Eduardo Garciano
Calgary,AB
Summary
Resourceful Journeyman Electrician recognized for efficiency in troubleshooting, diagnosing and repairing HVAC systems. Decent time management, communication and multitasking abilities paired with proficiency in installation operations. Customer-focused professional with 10 -year accident free history.
Proven international experience in spiral pipe manufacturing industry for design, build, operate and transfer scheme of spiral pipe mills and its ancillary equipment installed in India, Indonesia, Philippines, Malaysia, Thailand and Saudi Arabia. Fifteen (15) solid years of experience in installation, commissioning, maintenance, machine upgrade, modification and operation which is electro-mechanical by nature, acquired multi trade skills as electrician, mechanic and hydraulics installer.
Proficient in oral and written communication in English.
Strong multi-tasking abilities in a fast paced environment.
Work effectively both individually and as part of a team.
Energetic, patient and result oriented professional..
Overview
18
18
years of professional experience
Work History
HVAC, Journeyman Electrician Tester/Service Technician
Ice Western Sales Ltd.
06.2017 - Current
- Require to start - up and commissioning of units in shop.
- Test electrical circuits and equipment such as electrical controls and panel boxes , splice, join and connect wires, test and measure voltage, loads, ground faults, integrity of circuits, troubleshoot and isolate faults.
- Perform functional tests as per sequence of operations.
- Read blue prints, wiring diagrams, piping schemes and engineering specifications to diagnose, troubleshoot and repair units.
- Analyze, diagnose and resolve problems in timely manner.
- Notice potential problems to prevent premature and unexpected breakdowns or callback.
- Complete paperwork for Factory Acceptance Test (FAT) Reports.
- Performed layouts and install electrical components correctly.
- Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
- Required to go start-up and service if service technicians are not available ( For emergency situation ONLY).
- Required to work on natural gas or propane Heating commissioning on HVAC unit.
- Notify Electrical Supervisor of faulty parts and major issues requiring Engineering involvement.
- Perform mark ups with red pen on drawings to identify changes made to equipment.
- Prepare for QA/QC inspection spearheaded by Electrical Supervisor.
- Clean, organize and remove garbage from testing area throughout the day.
- Follow company safety regulations when completing all work and ensure team members will strictly follow company safety requirements.
- Takes on additional responsibilities as assigned by Production Manager and Electrical Supervisor.
Logistics Technician
AGAT LABORATORIES LTD
11.2011 - 03.2022
- Responsible to log, assign and track various environmental samples for laboratory analyses using laboratory information management system (LIMS) software. Sample that is soil, oil, gas, air and water by nature coming from clients across Canada.
- Assigned analyses and price codes based on client requirements and distribute samples to specific laboratory sections to perform test specified in chain of custody.
- Picked-up samples at airport for samples coming by air transit.
- Built and established relationships with staff and vendors.
- Maintained excellent working relationships with customers by efficiently responding to inquiries and complaints.
- Performed sample preparation and sub-sample for testing purposes.
- Performed sample disposal in accordance with Calgary Environmental guidelines.
- Perform other duties that the company may require to do so.
HVAC Tester/ Electrical Assembler
Southampton Industrial Manufacturing
07.2014 - 03.2017
- Review and interpret schematics, drawings, and blueprints to assemble and install electrical wiring, cabling and electrical components for Heating, Ventilation and Air Conditioning (HVAC) units.
- Obtain required parts from Electrical Supervisor
- Work with Control Systems Lead Engineer to test equipment operation under varying inputs and conditions.
- Perform airflow measurements and verify that it is above the airflow as per general arrangement drawing.
- Verify PLC inputs and outputs.
- Perform functional tests as per sequence of operations and functional test reports.
- Complete paperwork for Factory Acceptance Test (FAT) Reports.
- Perform troubleshooting on equipment when operational issues arise.
- Notify Electrical Supervisor of faulty parts and major issues requiring Engineering involvement.
- Maintain knowledge of programming languages.
- Take courses to lean and develop skills in new programming languages.
- Perform mark ups with red pen on drawings to identify changes made to equipment.
- Prepare for QA/QC inspection spearheaded by Electrical Supervisor.
- Clean and organize and remove garbage from testing area throughout the day.
- Follow company safety regulations when completing all work and ensure team members will strictly follow company safety requirements.
- Takes on additional responsibilities as assigned by Production Manager and Electrical Supervisor.
- Perform all duties with the requirements of the ISO 9001: 2015 Quality Management System.
Electrical Assembler
Engineered Air ( Airtex Mfg Partnership )
01.2013 - 07.2014
- Review project submittal and interpret drawings ,schematics, wiring diagram and blueprints to assemble and install electrical wiring, cabling and electrical components for Heat, Ventilation and Air Conditioning (HVAC) units.
- Signed out electrical parts and components from Parts Department based on Bill Of Materials (BOM).
- Build and perform wiring of power and control panelboards for HVAC units.
- Notify the Electrical Foreman for faulty parts and installation issues that requires designer involvement.
- Identified and corrected defects to bring completed products in line with tolerances.
- Perform power cable laying, termination of wires and cables for fan blower motors, damper actuators, condenser fans, refrigeration compressors.
