JUAN Padilla
Los Banos
Summary
Skilled and highly experienced Technician with advanced technical experience in RF, electrical, and mechanical production, assembly, calibration, rework/repair, and customer service. Highly experienced in electronics, electrical, and RF test and measurement as well as repair, rework, and assembly. Highly experienced also in interpreting schematics, work instructions, and layout designs to test, troubleshoot, and build and able to effectively communicate and problem solve. Background includes effectively working independently and as part of a team. Excellent troubleshooting, diagnostic, and computer skills. Organized, proactive, and quality-driven with strong attention to detail and desire to make positive impact on team success.
Overview
5
5
years of professional experience
Work History
Customer Service Technician
Anritsu
04.2023 - Current
- Perform tests and calibrations on high level with unique test and measurement instrumentation.
- Use troubleshooting, repair/rework, measurement, and calibration knowledge to work on unique equipment.
- Help interact with customer to determine needs relating to traceability, adequacy of standards and test procedures utilized by Anritsu as well as for items requiring repair or limited calibration.
- Ensure that maintenance of the laboratory's equipment is performed in a timely and acceptable manner.
- Manage work load distribution when the Laboratory Manager is not available.
- Perform daily inspections of the incoming equipment to verify accessories and manuals are available, firmware is updated, malfunctions of customer instrumentation, and to change equipment and order status when appropriate.
Engineering Lab Technician
Apple Inc.
04.2022 - 04.2023
- Assembly of wire harness requiring stripping wires, soldering pins, and installation of connector backshells.
- Assembly of mechanical racks, shelves, arms, jigs and fixtures and electrical equipment sub-assemblies
- Positioned and aligned parts in specified relationship to each other in jig, fixture, or other holding device.
- Followed verbal instructions and hand sketches to adapt and modify tooling.
- Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place, using handtools, power tools, machines, and equipment.
- Mounted assembly components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel.
- Repaired AC/DC circuits, digital and fiber optic circuits, power supplies, and servo systems.
- Collaborated with engineers in new product introduction phases to develop and verify design changes.
- Set up, calibrated, and operated engineering equipment.
- Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points, using soldering, thermocompression, or related bonding procedures and equipment.
- Install and finished assemblies or subassemblies in cases and cabinets.
- Assemble and attach hardware, such as caps, clamps, knobs, and switches, to assemblies.
- Performed intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding parts and assemblies.
- Adjust or trim materials from components to achieve specified electrical or dimensional characteristics.
- Perform assembly operations under microscope or other magnifying device.
Electro-Mechanical Technician
Gener8
05.2021 - 03.2022
- Proposed layout and location modifications and installations in compliance with OEM, OSHA, NEC and company and local codes.
- Observed equipment functioning to detect electronic and mechanical hazards or problems for service, repair or replacement.
- Investigated electrical malfunctions with ammeter, multimeter and temperature probe test instruments to determine problems and apply solutions.
- Meet with staff to discuss equipment performance issues and formulate improvement ideas.
- Fixed, serviced and mounted pumps, gearboxes and piping systems utilizing blueprints and hand tools.
- Fabricated fixtures, stands and covers and assembled components from sketches and drawings.
- Repaired, maintained and installed motors, drives and wiring devices.
- Identified and specified required parts to repair and rebuild manufacturing equipment.
- Installed and modified equipment to minimize material waste, facilitate future maintenance and avoid hazardous and unreliable equipment performance
- Read and interpreted blueprints, technical drawings, schematics, and computer-generated reports.
- Trained on-site operators in installation, use and maintenance of robotic systems.
Electronic-Mechanical Assembler
Paramit Corporation
10.2020 - 04.2021
- Conducted operations using Vpoke software to insure correct assembly of boards and components.
- Used microscope to quality inspect and solder small components
- Executed entire assembly process by accurately interpreting set-up sheets, work orders, drawings or blueprints.
- Put hazardous materials in properly marked containers to avoid injuries or contamination.
- Analyzed project specifications and other instructions prior to job start to pinpoint all tasks and determine completion dates.
- Verified part numbers and placed parts in appropriate shipping containers.
- Closely inspected parts for cleanliness and freedom from contaminants.
