Dennis Kollen
Chilliwack,BC
Overview
14
14
years of professional experience
Work History
Commissioning General Forman
FCCL
10.2024 - Current
- Worked alongside team to accomplish work goals according to schedule.
- Improved project efficiency by effectively delegating tasks and managing a team of skilled workers.
- Kept teams properly supplied with materials, tools, plans and supplementary assistance to meet project deadlines.
- Planned each job with appropriate safety measures, addressing weight limits and fall protection.
- Performed job safety analysis on daily basis to mitigate risks for all workers and visitors to job sites.
Compressor Piping General Forman
FCCL
11.2023 - 10.2024
- Mentored junior workers to improve their skills and knowledge, contributing to a higher-quality workforce on each project.
- Developed comprehensive work plans that outlined the required tasks, resources, and timelines for efficient project execution.
- Devised and implemented safety protocols to reduce risks on construction and extraction sites.
- Prepared and submitted reports on job progress and safety conditions to upper management.
- Oversaw daily operations at site, keeping team production moving at optimal pace.
Closure Welds General Forman
FCCL
05.2023 - 11.2023
- Ordered necessary supplies and materials required for installation of new work and remodeling of existing systems.
- Worked alongside team to accomplish work goals according to schedule.
- Optimized resource allocation for increased productivity by closely monitoring project progress and adjusting schedules as needed.
- Performed job safety analysis on daily basis to mitigate risks for all workers and visitors to job sites.
- Enhanced job site safety through regular inspections, hazard assessment, and implementation of corrective measures.
Closure Weld Forman
FCCL
09.2022 - 05.2023
- Trained new employees to learn new systems, apply best practices and comply with protocols and regulations.
- Checked equipment to determine if maintenance was required.
- Reviewed project details to specify correct materials and equipment for job sites.
- Collaborated with project managers in planning stages, advising on schedule adjustments and potential obstacles.
- Inspected completed work to verify quality standards and compliance with criteria.
- Raised overall crew proficiency with ongoing skill development initiatives targeting areas identified for improvement.
Undergrounds Piping Forman
FCCL
03.2022 - 09.2022
- Maintained cost-effective inventory of spare parts to help achieve production goals.
- Ensured safety compliance through regular inspections of tools and equipment, conducting toolbox talks, and enforcing company policies.
- Assisted in resolving technical issues that arose during construction projects by applying extensive knowledge of industry standards, codes, and regulations.
- Oversaw daily operations at site, keeping team production moving at optimal pace.
Undergrounds Pipefitter
FCCL
03.2021 - 03.2022
- Fabricated and installed GRE, HDPE and carbon steel piping undergrounds.
- Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
- Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
- Followed safe work practices, which included fall protection and personal protective equipment.
Pipefitter
Brymark
10.2020 - 03.2021
- Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
- Threaded pipes using piping machines.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Fabricated and installed screw pipe, socket weld pipe, victaulic connections and stainless steel tubing.
Pipefitter
CIMS
08.2020 - 10.2020
- Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
Pipefitter Forman
Newco Fabrication
04.2020 - 08.2020
- Performed quality assurance checks regularly identifying potential issues early allowing for swift corrective action minimizing negative impacts on overall timelines.
- Ensured timely completion of projects by monitoring progress, addressing delays, and adjusting resources as needed.
- Enhanced safety measures by conducting regular inspections of tools, equipment, and work areas.
- Mentored junior team members providing guidance, support, and sharing expertise to ensure their growth within the profession successfully progressed over time.
Pipefitter
Lorneville
01.2020 - 04.2020
- Followed safe work practices, which included fall protection and personal protective equipment.
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
Pipefitter Forman
Newco Fabrication
07.2019 - 12.2019
- Performed quality assurance checks regularly identifying potential issues early allowing for swift corrective action minimizing negative impacts on overall timelines.
- Ensured timely completion of projects by monitoring progress, addressing delays, and adjusting resources as needed.
- Enhanced safety measures by conducting regular inspections of tools, equipment, and work areas.
- Mentored junior team members providing guidance, support, and sharing expertise to ensure their growth within the profession successfully progressed over time.
Pipefitter
Sinco
02.2019 - 07.2019
- Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
- Installed new systems and connected piping to existing components by welding, bolting and threading.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
- Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
Pipefitter Leadman
Newco Fabrication
05.2014 - 02.2019
- Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
- Daily use of grinders, torch, plasma and grooving machine to prepare pipe ends for fit up.
- Measured, threaded, and cut materials to correct angles.
- Planned pipe system layout, installation and repair according to specifications.
Pipefitter Helper
SK Tech
06.2010 - 11.2016
- Followed safe work practices, which included fall protection and personal protective equipment.
- Set sleeves or inserts to provide support for pipes.
- Ensured proper alignment of pipes through precise leveling and positioning during installation processes.
- Measured, cut, threaded and assembled new pipe to place assembled pipe in hangers or other supports.
- On and off plant shutdown work at multiple hydro dams in remote areas including Squamish, Pemberton and Queen Charlotte Islands.
Pipefitter
Allied Shipbuilders
11.2013 - 04.2014
- Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
- Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
Education
Red Seal Steamfitter - Steamfitter
UAPICBC
North Delta, BC06-2021
Skills
- Equipment Operation
- Leading teams
- Supervisory skills
- Verbal and written communication
Timeline
Commissioning General Forman
FCCL
10.2024 - Current
Compressor Piping General Forman
FCCL
11.2023 - 10.2024
Closure Welds General Forman
FCCL
05.2023 - 11.2023
Closure Weld Forman
FCCL
09.2022 - 05.2023
Undergrounds Piping Forman
FCCL
03.2022 - 09.2022
Undergrounds Pipefitter
FCCL
03.2021 - 03.2022
Pipefitter
Brymark
10.2020 - 03.2021
Pipefitter
CIMS
08.2020 - 10.2020
Pipefitter Forman
Newco Fabrication
04.2020 - 08.2020
Pipefitter
Lorneville
01.2020 - 04.2020
Pipefitter Forman
Newco Fabrication
07.2019 - 12.2019
Pipefitter
Sinco
02.2019 - 07.2019
Pipefitter Leadman
Newco Fabrication
05.2014 - 02.2019
Pipefitter
Allied Shipbuilders
11.2013 - 04.2014
Pipefitter Helper
SK Tech
06.2010 - 11.2016
Red Seal Steamfitter - Steamfitter
UAPICBC
Similar Profiles
Matthew Lacroix-ReidMatthew Lacroix-Reid
Instrument Control Technician & Industrial Electrician at FCCLInstrument Control Technician & Industrial Electrician at FCCL
Martin SharpeMartin Sharpe
Welder/Ironworker at FCCLWelder/Ironworker at FCCL
Tyler RossTyler Ross
Equipment Coordinator at FCCLEquipment Coordinator at FCCL
Deann MarshallDeann Marshall
Director of Operations at Xyolhemeylh - F.V.A.C.F.S.S.Director of Operations at Xyolhemeylh - F.V.A.C.F.S.S.
Francia Jee GementizaFrancia Jee Gementiza
Health Career Support Worker at The Cascades- Sienna Senior LivingHealth Career Support Worker at The Cascades- Sienna Senior Living