Summary
Overview
Work History
Education
Skills
Certification
Timeline
Generic

Anthony Paniagua

Fontana

Summary

Highly organized and detail-oriented professional with a proven track record of delivering exceptional results. Adaptable and quick to respond to new and demanding circumstances, consistently demonstrating the ability to thrive under pressure. United States Army Veteran seeking an opportunity with a reputable organization to apply and enhance versatile skill set.

Overview

5
5
years of professional experience
1
1
Certification

Work History

Mechatronics & Robotics Technician

Amazon
12.2023 - Current
  • Enhanced operational efficiency through belt installation and tracking.
  • Performed installation and restoration of all roller components.
  • - Worked on all MDR beds replacing both types of MDR rollers, conveyer beds, and belt tracking
  • - SEW motor/gearbox rebuild, install, shaft collar and coupling assembly install, terminal block wiring
  • Performed comprehensive maintenance on flex conveyers including O rings replacement, electrical assessments, and equipment rebuilds to uphold efficient operations.
  • - Destuffit maintenance, MDR swap, control buttons swap, intralox belt repair, sprockets swap/installation, trouble shooting Remote, Control, Drive Panel, Cable reel replacement
  • - Induction Stations maintenance, belt tracking/install, end rollers repair/install, take up assembly install, plywood install, bearing covers install, drive belt install sprocket install tension drive belt, photo eyes
  • - Powered flex conveyers maintenance, belt install/tracking, rollers install
  • - Alignment Conveyers maintenance, belt install/tracking, rollers install
  • - Scale beds maintenance, belt install/tracking, rollers install
  • - SICK Scan Tunnel
  • - CTM Photo eyes
  • - Verification/Divert Scanner
  • - Steerable Wheel diverts
  • - Label Apply Systems
  • - SC3 CROSS BELT SORTER
  • Maintained a safe work environment by strictly adhering to established safety protocols and guidelines.
  • Trained new technicians on standard operating procedures, ensuring consistency across the team.
  • Demonstrated adaptability when faced with new challenges or technologies, enabling quick mastery of necessary skills.

Maintenance Technician II

Fed Ex Ground
02.2023 - 12.2023
  • - Know components of Scan Tunnel, SOPAS system for hands in maintenance/trouble shooting
  • - Replace mirrors, ICR890's, Dimensioners, Brackets in framing, framing install/rebuild
  • - Proficient in tray service and track cleaning
  • - Rebuild/Repair in sorter tray and tray covers-Access BG Fusion for ITEM Carrier Matrix to detect single carrier status after service, enable/disable single carrier
  • - Install/Repair Opti Drive wheels, mechanically/electrical disable
  • - Use BG Fusion to locate assets, Induc Stations, Scan Tunels, Opti Drives, clear E stops, specific flagging/faults photo eyes, troubleshoot
  • - Track and tension scale belts, motor swap, reset scales through GDU, Trouble shoot
  • - Demonstrate how to operate system for Scan Tunel ID packages received, no reads %'s, multi reads, bad transmits
  • - Send sorter a recognized qr code box to ensure all Scan Tunels dimensioners, lectors, ICR and recognizing box dimension and weight
  • - Use system to detect bad images in Camera Tunel and no reads
  • - Experienced in repair/rebuild conveyer rollers and belts
  • - 3 Stage Extendo maintenance, install cams, install/track belt, repair/install abe chain, grease/install bearings
  • - Slider bed conveyers and power curve belt install, all rollers install/rebuild, maintenance
  • - Belt Cut and Relace expert
  • - Use GDU to reset faults, start/jog assets, place conveyers/assets in maintenance mode, jog motors to certain %'s, enable/disable photo eyes, PLC back up
  • - Hippo Chutes repair/maintenance
  • - Spiral chutes repair/maintenance-RTL/Gravity beds repair/rebuild/maintenance
  • - Photo eyes/Prox install/alignment
  • - Oil change in SEW motors, rebuild/install
  • - Encoder wheels install/replacement, verify scales through CPI Camera

Mechanical Installer

DCI
10.2021 - 02.2023
  • - Weld on conveyer install and maintenance across multiple states
  • - Worked on many FedEx cut-ins and shutdowns which included the adjusting of new conveyer lines, unloaders, adding new conveyer systems to solve recurring problems during sorts
  • - Install and maintenance for unloaders (leveling unloaders as well)
  • - Install chutes and spiral chutes
  • - Install different conveyer beds to make conveyer system from BS1, BS2, BS3, and BS9 beds, nose-overs, motors, and tails
  • - Fabrication to spec and custom build for handrails, platforms, and frames for drives
  • Analyzed blueprints for construction accuracy and electrical troubleshooting
  • Executed assembly of key components including belts, rollers, and motors.
  • - Maintenance

Mechanical Installer

IMI
04.2021 - 10.2021
  • Verified proper installation and compliance of all equipment according to customer standards.
  • - Installed header-steel for conveyers, gravity beds, installed columns and beams for mezzanine
  • - Installed grading, custom platforms and handrails
  • - Layout reference lines for entire warehouse
  • - Stayed after complete installation to stand by running new conveyer equipment
  • Completed motor, roller, and belt installations with precision.
  • Ensured consistent performance by maintaining all belt systems.

Mechanical Installer

DCI
01.2020 - 04.2021
  • Operated equipment including forklifts, scissor lifts, and boom lifts.
  • Developed expertise in full-cycle conveyor system installation.
  • - Installed conveyer beds, side pans, belts, roller, motors
  • - Installed Chutes and platforms
  • - Installed platforms and structures needed for conveyer lines and workspaces
  • Conducted thorough inspections post-installation to confirm fulfillment of all adjustments and client specifications.
  • Configured and positioned SEW motors for optimized functionality.
  • Learned operational aspects of PLCs, VFD units, and photoelectric sensors.
  • Executed post-installation equipment maintenance to guarantee full operational availability.

Education

High School Diploma -

Fontana High School

Skills

  • Install weld up and bolt up conveyers
  • 5 years SMAW welding
  • 5 years Maintenance
  • 5 years VFD and PLC troubleshooting
  • 5 years in Blue Print Reading & Schematics
  • 5 years in Leadership
  • Proficient in Microsoft Office

Certification

  • OSHA 10
  • One man lift
  • Scissor Lift
  • Boom Lift
  • Forklift
  • LOTO

Timeline

Mechatronics & Robotics Technician

Amazon
12.2023 - Current

Maintenance Technician II

Fed Ex Ground
02.2023 - 12.2023

Mechanical Installer

DCI
10.2021 - 02.2023

Mechanical Installer

IMI
04.2021 - 10.2021

Mechanical Installer

DCI
01.2020 - 04.2021

High School Diploma -

Fontana High School

Similar Profiles

CREATE PROFILE
Anthony Paniagua