Charles Nnorom Okechukwu

• Setup of injection mould, equipment, machinery, automation, tooling and other items according to established standards.

• Diagnosing and remedying it typical machinery, materials, equipment and tooling issues.

• Safe and proper handling and storage of moulds, tools and equipment.

• Process and equipment adjustments to ensure product and processes are within established specifications.

• Startup/Shutdown of machinery and equipment.

• Calibrated automated systems to function at peak capacity according to manufacturer's guidelines.

• Removed broken or jammed pieces from machinery.
• Replaced worn or damaged parts on equipments.

• Communicate information among all project members
• Daily interaction with the clients to interpret their needs and requirement and representing them in the field
• Provide technical support for appropriate team members
• Preparing, scheduling, coordinating and monitoring the assigned engineering projects
• Provide any additional support required for successful completion of the project
• Assist in management of project permit process
• Recognize, report and solve problems in a creative, positive and constructive way and make recommendations for improvement in systems, procurement and policies
• Create scope of work and assemble front-end project manual

• Attend Tender Clarification Meetings
• Reviewed welding procedures
• Reviewed NDT procedures
• Checked project equipment/materials
• Checked calibration certificates of equipment
• Checked certification of NDT personnel
• Supervised welder qualification test
• Carried out pre/post visual inspection on welded plate’s, beams for pipe racks and pipes
• Supervised the installation of Cathodic Protection (CP) on the piping, condensate tanks, fire water systems, etc
• Reviewed radiographs
• Prepared daily and monthly progress reports
• Compiled and submit monthly reports

• Inspection of LPG propane gas pipeline
• Interpretation/Evaluation of radiographs
• Reviewed and approved welding procedures
• Reviewed and approved NDT procedures
• Checked project equipment/materials
• Checked calibration certificates of equipment
• Checked certification of NDT personnel
• Participated in the planning of work site
• Carried out visual inspection on welds, coated and non-coated pipes, and also on flanges, elbows, valves
• Proof read and signed NDT and welding reports
• Marked out weld defects
• Supervised Magnetic Particle Inspection (MPI), Dye-Penetrant Inspection (DPI) and Ultrasonic Thickness Measurement (UTM) Tests
• Prepared NDE daily request for radiography
• Identified and marked out welded joints for radiography testing
• Attended safety and progress meetings
• Monitored work in progress
• Inspected work at 100% completion
• Supervised Radiographers on 'Industrial Radiographic Safety'
• Inspect welders and making sure all welding procedures are implemented
• Monitored hydrostatic test on both the lines and different types of valves on the entire gas plant fabrication, and signs off the charts
• Witnessed hydrogen purging on the gas line
• Prepared and submitted final report

• Attend the kickoff meeting
• Reviewed welding procedures
• Reviewed NDT procedures
• Checked project equipment/materials
• Checked calibration certificates of equipment
• Checked certification of NDT personnel
• Participated in the planning of work site safety
• Supervised welder qualification test
• Reviewed radiographs
• Carried out visual inspection on welds, coated and non-coated pipes, and also on flanges, elbows and valves before use
• Carried out Holiday Detector Test on the coated pipes and the rapped welded joints
• Marked out weld defects and mechanical damages on coated pipes
• Supervised the flushing, pigging and hydrostatic test on the four flow lines and different types of valves on well head manifold and the flow station manifold, and signs off the charts
• Monitored the booming and cleaning of the oil spills at the leak points in the swamp
• Supervised the stringing, sectional replacement or all the leak points and clamped area’s and also the entire Tie in’s and hook up’s well head manifold
• Prepared daily and monthly progress reports
• Compiled and submit monthly reports

• Reviewed NDT procedures
• Reviewed welding procedures
• Checked project equipment/materials
• Checked calibration certificates of equipment
• Checked certification of NDT personnel
• Participated in the planning of work site safety
• Supervised welder qualification test
• Reviewed radiographs
• Witnessed mechanical test (Bend and Tensile Tests)
• Carried out visual inspection on welds, coated and non-coated pipes, and also on flanges and elbows before use
• Carried out Holiday Detector Test on the coated pipes and the rapped welded joints
• Marked out weld defects
• Prepared repair list of welds with defects
• Witnessed penetrant, magnetic particle and vacuum pump tests
• Proof read and signed NDT and welding reports
• Monitored hydrostatic test on both the flow lines and different types of valves on well head manifold and the flow station manifold, and signs off the charts
• Monitored the entire Tie in’s, Road crossings, and thrust boring on the line
• Prepared daily and monthly progress reports
• Compiled and submit monthly reports

• Reviewed welding procedures
• Reviewed NDT procedures
• Checked project equipment/materials
• Checked calibration certificates of equipment
• Checked certification of NDT personnel
• Participated in the planning of work site safety
• Supervised welder qualification test
• Reviewed radiographs
• Witnessed mechanical test
• Carried out visual inspection on welds, coated and non-coated pipes, and also on flanges and elbows before use
• Carried out Holiday Detector Test on the coated pipes and the rapped welded joints
• Marked out weld defects
• Prepared repair list of welds with defects
• Witnessed penetrant, magnetic particle and vacuum pump tests
• Proof read and signed NDT and welding reports
• Monitored hydrostatic test on both the flow lines and different types of valves on well head manifold and the flow station manifold, and signs off the charts
• Monitored the entire Tie in’s, Road crossings, and thrust boring on the line
• Prepared daily and monthly progress reports
• Compiled and submit monthly reports

• Reviewed and approved welding procedures
• Reviewed and approved NDT procedures
• Checked project equipment/materials
• Checked calibration certificates of equipment
• Checked certification of NDT personnel
• Participated in the planning of work site safety
• Reviewed radiographs
• Carried out visual inspection on welds, coated and non-coated pipes, and also on flanges and elbows before use
• Marked out weld defects
• Prepared repair list of welds with defects
• Proof read and signed NDT and welding reports
• Monitored hydrostatic test on both the flow lines and different types of valves on well head manifold and the flow station manifold, and signs off the charts
• Monitored the entire Tie in’s, Road crossings, and thrust boring on the line
• Prepared daily, weekly and monthly progress reports
• Compiled and submit monthly reports

• Supervised the installation of Cathodic Protection on the plant
• Cataloguing of radiographs
• Interpretation/Evaluation of radiographs
• Reviewed and approved welding procedures
• Reviewed and approved NDT procedures
• Checked project equipment/materials
• Checked calibration certificates of equipment
• Checked certification of NDT personnel
• Participated in the planning of work site
• Carried out visual inspection on welds, coated and non-coated pipes, and also on flanges, elbows, valves
• Prepared repair list of welds with defects
• Proof read and signed NDT and welding reports
• Marked out weld defects
• Supervised Magnetic Particle Inspection (MPI), Dye-Penetrant Inspection (DPI) and Ultrasonic Thickness Measurement (UTM) Tests
• Prepared NDE daily request for radiography
• Identified and marked out welded joints for radiography testing
• Attended safety and progress meetings
• Monitored work in progress
• Inspected work at 100% completion
• Supervised Radiographers on 'Industrial Radiographic Safety'
• Inspect welders and making sure all welding procedures are implemented
• Monitored hydrostatic test on both the lines and different types of valves on the entire gas plant fabrication, and signs off the charts
• Witnessed hydrogen purging on the gas line
• Interpretation/Evaluation and reporting of radiographs for the 2 X 20,000 barrel crude oil storage tanks constructed by OBAX WORLDWIDE LTD in the Oredo flow station
• Prepared and submitted final report