Gage Eresman

• Finish hoe/dozer and grader for a tank farm on hwy 63 (tc energy)
• Cut ditches, slopes
• Stripped topsoil with less than 3% contamination
• Load trucks
• Fuel and grease machines

Cat D6T, D8T, D10T, JD 950 GPS, JD 1050, Komatsu 650 (7500-8000hrs)

• Read grade stakes effectively for cut/fill
• Completed areas for reclamation within tolerance
• Build roads, and road slopes (mainly 3:1) using spread cat method, created crown
• Stripped topsoil, as well as replaced after cut or fill was finished
• Differentiated between soil types when stripping by visual examination
• Finish dozer hand for all projects

Cat 349, JD 250, JD 470, JD 870, Volvo 480 (3500-4000 hours total)

• Stripped skeg with 0.05% mix tolerance
• Loaded triples and wiggles
• Kept cut floor clean through entire cut.

Cat 14h, 14m, and 16m (2000hrs)

• Maintained haul roads for haul trucks
• Maintained access roads
• Cleared snow and spread sand in winter months
• Finished pads for sign off to client

Cat D6T, D6N, D8T, D9T, D10N, D10T (2500-2600hrs)

• Read grade stakes effectively for cut/fill
• Cut benches and berms into pads at solar locations
• Build roads, and road slopes (mainly 3:1) using spread cat method, created crown
• Stripped topsoil, as well as replaced after cut or fill was finished
• Ripped frozen ground for easier removal with buggy
• Push cat for 21s, and 31s

Cat302, 323, 352 (110 hours total)

• Cut irrigation trench(single)
• Placed rock around culvert
• Used skeleton bucket to filter out larger rocks for dirt placement in trench
• Loaded 745 haul truck from cut pad