Abdelbassit Adam
Montreal,Canada
Summary
Hardworking and passionate job seeker with strong organizational skills eager to secure entry-level [Well Services] position. Ready to help team achieve company goals.
Knowledgeable accurately collects, analyzes and models physical samples and digital data to meet quality assurance standards. Talented in inspecting operations, approaching problems critically and using sound judgment to break down and correct deficiencies. Solid expertise gained during [18]-year career.
Overview
19
19
years of professional experience
Work History
OPERATION ENGINEER
PCM a Glencore E&P CANADA INC
01.2019 - 01.2022
- Providing support to all work over & rig less supervisors in the field including Wel Test , Wire Line, Slick Line
- Supporting the field in the safe and efficient execution of well maintenance/repair activities in order to maximize production volumes
- Writing up well Intervention programs
- Operation steps, instructions
- Personally, supervised the operation in the well sites
- Analyzed collected data from field tests and prepared reports with results
- Monitored all field test activities to ensure compliance with safety regulations.
DRILLING & COMPLETION ENGINEER
Moundou Chad RIG DRILLING
03.2015 - 03.2019
- As Rig Drilling and Completion Engineer my main duty is to ensure the right execution of the drilling program, I react as, owner of the drilling program, and make sure there will not be any deviation of all third parties from the approved management of change document signed by the management
- Provide technical Assistance and Support to the DSV (Company Man) on all Daily Drilling Operation, Monitored inventory levels of materials needed for drilling operations, ordering additional supplies as necessary, coordinating with the service companies & warehouse, logistics, Maintained open communication with site personnel to ensure safety protocols were followed
- Under supervision of company man, design and execute cementing jobs, RIH, liner Tally, tracking rotating hours, updated daily drilling reports for review by the supervisor
- Provided technical assistance related to drilling operations, coordinated with subcontractors to complete projects on time and within budget, forecast (Look Ahead), Drilling Performance, kill sheet, Cost Sheet, tracking non-productive time (NPT), preparation & execution of FIT /LOT tests, writing End of Well Report (EOWR)
- Ensured compliance with environmental regulations throughout all phases of drilling operations, conducted regular inspections of equipment and machinery used during the drilling process
- Collaborated with supervisors from other departments to coordinate work schedules and optimize efficiency of operations.
Night Work Over Supervisor
CARACAL ENERGY A GLENCORE E&P CANADA INC
03.2013 - 03.2015
- Manage time, teams, equipment and other resources to optimize performance and efficiency
- I ensure that the company's HSE policies are strictly followed
- Closely monitor drilling parameters and accurately put data into the daily DDR drilling report via our WellEz Cloud-Based Drilling Lifecycle Reporting drilling software
- Analyzed collected data from field tests and prepared reports with results
- Monitored all field test activities to ensure compliance with safety regulations
- Ensured safety of personnel and equipment by adhering to all company policies and procedures
- Supervised the night shift drilling operations, including overseeing maintenance, repairs and troubleshooting issues
- Inspected drill sites for conformance with safety regulations prior to commencing work
- Monitored daily progress reports of drilling activities and adjusted accordingly as needed
- Coordinated with other departments such as engineering, geology, logistics to ensure effective communication between field staff and management
- Provided technical guidance in order to optimize drilling operations while minimizing risks associated with the job
- Maintained accurate records of all drilling activities in accordance with company standards
- Developed cost-effective strategies for well development projects that achieved desired results within budget constraints
- Assisted in developing safe working practices for personnel operating at night in a hazardous environment
- Resolved conflicts between workers quickly and effectively while maintaining a positive working atmosphere
- Organized crew meetings to discuss upcoming plans and activities related to night drilling operations
- Conducted regular inspections of rigs, tools, equipment and supplies in order to maintain operational efficiency
- Enforced compliance with health and safety regulations at all times during operations
- Prepared detailed reports summarizing daily operations for review by upper management
- Prepared and planned worksites to help jobs run smoothly
- Reported project progress, site problems and labor status to supervisors.
