Kishore Sukshavasi
RF Designer
Ottawa
Summary
Enthusiastic RF Designer eager to contribute to team success through hard work, attention to detail and excellent organizational skills. Clear understanding of Electronic/communication product market requirements. Motivated to learn, grow and excel in Satcom /Telecom Equipment Industry.
Overview
20
20
years of professional experience
6
6
years of post-secondary education
Work History
RF Hardware Developer
Ericsson Canada Inc
6 2021 - Current
- Design & Development of Indoor 4x4 MIMO 5G Radio Base Stations for various 5G Frequency bands
- Derived RF Front end specifications from requirement documents
- RF-line-up calculations/simulations (HFSS/AWR/ADS), and components selection
- Derived DC power tree, DC-DC converters selection and design
- HSI document creation (Hardware & Software interface)
- Schematic capture, Layout support
- Interaction with PCB manufacturers and solving DFM issues
- Prepared Components de-rating/margin analysis report
- Testing of RF Hardware at module and system level
- Interaction with mechanical team for design of housing, RF shield, and thermal simulations
- Prepared Design verification report
- Product transfer to production & RMA support
- Evaluated new technologies to determine their potential impact on existing product lines and future developments
RF/Electrical Engineer
Norsat International Inc
02.2020 - 06.2021
- Design and development of K-Band LNB (17.7-20.2GHz) for VSAT application.
- Designed K-Band LNA with Noise figure of 1.4dB
- Architecture selection (Single conversion vs Double conversion)
- RF-line-up calculations/simulations using HFSS/ADS/ADI Sim PLL
- Designed Transmit reject filter, Synthesizers and IF sections.
- Component selection (Mixers, Synthesizers, Oscillators, Switches, DC-DC converters)
- Schematic capture and Layout design using Altium software.
- Performed in-depth RF testing of LNB
- Prepared Design review documents (CDR, PDR and FDR documents)
- Interaction with Mechanical team for Housing and RF shield design
- Estimated project costs and resource allocation to forecast budget requirements and monitor adherence
Senior RF Design Engineer
WAVESTREAM CORPORATION (ASAIA) PTE LTD
11.2019 - 01.2020
- Participated in the testing of 16W KU BUC for a short period.
- Reason for short term employment :Relocated to Canada after acquiring permanent residency status
Principal Engineer
iDirect Asia Pte Ltd /ST Electronics (Satcom & Sensor Systems) Pte Ltd
03.2011 - 11.2019
- Design and Development of VSAT (very small aperture terminal) products for satellite communication especially BUC (Block Up Converter) & SSPA.
- Designed C, X, Ku and Ka Band Block Up Converters (transmitter) for SATCOM Industry.
- Designed Local Oscillator/Synthesizers up to frequency 30GHz.
- Designed C (5-7GHz), X (7-9GHz), Ku (13-15GHz) and Ka band (28-31GHz) Block up converters for VSAT market
- Designed Solid-State Power Amplifiers for VSAT market using GaAs and GaN technologies.
- Designed various frequency band Micro-strip filters.
- Conduct different test and measurements using VNA, Spectrum Analyzer, Signal Generator, Power Meter etc. for products with frequency up to 40GHz.
- Designed power management circuitry such as LDO, switch mode DC-DC Converters.
- Experienced in using EDA simulation tools (Microwave Office, HFSS, and ADS), PCB layout tools (Altium- Designer).
- Explored various High power combining techniques and Waveguide parts.
- Experienced with communication protocols like SPI, I2C, UART, RS-232, RS-485 and Ethernet.
- Designed satellite modem front end with AD9361 transceiver chip.
- Experienced with micro-controller board design, Thermal testing, Reliability and RMA issues.
- Oversaw QA/QC process to improve product quality and production yield
Senior Staff Electrical Engineer
Motorola Solutions
02.2009 - 02.2011
- Designing of TETRA Mobile Radio (350-430MHZ)
- Designed Receiver based on Direct conversion Architecture.
- Characterization of Motorola’s next generation Base band IC for TETRA platform.
- Developed AGC algorithm for TETRA TMO and DMO modes.
- Designed Low Noise Amplifier and Tunable Band pass filter.
