Highly-motivated employee with desire to take on new challenges. Strong worth ethic, adaptability and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.
Overview
17
17
years of professional experience
Work History
Bird Control Radar System Operator
Acden Aves
03.2023 - 06.2024
Ensured high availability of critical systems by conducting routine audits and performance assessments.
Facilitated seamless transitions during major infrastructure upgrades, mitigating risks associated with downtime or data loss.
Performed mudline measurements on tailings pond adhering to safe boating practices.
Refuel and check fluid levels on diesel generators while recording engine speeds, hours and temperatures.
troubleshooting software and hardware issues between the radars and PDUs (Primary Deterrent Units).
Maintaining and repairing propane cannons.
Performing thourough pre and post trip inspections on company trucks.
Wireline operator
VOLTAGE WIRELINE
09.2022 - 02.2023
At Voltage I assist in putting together and tearing down down hole tools such as ten and twenty tools, guns , junk baskets and bailers
During shop days I perform maintenance on our trucks and equipment and keep the shop clean and tidy.
Minimized environmental impact by adhering to proper waste disposal procedures in compliance with regulatory requirements.
Developed strong working relationships with clients, fostering an atmosphere of trust that led to repeat business opportunities.
Torch cutter
SECURE ENERGY
11.2021 - 08.2022
At Secure my main job is to cut up tanks, vessels and other large metal objects with a propane torch to prepare for shipment on rail cars
I also assist in moving rail cars to get them ready for either loading or shipping out and I am responsible for refueling all of the yard equipment at the start of every shift.
Keeping the yard neat and tidy and assisting in snow removal.
Laborer
D AND M PLASTICS
04.2019 - 03.2020
At D and M my main responsibility was to efficiently operate the rotational molding oven, making sure to add the correct amounts of plastics and to make sure the oven was programmed correctly
I had to keep up a regular maintenance schedule of lubrication and visual inspections of the oven and forklift.
Pest Control Technician
SCAT PEST CONTROL
04.2014 - 06.2018
I was responsible for the safe application of insecticides in order to gain control of insect infestations
I was also responsible for checking various traps and maintaining bait stations for numerous species of rodents
During migratory bird season I was responsible for deploying screamers and bangers (fireworks) to deter birds from nesting in the Lloydminster Upgrader
I also learned how to be very discreet with clientele and how to calm people down and educate them on the situation I was there to help them with.
Maintenance Worker
THE TROPICAL INN
06.2013 - 04.2014
I was an evening worker at the Tropical Inn and my main duties were maintenance oriented
I was responsible for keeping the pool Ph at the correct level and other maintenance such as plumbing and snow removal.
Installer
TIDY TRUCK BOXLINERS
07.2012 - 04.2014
With Tidy Truck I installed numerous automotive accessories such as bumpers, hitches and airbag kits
We kept a very clean shop and often worked as a team to troubleshoot problems.
Floorhand
MATRIX WELL SERVICING
03.2012 - 07.2012
I was responsible for operating hydraulic tongs to separate and connect pipe and rod
I also made sure the rig was clean of oil and free of debris.
Power Engineering Student, Probe Stand Operator
ADM
01.2011 - 12.2011
As a student I was responsible for operating a 5.2 megawatt co-gen unit and D-type boiler
I also monitored and adjusted the pH and conductivity levels in the water plant
In the probe stand I would test canola seed for oil, moisture content and visually inspect seed for damage.
Pump Attendant, Cashier
CO-OP GAS BAR
03.2011 - 09.2011
I was responsible for safely dispensing fuel, diesel and propane for clients
I would also operate the till and keep a professional with our customers and accurately count and handle large amounts of tender.
Grounds Maintenance Worker
LAKELAND COLLEGE
11.2009 - 09.2011
I did all manner of groundskeeping from watering plants, mowing grass with a tri-deck mower to litter removal
I did maintenance in the dorms such as dry wall patching and fixing doors
In the winter months I was responsible for snow removal by means of skidsteer, Kubota HST or shovel.
Warehouse Shipper
BUCKWOLD WESTERN
01.2007 - 03.2009
Here I would co-ordinate shipments of flooring materials throughout western Canada and the United States while keeping track of records and clientele files
I also ran numerous forklifts and operated a carpet/linoleum cutting and rolling machine.
Education
Some College (No Degree) - Heavy Oil Operations Technician.
Lakeland College
Lloydminster, AB
Skills
Experience on forklifts, skidsteer, tractor and zoomboom
Mechanically Inclined
Strong work ethic
Valid class 5 Alberta license with air brake endorsement
H2S Alive
Standard first aid w/CPR C & AED and BC emergency first aid
CSO
Approval letter for access to high hazard explosives (Type E, I or D)
Timeline
Bird Control Radar System Operator
Acden Aves
03.2023 - 06.2024
Wireline operator
VOLTAGE WIRELINE
09.2022 - 02.2023
Torch cutter
SECURE ENERGY
11.2021 - 08.2022
Laborer
D AND M PLASTICS
04.2019 - 03.2020
Pest Control Technician
SCAT PEST CONTROL
04.2014 - 06.2018
Maintenance Worker
THE TROPICAL INN
06.2013 - 04.2014
Installer
TIDY TRUCK BOXLINERS
07.2012 - 04.2014
Floorhand
MATRIX WELL SERVICING
03.2012 - 07.2012
Pump Attendant, Cashier
CO-OP GAS BAR
03.2011 - 09.2011
Power Engineering Student, Probe Stand Operator
ADM
01.2011 - 12.2011
Grounds Maintenance Worker
LAKELAND COLLEGE
11.2009 - 09.2011
Warehouse Shipper
BUCKWOLD WESTERN
01.2007 - 03.2009
Some College (No Degree) - Heavy Oil Operations Technician.
Lakeland College
Similar Profiles
Erica Ross, EPErica Ross, EP
Regional – Environmental and Regulatory Manager at Acden AvesRegional – Environmental and Regulatory Manager at Acden Aves