Les Hetman

• Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
• Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
• Welded in flat, horizontal, vertical, and overhead positions.
• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
• Accessed difficult work areas using rope access

• Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
• Utilized schematic drawings to prepare material, fit up and weld projects and ensure they meet required specifications
• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Welded in flat, horizontal, vertical, and overhead positions.
• Inspected welds and checked critical measurements to meet specifications.

CWB cutting, material prep, fit up and welding

• Set up and operated shielded metal arc and gas metal arc welding equipment.
• Read drawings and prepared material for projects
• adhered to required tolerances and specs as per schematic drawings

B Pressure pipe welding

• SMAW and FCAW pressure pipe welding
• Utilized power rollers and positioners for increased efficiency
• Large diameter pipe as well as small bore and socket welds