Cristian Organes
El Cajon,CA
Summary
Focused on achieving deadlines and satisfying customers with fast deliveries and damage-free cargo. Capable of updating manual or digital logs and maintaining compliance with all applicable standards.
Developed strong time management and organizational skills in fast-paced environment. Skilled in route planning and vehicle maintenance, ensuring efficient and safe operations. Looking to transition into new field where these skills can be effectively utilized.
Dependable and safety-conscious with keen eye for detail. Knowledge of traffic laws and vehicle maintenance, coupled with skills in route planning and navigation. Committed to ensuring timely and safe transportation, enhancing operational efficiency.
Overview
9
9
years of professional experience
1
1
Certification
Work History
Motor Vehicle Operator
Naval Facilities Engineering Command (40hrs/wk)
06.2024 - Current
- Operates primarily vehicles weighing more than 32,000 pounds, such as, semi-tractor-trailers, heavy duty flatbed trucks, heavy fuel tank trucks, heavy straight in-line trucks, heavy duty tow trucks, heavy vacuum trucks, crane trucks, and heavy-duty waste disposal/trash collection trucks
- Operate tractors with trailers or semitrailer coupled by means of turntable (fifth wheel) or pintle hook, and tandem rig consisting of either a single trailer or two trailers in tow
- Operate vehicles equipped with air brake connections between the truck or truck tractor and trailer or semitrailer, driving controls include gear shift lever, brake pedal, accelerator, clutch and air brake control and levers for supplying power to the driving wheels
- Couple and uncouple the tractor and semi-trailer or truck and trailer and connect and disconnect the air brakes and electrical lines
- Operate limited maneuverability vehicles that have more than one body and two braking systems or are oversized
- Operate heavy vehicles such as, tractor-trailer or truck and full trailer combinations that requires knowledge and skill to determine the correct turning radius for the flection-type vehicles
- Operate in narrow, congested areas, and congested ports or fueling/refueling facilities
- Skilled in applying the dual braking system for combination vehicles especially on steep winding grades, without causing the trailers to jackknife
- Drive heavy load vehicles on the flight line as well as over public roads; and operating the vehicle’s auxiliary pumping system including regulating the pumping pressure and the rate of fuel flow which varies with each type of aircraft being serviced
- Apply knowledge and skills in planning the route in accomplishing long-distance driving; performing full range of load planning; and maneuvering through congested locations, difficult metropolitan traffic, high speed highways, narrow country or mountain roads, and steep winding grades
- Perform operator maintenance on all vehicles operated to include but no limited to checking fuel, oil, tires, brakes; installing and emergency fan belt or replacing an electrical fuse; and as required makes minor repairs or adjustments
- Load, arrange, and secure varies cargo when relative weights, tie-down requirements, and unloading sequence must be considered
- Operate direct/oversee or assist others with the loading and unloading of cargo and make difficult judgments concerning the arrangement and securing of the cargo
- This responsibility is great because the size and type of the vehicles increases the tendency of the trailer to sway and the driver to lose control of the vehicle
- Perform assignments with virtually no supervision, and is responsible for the safe transport of cargo on extended trips
- Perform duties in support of hazardous material handling, such as functions supporting safe storage and movement of hazardous or toxic materials such as hazardous wastes or certain types of ammunition, explosives, chemicals, or radioactive materials in accordance with facility and regulatory requirements
- Apply skills in operating forklifts and or other motor vehicles to load, transport, and store hazardous materials
- Obtained a hazmat endorsement
- Skilled in maneuvering oversized vehicles, evaluating conditions and load limits of bridges, in scheduling weigh point, and in assessing traffic conditions and hazards locally and over long-distance routes
- Skilled in backing tractor-trailers and oversized vehicles into loading docks, between other trailers, and in narrow, congested areas, parked aircraft and in constricted areas
- Ability to perform minor repairs or adjustments on vehicles
- Knowledge and skill in applying safety rules and regulations
Truck Driver Class A
John Smith Earthworks Inc (40hrs/wk)
01.2023 - 06.2024
- My duties are to inspect truck before heading on the road every morning
- I drive a roll-off truck and every day my task if different
- I make container deliveries to various customers
- Once container is ready for pickup, I visually inspect what's inside the container once I verify what's inside I make a trip to the correct landfill
- I also export dirt, concrete and more to the landfill
- I make deliveries of different materials to various customers
- Collected delivery instructions to verify freight and routes for on-time delivery and adjusted routes based on changing conditions.
- Improved on-time delivery by optimizing truck routes and schedules.
