Caleb Lawrence-Bookman
Bruce Mines,ON
Summary
Construction worker with 3 years of experience a well as a background in wind, aggregate mining, environmental tech and arborist work. Worked in a close motivated team that strived to teach one another new techniques and skills. Quickly learned the processes of tasks and would be given charge of teams to complete said tasks. Most work has been contract for an X amount of time and now looking for a full time position.
Overview
3
3
years of professional experience
1
1
Certification
Work History
Wind Worker
Borea Construction
07.2023 - 10.2023
- Instructed and trained workers on proper turbine installation procedures
- Kept radio contact with crane operators and taglines to direct turbine parts
- Performed quality checks on installed turbine parts
- Cleaned and straightened work areas to maximize productivity and safety
- Prepped proper tooling for turbine parts before they are lifted
- Operated telehandler to load and off load equipment
- Install and take down of rigging from turbine parts
- Take down of equipments after turbine parts are installed
- Performed equipment test to check for defects before hoisted
- Troubleshoot problems up tower
- Operated telehandler to load and off load equipment
- Talk about tasks with team members before attempting said tasks
- Improved team morale and productivity through effective communication and active listening
- Collaborated with cross-functional teams to ensure project success, resulting in improved workflow efficiency
- Followed safety guide lines in place
- Quality checked parts for damage or defects before hoisted
Wind Worker
Borea Construction
03.2023 - 07.2023
- Worked fast and efficiently to complete tasks and meet daily deadlines
- Loaded, unloaded, and moved material to and from storage and production areas
- Followed instructions and procedures to complete assigned tasks
- Installed turbine parts as they where hoisted in
- Quality checked turbine parts installed
- Performed general housekeeping and cleaning tasks
- Use of high torque and hydraulic tools
- Ensured proper equipment was at site
- Operated telehandler to move dead man blocks and garbage to located areas
- Operated Ematec RBC-D to angle and detach from parts hoisted
- Quality checked equipment for defects
- Creatively troubleshooted problem that arose well up tower
Wind Turbine Technician
Borea Construction
11.2022 - 02.2023
- Climbed wind turbine towers to inspect, troubleshoot and repair turbine equipment
- Prepared turbine sections to be installed
- Organized proper tooling for sections of turbine to be installed
- Set up of delineator around parts, hazards, and lifting zones
- Followed safety protocols and participated in practices
- Operated telehandler to take parts out of storage
- Tag lined turbine parts as they where hoisted
- Drove to and from work in a company truck
- Examined tool and equipment for defects
Operator
Golbertson Inc
07.2022 - 10.2022
- Operated 980 loader, forklifts and other industrial vehicles to transport equipment and products
- Signal operators to lift, move, or steer well doing complex tasks
- Maintained knowledge of industry policies and procedures to set up and operate equipment safely
- Repair of machinery to working conditions
- Practice of using power tools and welding machine
- Create test pads and sampled them to ensure quality
- Inspected equipment for problems of concern
- Regulatory maintenance of equipment completed daily
- Set up and take downs of site equipment
Wind Turbine Technician
CSS Wind
04.2022 - 07.2022
- Repair of lightning damage and ware on turbine blades
- Use of grinder to rid un-wanted fiber glass so new layers can be placed
- Use of rope basket to work on out side of blade
- Communicated between co-workers on mixing time for resin and layers of fiber glass to be placed
- Experienced in driving multiple provinces and navigating of cites to reach new work locations
Laborer
Wright Tree Services
10.2021 - 04.2022
- Proper placement for tree cutting experience
- Performed maintenance on chain saws and brush saws
- Practice safe distance well working around chain saws and brush saws
- Experience in set up and operation of clamp saw in tight residential areas
- Experience in set up on TCP to regulations
- Daily safety meetings for areas of concern and tasks
- Safe tree felling practice well in bucket
- Proper approach of power lines well cutting and clearing brush
- Proper use of chain saws and brush saws
- Safe use of chipper to clear brush in designated areas
- Troubleshoot problems that arose with saws and chippers
- Drove company vehicle to and from work sites across canada
Feild Service Technician
Canadian Space Services
05.2021 - 09.2021
- Asses and maintain radome and tower
- Re-caulked outer ring of radome to ensure seal
- Repaired holes in radome to speciations
- Torque, tightened, and marked bolts to required standards
- Placed sealant to outer side of radome to increase weather resistance and life span of panels
- Increased customer satisfaction by providing prompt and efficient on-site support for technical issues.
- Organized equipment to ensure easy use
- Troubleshooted problems that arose well in radome
- Kept cleanliness of sites and equipment
- Directing crane well in basket to access outer side of radome
- Performed quality check of equipment to ensure safe use.
- Calibrated with costumer about tasks to be completed
- Drove company vehicle across Canada
- Traveled on short notice across Canada
Screener
Tomlinson
02.2021 - 05.2021
- Inspected and replaced screens in rock dividers
- Inspected and replaced belts/rollers that where un-useable
- Insured proper and efficient operation of screens and related equipment in order to meet production needs
- Disassembled and installed designated screens to meet per designated orders
- Worked as a team to meet deadlines or short notice problems
- Ensured proper torque well working on equipment
- Disposed of harmful liquids in designated area
- Use of LOTO to ensure safety well working on equipment
- Use of acetylene torch to cut metal for guard
- Supervised welding of blocks for guards to screen
Education
Degree - Environmental Technician
Cambrian College
Greater Sudbury, ON05.2020
High School Diploma -
Central Algoma Secondary School
Desbarats, ON06.2018
Skills
- Reliable
- Mechanically inclined
- Critical thinking
- Excellent communication
- Well mannered
- Strong work ethic
- Quick learner
Certification
- Fall protection working ( Working at hights awarness)
- Confined space safety training
- First aid
- CSTS (WHIMS)
- Electrical Safety Awareness
- 4 steps to Workers Health and Safety Awareness
- Chainsaw Safety Training Certificate
- High angle rescue
- Respirator Fit Test 3m,6800 Full face mask
- Telehandler
- Ematec RBC-D
- Boater license
Timeline
Wind Worker
Borea Construction
07.2023 - 10.2023
Wind Worker
Borea Construction
03.2023 - 07.2023
Wind Turbine Technician
Borea Construction
11.2022 - 02.2023
Operator
Golbertson Inc
07.2022 - 10.2022
Wind Turbine Technician
CSS Wind
04.2022 - 07.2022
Laborer
Wright Tree Services
10.2021 - 04.2022
Feild Service Technician
Canadian Space Services
05.2021 - 09.2021
Screener
Tomlinson
02.2021 - 05.2021
Degree - Environmental Technician
Cambrian College
High School Diploma -
Central Algoma Secondary School
Similar Profiles
Michael stromMichael strom
Labourer (Wind Worker) at Borea ConstructionLabourer (Wind Worker) at Borea Construction
Cora-Lee HolteenCora-Lee Holteen
Wind Turbine Technician at Borea ConstructionWind Turbine Technician at Borea Construction
Linton MereuLinton Mereu
Assistant Superintendent at Borea ConstructionAssistant Superintendent at Borea Construction
Laurie Anne DubeLaurie Anne Dube
Inventory Coordinator at Borea ConstructionInventory Coordinator at Borea Construction
Joseph HunterJoseph Hunter
JOB TiTLES:Yard Worker, Dog Sitter, Cadets at EMPLOYER: Bruce Pitmen, Neil DuguayJOB TiTLES:Yard Worker, Dog Sitter, Cadets at EMPLOYER: Bruce Pitmen, Neil Duguay