ED Perpituo TURA
Balamban
Summary
Seasoned welder and fabricator with over 13 years of experience in diverse sectors, including plant industries and shipbuilding. Expertise in FCAW, GMAW, and SMAW welding techniques, combined with a strong commitment to quality and safety in all welds. Proficient in conducting thorough weld inspections to ensure compliance with industry standards. A proven track record of consistently delivering high-quality work within strict timelines demonstrates reliability and dedication to excellence.
Overview
24
24
years of professional experience
1
1
Certification
Work History
Welder / Fabricator
QUEBEC INC.- MOREAU
03.2021 - Current
- Read and interpret technical drawings and blueprint.
- Performing high quality welding based on drawings and fabrication work to specification using (FCAW/SMAW/GMAW). Perform weld on High Pressure Piping’s using SMAW process.
- Carry out fabrication jobs and full welding on various projects like structural components, Piping’s, Pipe fittings, guide rails, machine protector, machineries frames or housing, piping’s support, electrical support, ducting support braces & etc.
- Execute re-plating & weld on reservoir and tank using SMAW, FCAW and GMAW process.
- Repair on leaks and cracks for restoration at plant machineries and equipment’s with different materials including stainless steel, carbon steel and alloys.
- Conduct inspections and test on welds to ensure compliance with safety and quality standard.
- Erection and assembling of pre-fabricated system.
- Perform rigging & lifting of equipment and parts by cranes or any lifting equipment.
- Maintaining a safe and organised work environment, following all relevant safety procedures.
- Industry: Construction
Welder / Fabricator
AUSTAL Philippines
10.2018 - 10.2019
- Read & interpret blueprints/drawing plan.
- Task to perform welding using Gas Metal Arc Welding Process in aluminum.
- Fabricating and welding of seam line, coupled plate, side sheet and planking sheet, brackets, column and stiffener varying from 3mm T- 50mm Thick of aluminum plate.
- Perform step by step process in welding the seam line upon checking the alignment is correct, and ensure to install a strong back & running plate at the back to avoid bending/buckle of plates during and after welding. Weld in T-Bars at plate sheet in stitched procedures.
- Identify and repair defects in welds as necessary.
- Responsible to couple plates, side sheet & planking sheets which involve lay-outing, marking for reference and checking the squareness, desired gap, level plate sheets then tack weld. Install also strong back if needed.
- Installing T-bars to plate and planking sheet. Lay-out, marking and cutting.
- Bracket installation basing drawing plan knowing a type of bracket to be installed in the unit.
- Housekeeping and organized tools after every shift.
- Industry: Aluminum Ship Building Industries
Semi-Automatic Welder / FCAW Welder
Otakeyama Kogyosho
09.2014 - 08.2017
- Responsible for full welding at seam line to be couple from one block to another to be joined and including weld on brackets, braces, riders, girder and stiffener using FCAW & GMAW Process. Doing step by step process following by welding procedure.
- Performing weld with gap using ceramic backing tapes (back up) for root pass/penetration until final capping.
- Perform weld on piping’s, flanges, ducting/ventilators, wiring support, lifting eye and railings.
- Task for X-Ray welding at joints and in welding areas to be undergone Non-Destructive Examination for RT, UT, PT and Leak Test.
- Perform all welding position and different angle in inclined position and in all types of weld and joint.
- Responsible for repair in welding defects using gouging process, grinding and welding using FCAW or SMAW process.
- Repairing misalignment if occur before welding.
- Final visual check/self-inspection after leaving the area. Repair immediately if found a defect.
- Cleaning the area after a day of work.
- Industry: Ship Building Industries
Senior Technician Welder
KEMPE Engineering Qatar WLL.
03.2011 - 02.2013
- Carry out welding task based on drawings.
- Cutting and bevel round solid metal bar with 160mm diameter.
- Fit-up and weld metal bar using GMAW in all position.
- Weld using SMAW/GMAW/FCAW process.
- Gouging and gas cut operation.
- Operating and assisting in hydraulic bending press operation.
- Operate overhead cranes and fork lift.
- Industry: Aluminum Smelting Plant (QATALUM)
Semi-Automatic Arc Welder / FCAW Welder
AJD Steel Fabrication and BALCOMPCO Steel Fabrication
06.2001 - 06.2004
- Task in full welding using Flux Cored Arc Welding Process at any joint in assembled unit and erected blocks at any part of the vessel at different types of weld and joint. Also encountered all types of welding positions. Using FCAW at 1.2mm in diameter filler wire.
- Responsible for full welding at seam line and including weld on brackets, braces, riders, girder and stiffener using FCAW & GMAW Process. Doing step by step process following by welding procedure.