- Perform control wire termination for ignition control (gas fired heaters), electric heater controls and refrigeration controls.
- Perform conduit piping installation for wire ways in Rigid Steel Conduit (RSC), Rigid Aluminum Conduit ( RAC) and Electrical Metallic Tubing ( EMT).
- Perform point to point verification to ensure correct wiring from power and control panelboards to individual motor drives, equipment, instruments and devices.
- Follow company safety regulations in the performance of all works assigned.
- Keep clean , organized and removed all garbage from workshop area throughout the whole shift.
- Perform other duties that the company requires to do so.
Production Technician
Advanced Orthomolecular Research
02.2012 - 01.2013
- Responsible for proper operation of encapsulation machine to avoid workplace hazards or injuries.
- Set up and adjusted machines for day-to-day operations.
- Weighed and measured items to prevent waste and meet quality standards.
- Supported production needs by performing routine tasks using standard procedures and equipment.
- Inspected final products to assess compliance with quality standards and established tolerances.
- Maintained machinery to prevent overloads and avoid malfunctions.
- Participated in training sessions to enhance skills and knowledge.
- Demonstrated proper use of equipment to newly hired employees to avoid workplace injuries.
- Perform sanitization of clean room and check safety issues of machine.
- Perform other task as company require to do so.
Maintenance Engineer/Technical Support Engineer
Group Five Pipe Saudi
07.2005 - 10.2011
- Primary duty is to maintain all equipment machinery and plant facilities in good running condition at all times
- Reduce or minimize downtime encountered during plant operation to save operational cost crucial to production efficiency output
- Takes part in preparing conventional or computer-assisted design (CAD) engineering designs, drawings and specifications
- Perform limited range of mechanical tests and analyses of machines, components and materials
- May assists in inspection of mechanical installations and construction projects
- Participate in installation, repair and maintenance of machinery and equipment
- Collect information and secure database for spare parts and components of all equipment and tooling, machinery, plant facilities and infrastructure
- Create comprehensive compilation of machine design and manuals and make master list of all plant machinery, tooling and properties for easy identification during physical inventory to determine the condition whether it is still operational, needs rehabilitation, upgrading or salvaged when it is beyond usefulness and costly to maintain
- Implement maintenance program as guide to keep plant machinery in healthy condition and assure worthiness to operate during the whole project duration
- Approved and disapproved materials requisition from subordinates pertaining to maintenance related requirements
- Recommend to Department Head in acquiring new machines and equipment based on technical requirements and suitability of purpose
- Execute modification works for machine upgrading with approval of Maintenance Department Head or Plant Manager
- Perform machine troubleshooting when required whether for machine repair or production operation problem pertaining to machine performance limitations
- Plan, estimate, and execute in –house fabrication works, or locally manufactured machine and equipment
- Perform evaluation on maintenance crew skills as well as On-the –Job trainee (OJT) and improve deficient areas through proper training on specific areas of discipline
- Main objective is to make each crew productive and proactive for each job assigned
- Perform other related job duties and functions that the company may require to do so
- Reports directly to Maintenance Department Head.
Education
Certified Red Seal Journeyman Electrician
Southern Alberta Institute of Technology
Calgary, AB06.2022
Bachelor of Science in Electrical Engineering
University of San Jose- Recoletos
Cebu10.1988
Skills
- Commercial and Industrial Electrician
- Blueprints and Schematics
- Electrical Installations and Schematics
- Knowledge of Canadian Electrical Code (CEC 2021)
- Conduit and Pipe Laying
- Variable Frequency Drives (VFDs) programming ( Danfoss , Lenze)
- Programmable Logic Controllers (PLCs) Block Diagram and Ladder Logic ( Distech, Allen Bradley )
- Relays and Pressure Switches
- Control Circuit Troubleshooting
- Machine Maintenance and Repair
Timeline
HVAC, Journeyman Electrician Tester/Service Technician
Ice Western Sales Ltd.
06.2017 - Current
HVAC Tester/ Electrical Assembler
Southampton Industrial Manufacturing
07.2014 - 03.2017
Electrical Assembler
Engineered Air ( Airtex Mfg Partnership )
01.2013 - 07.2014
Production Technician
Advanced Orthomolecular Research
02.2012 - 01.2013
Logistics Technician
AGAT LABORATORIES LTD
11.2011 - 03.2022
Maintenance Engineer/Technical Support Engineer
Group Five Pipe Saudi
07.2005 - 10.2011
Certified Red Seal Journeyman Electrician
Southern Alberta Institute of Technology
Bachelor of Science in Electrical Engineering
University of San Jose- Recoletos
Similar Profiles
Isaac HallIsaac Hall
Fishing/Ice Cream Store Manager at Mountaineer Country Ice Cream And Gun SalesFishing/Ice Cream Store Manager at Mountaineer Country Ice Cream And Gun Sales
Paul HalePaul Hale
Refrigeration and Air Conditioning Technician at Ice Marketing & Machine Sales/Rentals (Aust)Refrigeration and Air Conditioning Technician at Ice Marketing & Machine Sales/Rentals (Aust)
Michael FernandezMichael Fernandez
Territory Account Manager at Mega Western SalesTerritory Account Manager at Mega Western Sales