- Pre-Silicon Validation of Baseband IC.
- Receiver Linearity improvement.
- Receiver budget calculations (P1dB, IP3, IP2, Gain, Phase noise and Dynamic range).
- Selection of Clock rates, sampling frequencies, Base-band filter cut- off frequencies, Decimation rates.
- Schematic capture and layout support.
- Tested Radio as per ETSI standard.
Senior Engineer
Honeywell Technology Solution Lab Pvt Ltd
06.2008 - 02.2009
- Redesigned Avionics Radio’s to address component obsolescence issues.
- Proposed alternate solutions/parts to improve reliability of VHF Radio’s, DME, Altimeter, ADF and Localizer.
- Proposed alternate solutions for VHF Radio's for cost reduction.
Senior Engineer
Tata Elxsi Ltd
12.2006 - 06.2008
- Designed RF Front end/Tuner for Satellite, cable and terrestrial Set top box.
- RF board schematic capture and layout guidance.
- Evaluated RF chip sets from different suppliers to confirm performance.
- Experienced with RF simulation tools and Audio and Video standards.
- Conducted temperature tests and resolved various RF performance and Reliability issues.
- Experienced with Digital and Analog modulation techniques like QPSK, QAM, 8PSK, AM and FM.
- Assessed scope and requirements to assist with project design determinations
RF Engineer
SV Technologies
06.2004 - 11.2006
- Designed solution for DECT based Micro BTS with single TRX for GSM.
- Designed of S band tracking receiver with AM and FM demodulators.
- Designed L,C and X band UP/down converters.
- Worked with external labs for RE and EMI/EMC testing
Education
Bachelor of Technology - Electronics & Communications Engineering
Jawaharlal Nehru Technological University
Hyderabad 08.2001 - 05.2004
Diploma - Electronics & Communications Engineering
SVL Polytechnic
Machilipatnam,India 07.1996 - 05.1999
Skills
Experienced in designing of VSAT terminals (BUC& LNB) , 5G Indoor Radio Base station, Avionics Radio’s , Tetra Mobile Radio's and Up/Down converters RF Simulation tools: HFSS, AWR and ADS PCB layout tools: Altium, Pads and Allegro
undefinedTimeline
RF/Electrical Engineer
Norsat International Inc
02.2020 - 06.2021
Senior RF Design Engineer
WAVESTREAM CORPORATION (ASAIA) PTE LTD
11.2019 - 01.2020
Principal Engineer
iDirect Asia Pte Ltd /ST Electronics (Satcom & Sensor Systems) Pte Ltd
03.2011 - 11.2019
Senior Staff Electrical Engineer
Motorola Solutions
02.2009 - 02.2011
Senior Engineer
Honeywell Technology Solution Lab Pvt Ltd
06.2008 - 02.2009
Senior Engineer
Tata Elxsi Ltd
12.2006 - 06.2008
RF Engineer
SV Technologies
06.2004 - 11.2006
Bachelor of Technology - Electronics & Communications Engineering
Jawaharlal Nehru Technological University
08.2001 - 05.2004
Diploma - Electronics & Communications Engineering
SVL Polytechnic
07.1996 - 05.1999
RF Hardware Developer
Ericsson Canada Inc
6 2021 - Current
Similar Profiles
Sushant KumarSushant Kumar
RF Lab Support Admin at Ericsson Canada IncRF Lab Support Admin at Ericsson Canada Inc
Balachandar DilliBalachandar Dilli
DevOps Engineer at Ericsson Canada IncDevOps Engineer at Ericsson Canada Inc
Shoaib IqbalShoaib Iqbal
5G Wireless Network Engineer at Syntronic Research & Development Canada Inc. (Ericsson Canada Inc.)5G Wireless Network Engineer at Syntronic Research & Development Canada Inc. (Ericsson Canada Inc.)
Cameron CrossCameron Cross
Founder & Principal Consultant at Cross Corp. FinancialFounder & Principal Consultant at Cross Corp. Financial
Alexandra Belizaire SolitaireAlexandra Belizaire Solitaire
Stages cliniques dans les milieux de soins at Centre de soins de longue duréeStages cliniques dans les milieux de soins at Centre de soins de longue durée