- We used welding straight backing tapes (ceramic back up) for root pass/penetration in butt welding with gap at seam line, and curve back up ceramics for radius butt joint.
- Responsible for repair welding defects using gouging after welding using SMAW process.
- Can weld multiple pass to form a layer depending on a dimension of gap ang bevel.
- Self-inspection to my designated area and repair immediately if found any defects.
- Cleaning the area after day work.
- Industry: Ship Building Industries
Education
Bachelor of Science - Mechanical Engineering
Cebu Technological University
03-2009
Course - Sheilded Metal Arc Welding
Tech. Education & Skills Dev. Authority
Ilihan, Toledo City Cebu06.2001
Skills
- Attention to detail
- Fabrication
- Blueprint reading
- Welding
Languages
English
French
Japanese
Certification
- SMAW 6G Licensed – Examiner: CWB
- FCAW Certified – Examiner: CWB Certified CSA Standard W47.1
- MIG Licensed in Aluminum – Examiner: DNVGL (WPS No. - 032-1)
- FCAW A3Z Licensed – Examiner: Nippon Kaiji Kyokai (NK) Certificate No. – WE16HS0256
- SMAW NC1 Licensed in TESDA – (Certificate No.: 14070201004349)
Timeline
Welder / Fabricator
QUEBEC INC.- MOREAU
03.2021 - Current
Welder / Fabricator
AUSTAL Philippines
10.2018 - 10.2019
Semi-Automatic Welder / FCAW Welder
Otakeyama Kogyosho
09.2014 - 08.2017
Senior Technician Welder
KEMPE Engineering Qatar WLL.
03.2011 - 02.2013
Semi-Automatic Arc Welder / FCAW Welder
AJD Steel Fabrication and BALCOMPCO Steel Fabrication
06.2001 - 06.2004
Bachelor of Science - Mechanical Engineering
Cebu Technological University
Course - Sheilded Metal Arc Welding
Tech. Education & Skills Dev. Authority
Training
- ASP Construction (Health and Safety on Construction Sites Course)
- Confine Space, Work at height and Hot work Training Seminar
- Scissor Lift platform, Fork Lift, Overhead Crane, wheel-type aerial work platform Training & Seminar
- Safe Sky Master Operation Seminar
- Safe Crane Rigging Operation Seminar
Materials/Tools/Equipment Used
- Welding electrode & Filler Wire: E6011, E6012, E6013, E7018, E308-15, ER70S-6, E71T-1C, Gouging Rod & arc air.
- Impact Drive, Hammer Drill, Magnetic Drill, Jig Saw, Electric Drill
- Welding Ceramics Backing Tape and Backing Plate.
- Meter ruler, Steel Tape, L-square, Laser, Spirit level, Wrenches, Pneumatic and Electric Angle grinder (small, big), Grinding disc, cutting disc and Pencil Grinder, miller, jig saw, circular saw and router.
- Chain block, Ratchet/come-along, chipping hammer, Hammer, Pliers, Long Nose Cutter, Steel Brush, Cup Brush and Wheel Brush
- Radial Cutting machine, Manual Plasma Cutter, Cutting Torch, Heating torch in Oxy-acetylene Gas. Gas Used: CO2, Argon/CO2 Mixture & 100% Argon
- Electric welding machine, Gouging machine, Engine motor generator and Portable welding machine
- Personal Protective Equipment: Welding mask, long sleeve shirt, Welding Apron, Safety shoes, Goggles, Gas mask, Welding gloves, Leather Sleeve, Leather jacket, Earplug and Safety Harness.
PERSONAL PARTICULARS
- Age: 43
- Date of Birth: April 8, 1982
- Citizenship: Filipino
- Gender: Male
- Height: 5’5”
- Marital Status: Married
- Passport Number: P0569196B
- Date of Issue: 2019-02-07
- Expiry Date: 2029-02-06
Similar Profiles
Bradley HughesBradley Hughes
Physical Therapy Technician at Moreau Physical TherapyPhysical Therapy Technician at Moreau Physical Therapy
Jolie PouletJolie Poulet
Varsity High School Soccer Coach at Moreau Catholic High SchoolVarsity High School Soccer Coach at Moreau Catholic High School
Kayla MattisonKayla Mattison
Childcare Provider at Moreau Community CenterChildcare Provider at Moreau Community Center
GLENN RAMOSGLENN RAMOS
Second Engineer at Wilhelmsen-Smith Bell ManningSecond Engineer at Wilhelmsen-Smith Bell Manning
Christian Dane A. TawiChristian Dane A. Tawi
Affiliate Marketer at Self-employedAffiliate Marketer at Self-employed