawing
  • If the MTRs conform to ASME Code Section II, the QCI will stamp, indicate the Code Edition and Addenda used for verification, and then initial and date the MTRs
  • Ensuring that the Color Code and Coded Markings are detailed in Exhibit 9.3 are posted in the storage area and the shop
  • Ensuring that flanges and fittings are identified by job number and stored by the job when the material is assigned to a job
  • All welding consumables must conform to the SFA specification and AWS classification listed on the Purchase Order
  • Supervising the welding of test weldments, coordinating the preparation of test specimens and required non-destructive examination and mechanical testing, reviewing test results, preparing and certifying the Welder/Welding Operator Qualification
  • Record (AB-76A/B) for all Welder performance tests of Welders and Welding Operators that work on Code items, and issue the
  • Welders ID symbol

QC INSPECTOR

PRIMORIS CANADA
10.2019 - 03.2020
  • Annular Plates, Bottom Plates, Roof plates lying and fit-up inspection
  • Inspection of Shell Plates vertical fit up & Horizontal fit up
  • Modification of tanks with shell patch plates fit-up inspection
  • Inspection of nozzle orientation and fit-up inspection with RF pads
  • Carry out RF pad pneumatic test, Bottom & Roof plates vacuum box testing
  • Carry out inspection of Oil Penetrant test or MPI for shell plates with bottom plate's fillet weld
  • PT of shell plates Vertical seam & circumference seam back chipping inspection
  • Review of RT film for shell plates' vertical seam and circumference seam
  • Carry out inspection of Peaking and Banding of shell plates
  • Checks verify the plumb-ness and ovality of the Vertical storage tanks with application codes
  • Carry out Hydro test as per client requirement.

QC INSPECTOR II

BLACK & MCDONALD
09.2019 - 10.2019
  • Internal and external visual inspection of heat exchanger channel, tube bundles, floating head, and channel cover
  • Internal inspection of amine sump tanks, nozzles, flange, and gasket seating faces
  • Internal visual inspection of acid gas knockout drums
  • Internal visual inspection of the amine degeneration tower and the internals
  • Inspect the installation of Pumps, Turbines, and
  • Motors
  • Screw conveyors, fans, and ball mills
  • Supervised gasket drops, blinding, and torquing
  • Approval of all NDE examinations on pressure equipment
  • Performed field inspections of pressure vessels & boilers
  • Reviewed Inspection Test Plans as per the planned scope step listing from the client and ensured that all the signature columns were progressively signed off and executed as per applicable codes, standards, procedures, and client specifications
  • Verified systems against Isometrics, GA, and P&IDs
  • Coordinated and performed Material receiving inspections and verifications
  • Maintained welder qualification records, took readings, verified welding parameters as per WPS during welder testing/production welding, and did final visual inspections
  • Performed correct NDE as per client ITP specifications and code requirements
  • Verifying correct welds to flag for NDE, coordinating NDE technician personnel, and verifying NDE completion
  • Reviewed NDE (RT, UT, MT, PT, FT, BHN, PMI & PWHT) Reports.

PIPELINE INSPECTOR

B&W PIPELINE & INTEGRITY SERVICES
09.2018 - 08.2019
  • According to the standard, my responsibilities included planning, monitoring, evaluating, verifying, making informed decisions, and problem-solving.
  • Root cause analysis), documenting and reporting, and communicating effectively with the pipeline construction team to ensure the project is moving forward in a safe and efficient manner
  • I am complying with environmental and pollution control regulations
  • This includes acquiring appropriate local, state, and/or federal
  • Permits before construction, if necessary
  • The importance of environmental and pollution control is to enhance the quality of water, land, and air
  • Participate in Daily Safety Tailgate meetings including daily job hazard assessments
  • Complete daily reports on construction activities, progress, and issues
  • Verification that the project construction activities are working to approved inspection and test plans, welding procedures, and quality control inspection procedures
  • Verification that all materials are inspected for compliance with project specifications
  • Ensuring that the Welding Inspectors are performing welding quality control inspections
  • Validation of contractor welder and welding inspector qualifications
  • Verification of welder qualification to applicable welding procedures
  • Verification of welding consumable control and maintenance
  • Verification of material specifications, dimensions, and joint fit-up before welding
  • Verification of pre-heat temperature, inter-pass temperature, and post-weld cooling
  • Verification of correct filler metals and technique
  • Visual inspection of completed welds
  • Verify that non-destructive inspections are complete and documented
  • Review of Contractor welding quality control reports.

