Jonathan Murphy
Conception Bay South,Newfoundland And Labrador
Summary
I am a Journeyman Red Seal Welder with T-Class, S-Class, Flux Core all position CWB tickets, Tig pressure F6 in carbon and Stainless Steel, and also a F3/F4 ticket. I also have a fitting back ground as well.
In the past I work with KKC as there Welding Forman over the B-Cell for the boilermakers on the Hebron project, I have also worked on many offshore projects as a fitter/welder for customers such as FMC, KKC. and Technip. .
Overview
12
12
years of professional experience
Work History
Boilermaker Welder
Pennecon
09.2021 - Current
- building silos, working on hoppers
- Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
- Maintained compliance with all safety procedures from both client and employer.
- Tightened or replaced bolts and gaskets on new flanges.
- Welding on tanks, silos and pressure vessels
- Interpreted blueprints, sketches, and specifications for each job.
- Used hand signals to notify crane operator to lift components to specific positions.
Welder
Liburdi Automation Inc.
03.2020 - 05.2021
- Robot welding on submarines
- CWB all position Mig welding
- All welding tested with x-ray or U.T.
- Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
- Demonstrated versatility in various welding methods including MIG, Stick, and Flux Core Welding techniques.
- Fabricated shop parts directly from blueprints.
- Inspected welds and checked critical measurements to meet specifications.
- Prepared welding equipment to perform advanced welding work.
Welder
Pennecon
11.2019 - 12.2019
- Inspected welds and checked critical measurements to meet specifications.
- Welding under ASME code F3F4 pressure welding on tanks
- Tank Building
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Prepared welding equipment to perform advanced welding work.
- Assisted in blueprint reading and interpretation for accurate alignment of parts during assembly process.
Welder
Liburdi Automation Inc
10.2019 - 11.2019
- Robot welding on submarine's
- CWB MIG welding all positions
- All welding tested with x-ray or U.T
- Inspected welds and checked critical measurements to meet specifications.
- Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
Welder/Fabrication Welder
Cahill
08.2019 - 09.2019
- CWB Flux Core all position
- CWB T-Class welding
- ASME F3F4 welding
- Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
- Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
- Fabricated shop parts directly from blueprints.
- Inspected welds and checked critical measurements to meet specifications.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
- Used cutting torches to shape and cut metal for fabrication projects.
Welder
Liburdi Automation Inc
09.2018 - 03.2019
- Robot welding
- CWB MIG welding all position
- All weld's test with x-ray or U.T
- Inspected welds and checked critical measurements to meet specifications.
Welder
DFB Driver
06.2017 - 07.2018
- Welded in all positions.
- Welding/fitting different parts that would break done from time to time
- Tank repairs
- Gouging
Welder
Canadian Process Services ING
10.2016 - 11.2016
- Welding repairs on penstocks
- Welded in all positions.
- All welds tested
- Robot welding
- Inspected welds and checked critical measurements to meet specifications.
Welder
Rothlochston VEL. LTD,
07.2016 - 09.2016
- Welded in flat, horizontal, vertical, and overhead positions.
- Welding 2-8 inch stainless pipe
- Welding CWB T-Class
- Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
Welder
DFB Driver
03.2016 - 07.2016
- Working on building 226, building the cells
- Welding CWB T-Class
- Fabricated shop parts directly from blueprints.
- Inspected welds and checked critical measurements to meet specifications.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
Welder Foreman
Hebron KKC
02.2015 - 12.2015
- Conducted routine inspections of welding equipment, maintaining optimal performance levels and minimizing downtime.
- Maintained thorough documentation of project progress, ensuring transparency between management and stakeholders.
- Balanced workload distribution among welders while maintaining high-quality output levels throughout each project phase.
- Inspected welds and checked critical measurements to meet specifications.
- Interpreted verbal and written instructions from work orders and welding blueprints.
Welder/Fabrication Welder
Metal World
09.2012 - 11.2014
- While working for Metal World, I played a key role as a fitter in many offshore and subsea projects. After everything was fitted together, I would also weld when needed. (Flux Core all position)
- Building new and repairing older Sea containers, garbage bins
- FMC – Hibernia expansion project phase 1 and 2 (fitter/welder)
- KKC – Hebron skirt project for the GPS platform (fitter/welder)
- Technip - White Rose subsea expansion project (fitter/welder)
Education
Redseal Welder - Welder
Nait
Edmonton, AB10.2010
Skills
- Oxy-Fuel Cutting
- CWB T-Class
- CWB Flux Core all position
- AMSE F6 Tig Stainless
- AMSE F5 Stick Stainless
- AMSE F6 Tig Carbon
- AMSE F3F4 Carbon Tig root, 7018 fill and cap
- Fall Protection
- Confined Space
- WHIMIS
- CSTS (Construction Safety Training System)
- Rigging
- power line hazards certificate
Languages
English
Timeline
Boilermaker Welder
Pennecon
09.2021 - Current
Welder
Liburdi Automation Inc.
03.2020 - 05.2021
Welder
Pennecon
11.2019 - 12.2019
Welder
Liburdi Automation Inc
10.2019 - 11.2019
Welder/Fabrication Welder
Cahill
08.2019 - 09.2019
Welder
Liburdi Automation Inc
09.2018 - 03.2019
Welder
DFB Driver
06.2017 - 07.2018
Welder
Canadian Process Services ING
10.2016 - 11.2016
Welder
Rothlochston VEL. LTD,
07.2016 - 09.2016
Welder
DFB Driver
03.2016 - 07.2016
Welder Foreman
Hebron KKC
02.2015 - 12.2015
Welder/Fabrication Welder
Metal World
09.2012 - 11.2014
Redseal Welder - Welder
Nait
Similar Profiles
Martha CanoMartha Cano
Four Year Apprentice Constrution/Four Year Apprentice Industrial Electrician at Pennecon Tecnical Services /Pennecon Industries LtFour Year Apprentice Constrution/Four Year Apprentice Industrial Electrician at Pennecon Tecnical Services /Pennecon Industries Lt
Shawn FillierShawn Fillier
Winch/marine pump operator at SNC Lavalin-Dragados-Pennecon-Argentia, NLWinch/marine pump operator at SNC Lavalin-Dragados-Pennecon-Argentia, NL
Christopher LundriganChristopher Lundrigan
Field Engineering Lead at Pennecon IndustrialField Engineering Lead at Pennecon Industrial
Stephanie Corbett-SampleStephanie Corbett-Sample
Reading Specialist/Instructional Resource Teacher at NLESDReading Specialist/Instructional Resource Teacher at NLESD
Roger PettenRoger Petten
Cook Manager at ShenanigansCook Manager at Shenanigans