- Correctly and safely used variety of hand tools, saws and cutting equipment to carry out job duties.
- Sampled and tested final products to check conformance with production tolerances.
- Checked position and alignment of each component to prevent errors and minimize materials waste.
- Inspected and tested components, assemblies and power tools for proper functionality.
- Received and processed both written and verbal instructions, prints and work orders.
- Planned and paced work efficiently in order to meet daily, weekly, project or production goals.
- Conducted quality assurance inspections on finished components and identified issues.
- Installed protective devices such as bracing, padding, or strapping to prevent shifting or damage during shipping.
- Deburred, polished and painted surfaces.
- Notified engineering of errors and discrepancies.
- Disassembled and inspected components.
CNC Machine Operator
Paramit Corporation
10.2020 - 04.2021
- Properly loaded and unloaded materials in and out of machines.
- Loaded and unloaded parts to maintain high level of production.
- Moved finished work to correct staging area for disposition.
- Verified appropriate product lubrication and cooling throughout machine operation.
- Completed all paperwork, recognizing any discrepancies and addressing them in a timely fashion.
Electronic Assembler
Terrasat Communications Inc.
07.2019 - 08.2020
- Assembled components per technical specifications and production guidelines.
- Completed surface mount soldering of printed circuit boards.
- Conducted, maintained, and repaired (rework) electronic components, parts, equipment, and systems.
- Completed high-quality products with skilled assembly of systems, supports and connections.
- Inspected completed products for functionality and quality, alerting supervisors of repeat issues and seeking out root causes.
- Reviewed building diagrams and blueprints to determine errors in electronic equipment installations.
- Employed mechanical presses, hand tools and heat guns to assemble and disassemble parts and products.
- Performed validation builds and engineering sample builds to test products.
- Inputted data and specifications into [Software] for recordkeeping and future reference.
- Assembled and soldered metal parts to create electronic circuit boards.
- Reworked, repaired and adjusted cable assemblies and harnesses to meet safety standards.
- Installed completed assemblies into cases.
- Stayed up-to-date on electrical codes and safety procedures to maintain efficiency and safety.
Education
Associate of Science - Computer Science And Programming
Merced College
Los Banos, CA05.2024
High School Diploma -
Pacheco High School
Los Banos, CA07.2019
Skills
- 5 Years Experience
- Electro/Mechanical Technician
- Electronics Technician
- RF Technician
- Customer Service Technician
- Lab Technician
- Electrical/RF Devices
- Spectrum Analyzers
- Vector Network Analyzers
- Oscilloscopes
- Frequency Counters/Power Meters
- Hand/Microscope Soldering
- Wire Harness/Cable Assembly
- Wire Harness/Cable Solder
- PCB Component Level Solder
- Electrical/RF Measurement
- Schematics Reading
- Experienced with various Hand tools
- Highly Computer Skilled
- Electronics Assemblies
- Prototype and Board Assembly
- Component Installations
- AC/DC
- Analog/Digital Devices
- Medical/RF Devices
- GMP & GDP
Timeline
Customer Service Technician
Anritsu
04.2023 - Current
Engineering Lab Technician
Apple Inc.
04.2022 - 04.2023
Electro-Mechanical Technician
Gener8
05.2021 - 03.2022
Electronic-Mechanical Assembler
Paramit Corporation
10.2020 - 04.2021
CNC Machine Operator
Paramit Corporation
10.2020 - 04.2021
Electronic Assembler
Terrasat Communications Inc.
07.2019 - 08.2020
Associate of Science - Computer Science And Programming
Merced College
High School Diploma -
Pacheco High School
Similar Profiles
Dragan Titus AdrianDragan Titus Adrian
Presales Solutions Architect (Monitoring Solutions Legacy and 5G) at AnritsuPresales Solutions Architect (Monitoring Solutions Legacy and 5G) at Anritsu
Annacarmen RitotaAnnacarmen Ritota
Project and Quality Administrator at AnritsuProject and Quality Administrator at Anritsu
Joseph McGrathJoseph McGrath
Manufacturing Operations Manager at Azimuth Systems/Anritsu CorpManufacturing Operations Manager at Azimuth Systems/Anritsu Corp