QC INSPECTOR

Aecom
08.2018 - 09.2018
  • Reviewed documentation received from Contractors and Sub-contractors (Procedures, 's NDE Reports, Torque Reports
  • ABSA Documentation, Governing/Owner's standards, etc.)
  • Performed dimensional inspections, receiving material inspections, weld visual inspections, pressure test inspections, and paint coating inspections
  • Issued/reviewed/closed audit findings, NCR, RFI's, etc.

QC INSPECTOR

Worley cord
06.2017 - 11.2017
  • Calibration and testing of instruments before installation
  • Visual inspection for complete and correct installation
  • Insulation and continuity testing of cables
  • Cleaning, flushing, pressure, and leak testing of pneumatic and hydraulic tubing
  • Adjustment of control, alarm, and shutdown settings
  • Loop testing
  • Punch point list for field instruments
  • WORKFORCE PLANNER AT SUNCOR EAST TANK FARM WITH

QC INSPECTOR

FLUOR CONSTRUCTION CANADA
04.2016 - 08.2016
  • Develop and execute work plans to accomplish a given scope of work
  • Monitor quantities and quality- demonstrates accuracy and thoroughness, applies feedback to improve performance & apply the correct method of measurement
  • Initiate and track work management system as per daily force report
  • Build close working relationships with Contractors, Field tradesmen, Supervisors, and Managers to maintain and improve dispatch performance, efficiency & safe work practice
  • Assist Maintenance operation, shutdown, and outage management in developing plans
  • Work with Engineers/ Contractors to manage material for specific projects, Plan and Repair the pipe system layout & installation according to standard, and Monitor NDT & Pressure test reports
  • QC INSPECTOR AT SHOP & MOD-YARD WITH

QC INSPECTOR

SAIPEM CONSTRUCTION CANADA
09.2015 - 05.2016
  • Performed monitoring and surveillance on behalf of the owner to ensure the quality standards and procedure programs put in place were followed by the Contractors and Subcontractors involved
  • Ensured full compliance with the regulatory requirements, applicable codes/standards, engineering specifications, drawings, and any special installation procedures were followed by Contractors and Sub-
  • Contractors involved
  • Ensured Contractors and Subcontractors are working to the latest revisions of specifications, drawings, procedures codes/ standards, and ITPs
  • Maintained detailed records of the work, including all observations and concerns
  • Provided daily/weekly inspection reports and maintained quality control files of all ongoing Piping/Vessel/Structural/Insulation/Fireproofing construction work
  • Implemented quality audits and surveillance plans and issued reports such as corrective actions, non-conformance reports, and observations
  • Worked with contractors and sub-contractors to ensure clarity in understanding technical specifications
  • Reviewed documentation received from Contractors and Subcontractors (Procedures, ITP's NDE Reports
  • Torque Reports, ABSA Documentation, Governing/Owner's standards, etc.)
  • Performed dimensional inspections, receiving material inspections, weld visual inspections, pressure test inspections, and paint coating inspections
  • QC INSPECTOR AT HUSKY SUNRISE, FORT MCAY.

QC INSPECTOR

SAIPEM CONSTRUCTION CANADA
03.2014 - 06.2015
  • Witnessed pressure tests of piping/components with the client quality representative as required
  • Performed material inspections and verified material for process pressure piping, structural steel, pressure vessels, storage tanks, and piping insulation
  • Witnessed pump alignments in coordination with pipe strain
  • Assisted in the development of our Weld-NDE matrix based on the client's specifications and regulatory standards
  • Performed fabrication inspection activities such as marking areas to be cut, visuals on edge preparations, weld tack fit-up checks, weld inspections, straightness inspections, roundness inspections, final dimension/on coordinate inspections for process pressure piping, structural steel, pressure vessels, storage tanks, and piping insulation
  • Coordinated with QA and construction on quality-related documentation and processes such as (NCRs, QSR's
  • RFI's, FNI's, etc.) until witnessed work construction completion and sign-off construction mark-ups for final redlines
  • Reviewed Partial AB83s and compiled Final AB83s and coordinated with QA for final sign-off completion of the regulatory AB83 document
  • Coordinated and performed Material receiving inspections and verifications
  • Performed pipe weld inspections and structural weld inspections
  • Performed material checks on consumable materials such as welding rods
  • Performed Surveillance of Rod Oven Temperatures witnessed Hydro's and performed inspections as per Hold
  • Points on ITP's

