Anthony Mckell Ibarra
Palmdale
Overview
8
8
years of professional experience
Work History
Northrop Grumman
06.2022 - Current
- At Northrop Grumman I have been proficient in reading and understanding blueprints, technical specifications, and operating procedures.
- I have also mastered different types of drilling, countersinking, and fabricating on different materials.
- I also excel in using micrometers, calipers, sanders, scales, Trulock gauges, halo tools, pulling holes, filling holes, bushing holes, and using several hand/power tools.
- I am also knowledgeable in composite work like wet layups and bagging processes.
- While on F-35 I was a safety advisor and an acting lead which helped progress on instructing the team, working difficult tags/repairs, and statements of work.
- Lastly, I have grasped the ins and outs of MES.
New Hampshire Ball Bearings
01.2020 - 12.2020
- At New Hampshire ball bearings I would do machine work.
- We would run parts and the machine would cut them to exact specs and I would have to measure and make sure they were the exact size.
- I would use calipers, micrometers, and microscopes to make sure all parts were exactly how the blueprint was asking for.
AAE Aerospace
04.2019 - 11.2019
- At AAE Aerospace I worked on the mold pressing machine.
- I would use blueprints and different tools such as filers, different waxes, screwdrivers and wrenches.
- I was using different types of carbon fiber materials.
Marathon Truck and Body
12.2018 - 04.2019
- At Marathon I would assemble and fabricate box trucks.
- I would do lots of drilling, riveting, sealing and fabricating on the trucks.
- I would measure and cut material to proper specs that I would get off the blueprints.
Build Your Dreams Coach and Bus
04.2018 - 11.2018
- At BYD I started off working on batteries I would install them onto the buses and route all high voltage cables and make sure everything was connected properly.
- Then I switched departments and I worked in HVAC and installed all A/C systems and roof hatches as well as all the antennas that go on the bus.
- I would braze copper materials and I would solder the wiring that I had to connect for the A/C units.
Encore Composite Structures
01.2018 - 03.2018
- At Encore Composite structures I work with carbon fiber and do a lot of layups, bagging process and I worked with aircraft parts.
- I used heat guns, drills, squeegees, different kinds of tapes, bleeder breather material, and FNP.
Education
Aircraft Fabrication and Assembly -
Antelope Valley College
10-2021
Timeline
Northrop Grumman
06.2022 - Current
New Hampshire Ball Bearings
01.2020 - 12.2020
AAE Aerospace
04.2019 - 11.2019
Marathon Truck and Body
12.2018 - 04.2019
Build Your Dreams Coach and Bus
04.2018 - 11.2018
Encore Composite Structures
01.2018 - 03.2018
Aircraft Fabrication and Assembly -
Antelope Valley College