Truck Driver Class A
United States Postal Service, USPS (40hrs/wk)
10.2019 - 12.2022
- Load up my trailer with mail and parcels and deliver to different stations
- Truck driven was based on the station I was going to deliver too
- From 53' trailer to driving a 7- or 11-ton box truck
- Collected delivery instructions to verify freight and routes for on-time delivery and adjusted routes based on changing conditions.
- Improved on-time delivery by optimizing truck routes and schedules.
- Developed strong relationships with clients through effective communication skills and consistent reliability in delivering their goods safely and promptly.
- Drove tractor and trailer to weigh stations before and after loading and along routes to document weights and comply with state regulations.
Class A Driver
EP Transportation (40hrs/wk)
08.2018 - 10.2019
- My duties with EP Transportation were to do a pre-trip and post trip of the truck before and after my shift
- I drove a 10-speed freightliner hauling a 53' walking floor trailer from Otay to Fontana exporting dirt, and other materials
- I would also drive a roll-off truck and dump truck to deliver materials and containers to various customers
- Complied with all truck driving rules as well as company policies and procedures regarding safe vehicle operations
- Performed regular inspections and reported issues to company mechanics
- Inspected load security and checked for any damages
- Utilized maps and GPS systems to plan efficient routes
- Picked products for specific routes according to pick sheets
- Displayed keen attention to detail when securing loads using straps, chains or other restraints to prevent shifting during transit.
- Managed accurate logbooks detailing hours of service, mileage, and fuel consumption for regulatory compliance.
Flatbed Driver
G&F Roof Supply Inc (40hrs/wk)
01.2016 - 08.2018
- My duties with G&F Roof Supply are too do a pre-trip and post trip of the truck before and after my shift starts and ends
- I was responsible to pick up roofing materials from Riverside and Los Angeles areas with a 48' flatbed tractor trailer 10 speed freightliner and make sure trailer was not over weight
- Make sure load was strap down and secure
- Bring materials back to San Diego warehouse and unload with a forklift
- Picked up and delivered materials from approved vendors, ensuring that equipment was properly secured during transport
- Complied with all truck driving rules as well as company policies and procedures regarding safe vehicle operations
- Documented mileage, deliveries, pickups, customer issues and damages
- Inspected load security and checked for any damages
- Utilized maps and GPS systems to plan efficient routes
- Picked products for specific routes according to pick sheets
- Estimated weights, heights and centers of balance to make precise placements
- Moffet and Piggyback experience
- Improved delivery efficiency by planning optimal routes and adhering to strict schedules.
- Adapted quickly to changing circumstances or unexpected obstacles while maintaining a customer-focused approach at all times.
Education
Commercial Driver's License (CDL) - Class A
Sanchez Trucking School
San Diego, CA07.2026
High School Diploma -
Crawford High School
San Diego, CA01.2008
Skills
- Air brake endorsement
- Multitasking capacity
- Safe driving practices
- Commercial driver's license
- Manual transmission operation
- Defensive driving techniques
- GPS navigation proficiency
- Weather condition adaptation
- Logbook record-keeping
- Vehicle maintenance
Certification
- CDL
- CDL A
- Driver's License
- Air Brake Endorsement
- CDL B
- CDL, A, CA, 07/01/26
Languages
Spanish
English
Timeline
Motor Vehicle Operator
Naval Facilities Engineering Command (40hrs/wk)
06.2024 - Current
Truck Driver Class A
John Smith Earthworks Inc (40hrs/wk)
01.2023 - 06.2024
Truck Driver Class A
United States Postal Service, USPS (40hrs/wk)
10.2019 - 12.2022
Class A Driver
EP Transportation (40hrs/wk)
08.2018 - 10.2019
Flatbed Driver
G&F Roof Supply Inc (40hrs/wk)
01.2016 - 08.2018
High School Diploma -
Crawford High School
- CDL
- CDL A
- Driver's License
- Air Brake Endorsement
- CDL B
- CDL, A, CA, 07/01/26
Commercial Driver's License (CDL) - Class A
Sanchez Trucking School
Similar Profiles
Darrin SpencerDarrin Spencer
Utilities System Operator at Naval Facilities Engineering CommandUtilities System Operator at Naval Facilities Engineering Command
Iliana QuintanillaIliana Quintanilla
Business Support Specialist at Department of the Navy: Naval Facilities Engineering Systems Command (NAVFAC) Washington/BethesdaBusiness Support Specialist at Department of the Navy: Naval Facilities Engineering Systems Command (NAVFAC) Washington/Bethesda
Sheila SakaiSheila Sakai
Program Analyst at Naval Facilities Engineering Command, PacificProgram Analyst at Naval Facilities Engineering Command, Pacific