JOURNEYMAN PIPEFITTER

FLINT ENERGY
02.2012 - 12.2013
  • Layout, assemble, fabricate, maintain, and repair piping systems that carry water, steam, chemicals, or fuel used in heating, cooling, lubricating, and other processes
  • Remove and replace worn components, do general maintenance work, and work on plant shutdowns
  • Demonstrate knowledge of functional operation of various piping system components by measuring, cutting, threading, grooving, and bending of pipes, valves, and fittings
  • Specialization in maintenance, quality control, rigging, fabrication, and installation of various types of systems and specialty piping
  • Select pipe sizes & types of material, such as supports, Hangers, Guides & Anchor, Base supports, and Canty-liver supports
  • Work on minimum ½” to Maximum 48” Pipe
  • Hydro test / Pneumatic test and install fabricated pipe spools within structural steel modular assemblies, adding designed supports as required
  • Use testing equipment effectively to check for system leaks and troubleshoot fitting errors
  • Maintain all tools, work area, and equipment in a clean and orderly fashion
  • Read and interpret client and company-supplied construction fabrication drawings and specifications
  • Red-line update drawings to an as-built condition
  • Join pipe sections, and related equipment and secure in position

Education

High School Diploma -

Chogale High School
03.1997

Skills

  • Quality assurance
  • Mechanical quality assurance
  • Piping inspection expertise
  • Document management
  • Database log management
  • Process management
  • Non-destructive testing methods
  • Visual assessment skills
  • Precision equipment calibration
  • Blueprint analysis
  • Material analysis
  • Data reporting
  • Quality inspections
  • Quality assurance inspection
  • Quality assurance management
  • Data report creation
  • Quality inspection procedures
  • Quality assurance strategy
  • Schematic analysis
  • Document management software proficiency

Certification

  • CWB LEVEL 2
  • API-510
  • WELDING EXAMINER
  • RED SEAL JM STEAM-PIPE FITTER.

LANGUAGES

English: Full Professional
Full Professional

Timeline

QC Inspector

SEVEN LAKES METAL & FABRICATION LTD.
01.2025 - 05.2025

QC STRUCTURAL INSPECTOR II

MIDWEST STRUCTURAL
10.2024 - 01.2025

QA / DOCUMENT SPECIALIST

Enbridge
01.2024 - 08.2024

QC STRUCTURAL INSPECTOR II

WAIWARD INDUSTRIES
07.2023 - 12.2024

QC INSPECTOR

Worley Cord
02.2023 - 06.2023

QC INSPECTOR LEVEL 2

Worley cord
08.2022 - 02.2023

QC INSPECTOR II

WAIWARD INDUSTRIES
04.2022 - 06.2022

QUALITY CONTROL INSPECTOR

PHOENIX INDUSTRIAL
02.2021 - 03.2022

QC INSPECTOR II

TECK AWTF PROJECT, TRADESMEN - ENTERPRISES LTD
10.2020 - 01.2021

QC STRUCTURAL INSPECTOR II

JLG INDUSTRIES AT NUTRIEN FERTILIZER
09.2020 - 10.2020

QC INSPECTOR II

TRADESMEN ENTERPRISES LTD -TECK AWTF PROJECT
08.2020 - 09.2020

QC INSPECTOR II

WORLEY CANADA ULC, Shell Scot-ford T/A & Shutdown
06.2020 - 08.2020

QC INSPECTOR

PHOENIX INDUSTRIAL
03.2020 - 06.2020

QC INSPECTOR

PRIMORIS CANADA
10.2019 - 03.2020

QC INSPECTOR II

BLACK & MCDONALD
09.2019 - 10.2019

PIPELINE INSPECTOR

B&W PIPELINE & INTEGRITY SERVICES
09.2018 - 08.2019

QC INSPECTOR

Aecom
08.2018 - 09.2018

QC INSPECTOR

Worley cord
06.2017 - 11.2017

QC INSPECTOR

FLUOR CONSTRUCTION CANADA
04.2016 - 08.2016

QC INSPECTOR

SAIPEM CONSTRUCTION CANADA
09.2015 - 05.2016

QC INSPECTOR

SAIPEM CONSTRUCTION CANADA
03.2014 - 06.2015

JOURNEYMAN PIPEFITTER

FLINT ENERGY
02.2012 - 12.2013

High School Diploma -

Chogale High School

Similar Profiles

CREATE PROFILE
MAYOORR ZAGADAY