Joy Daco

"Regular of Direct Nicera"

Tape Removal Level4= To remove the pzt's from the tape&to segregate NCO's&pre-dry in preparation for the next process.

PZT Laser Blasting Level4= to roughen the side of the pzt in compliance to the set requirements.

High Temperature Polarization Level4= To gain the required electrical characteristics of the PZT through induction of electricity after heating.

"Tools@Equipment"

1) Drying oven(for tape heating),Jackson G40 polyurethane coated gloves, heating timer, cooling timer, tape removal jig, used film container, used tape container, excess wafer container, wiremesh tray, release liner, sorting foam,canister, plastic scooper, finger cots&paper plate .

2) Machine Dust Collector, Laser Blasting, arrangement jig, metal guide, unloader, vacuum pen,release liner,dummy pzt's and NCO bin

3) Chiller,cooling fan, cooling plate, DC voltage,power supply, Digital multimeter, Digital thermometer, Dummy PZT's, hot plate for polarization, loading stand, magnifier, NCO bin, pallet cleaner, plastic tweezers, polarization jig( flat or round pin), polarization timer for heating,timer for polarization or cooling, unloading foams, unloading stand@vacuum pen.

• Followed daily preventive maintenance schedule for cleaning and lubricating machinery.
• Troubleshot equipment problems to repair or report diagnostics.
• Setup and adjusted machines for daily operations.
• Reduced health and safety risks with strict adherence to safety protocols and PPE requirements.
• Looked through work orders to determine type and quantity of materials needed for each production batch.
• Maintained cleanliness of work area by disposing of waste materials properly according to company policies.

• Sorted product components on work tables to maintain maximum organization and productivity.
• Identified defective parts or components and removed them from production line.
• Helped achieve team goals by rotating production lines and daily duties to meet demand.
• Worked effectively in team environments to make the workplace more productive.
• Provided support and guidance to colleagues to maintain a collaborative work environment.
• Operated a variety of machinery and tools safely and efficiently.
• Reduced health and safety risks with strict adherence to safety protocols and PPE requirements.
• Cleaned up work area at end of shift to maintain safe working environment.

"Agency Buchan"

Cushion Insertion Level 1= To insert the cushion into the harness wire&prepare the harness wire for soldering.

Dot Marking Level 3= To provide model identification& traceability of production lot on the product.

Sponge&Pallet preparation Level1= To clean the bakelite pallet, pallet sheets, sponge Pallet&avoid cross contamination on case.

Silicon Pin Inspection Level 1= To check the silicon on pin.

Tape Removal Level4 = To remove the PZT's from the tape@to segregate NCO's and pre-dry in preparation for the next process.

PZT Laser Blasting Level1= To roughen the side of the PZT in compliance to the set requirements.

" Tool@Equipment"

1) 36pcs.finger cots present consumables bin, 1pladan tray➡️ 30pcs.( Gather all tools& materials needed for the process&arrange to working area.

➡️ Consumables bin

➡️Twisted harness wire

➡️ Cushion (Rubber GBK)

➡️ Finished area

2)Dot marking jig, flatform(optional), ink container, miller mat, marking tool, cotton buds, acetone, finger cots, syringe, marking ink@kim wipes.

3) Cleaning strainer, crate, acetone, brush, cloth, puncher, rubber band(for open type use only), tweezers, carbon mask, exhaust, surgical gloves, cutting guide@case guide.

4)Black finger cots, Digi microscope, toothpick.

5)Drying oven(for tape heating), Jackson G40 polyurethane coated gloves, heating timer, cooling timer, tape Removal jig, used film container, used tape container, excess wafer container,wire mesh tray, release liner, sorting foam, canister, plastic scooper, finger cots@paper plate.

6) Laser Blasting machine, Dust collector, laser blasting arrangement jig, metal guide, unloader, vacuum pen, release liner, dummy pzt's and NCO bin.

"Regular of Direct Nicera"

Tape Removal Level4= To remove the pzt's from the tape&to segregate NCO's&pre-dry in preparation for the next process.

PZT Laser Blasting Level4= to roughen the side of the pzt in compliance to the set requirements.

High Temperature Polarization Level4= To gain the required electrical characteristics of the PZT through induction of electricity after heating.

"Tools@Equipment"

1) Drying oven(for tape heating),Jackson G40 polyurethane coated gloves, heating timer, cooling timer, tape removal jig, used film container, used tape container, excess wafer container, wiremesh tray, release liner, sorting foam,canister, plastic scooper, finger cots&paper plate .

2) Machine Dust Collector, Laser Blasting, arrangement jig, metal guide, unloader, vacuum pen,release liner,dummy pzt's and NCO bin

3) Chiller,cooling fan, cooling plate, DC voltage,power supply, Digital multimeter, Digital thermometer, Dummy PZT's, hot plate for polarization, loading stand, magnifier, NCO bin, pallet cleaner, plastic tweezers, polarization jig( flat or round pin), polarization timer for heating,timer for polarization or cooling, unloading foams, unloading stand and

vacuum pen.