Petroleum Engineer
MINISTRY OF PETROLEUM & ENERGY
01.2010 - 01.2013
- I was recruited at MOPE as a petroleum engineer, and I held different positions as an Oil Inspector in the field to monitor the different companies working in Chad and control them to comply with the Chadian oil code respect the national environmental standard, and treat local employees well
- As a Production Engineer later I was promoted to be the Head of Production and Transport at the ministry I oversaw the monitoring of all oil produced in Chad in terms of quantity and exportation
- Performed pressure transient analysis on production wells to identify inflow profiles from various zones within a single reservoir
- Monitored surface equipment performance including separators, compressors, pumps, valves, meters, and other components related to production facilities
- Assessed field development plans with respect to economic feasibility, environmental impact, and safety regulations
- Identified opportunities for improved efficiency in existing production processes while ensuring compliance with industry standards
- Collaborated with geologists, geophysicists, and other professionals in order to integrate all available data into a unified interpretation of reservoir characteristics
- Prepared detailed reports outlining findings from investigations into problems encountered during drilling operations or production activities
- Provided training sessions for personnel on topics related to the proper operation of surface equipment or best practices when working with hazardous substances
- Advised management on potential investments that would increase profitability while minimizing risk factors
- Gathered information needed by senior decision-makers to direct operations
- Tracked compliance, performance, and safety concerns at drill sites
- Established operational plans for oil extraction
- Oversaw well evaluations and testing procedures.
Well Testing Operator
CNLS
01.2006 - 10.2009
- oversees all well testing equipment during the rig up to ensure they are working properly
- Directed and monitored completion and evaluation of wells, well testing or well surveys.
- Contributed to safety initiative and promoted positive safety culture.
- Completed daily reports inputting data into production software.
- Developed corrective action plans for nonconformances to maintain safety of facility.
- Tracked daily consumables and operational anomalies to report to supervisor.
- Operated oil and gas well equipment for proper positioning for each stage of operation.
- Chaired pre-job, toolbox meetings prior to well test operations on-site to communicate job tasks, conduct safety briefing and address questions.
- Monitored operating parameters of installed equipment in accordance to specification.
- Tested and analyzed samples to determine content and characteristics using laboratory apparatus or testing equipment.
- Prepared samples of soil and groundwater slides and compiled relevant documentation to be shipped to contracted laboratories.
- Recorded readings from site equipment and compiled data to determine optimal prospecting locations.
- Inspected, evaluated, and interpreted data from core samples and cuttings.
- Produced detailed reports and professional presentations for use by management and regulatory agencies.
- Tested gathered samples from potential drilling sites and identified key characteristics relevant to program.
WELL TEST FIELD ENGINEER
Schlumberger
01.2003 - 01.2004
- Within SLB organization In Equatorial Guinea and Under The WCP Segma I have developed my professional skills and Training in very gugorus and chalanged environement, I have successfully completed my school and training program and performed all basic maintenance on all Surface well test equipment, from separator, heater, chock manifold, burner, gauge, and surge tanks, in addition to dressing and preparing the TDA and Down to RIH.
Education
No Degree - IWCF) Well Control Certificate
GESCO
Cairo Egypt 09.2022
No Degree - Oil Well Design And Engineering Certificate
GESCO
Cairo Egypt 01.2021
No Degree - IADC, Cairo Well Cap GTSC Cairo
GTSC
Cairo Egypt01.2014
No Degree - DRILLING PRACTICES Certificate
Petro Skills
Dubai , UAE01.2013
No Degree - Surface Well Test Certificate France (FTC
France Training Centre, Sclumberger
(FTC) France , PAU 02.2003
No Degree - Well Completion & Productivity Certificate
France Training Centre, Sclumberger
(FTC) France , PAU 01.2003
Bachelor of Engineering - Petroleum Engineering
Sudan University of Science And Technology
Khartoum, Sudan 08.2002
High School Diploma -
King Faisal High Secondary School
Ndjamena Chad 1994
Skills
- Reading Comprehension
- Piping Replacement
- Setup and Installation
- Customer Satisfaction
- Certified Technical Professional
- Bilingual (French, and English)
- Good handling of Office programs (Word, Excel, and PowerPoint)
- Drilling Software WellEz Cloud-Based Drilling Lifecycle Reporting
- Rig Less Supervision
Languages
English
Full Professional
French
Full Professional
Arabic
Professional Working
Timeline
OPERATION ENGINEER
PCM a Glencore E&P CANADA INC
01.2019 - 01.2022
DRILLING & COMPLETION ENGINEER
Moundou Chad RIG DRILLING
03.2015 - 03.2019
Night Work Over Supervisor
CARACAL ENERGY A GLENCORE E&P CANADA INC
03.2013 - 03.2015
Petroleum Engineer
MINISTRY OF PETROLEUM & ENERGY
01.2010 - 01.2013
Well Testing Operator
CNLS
01.2006 - 10.2009
WELL TEST FIELD ENGINEER
Schlumberger
01.2003 - 01.2004
No Degree - IWCF) Well Control Certificate
GESCO
No Degree - Oil Well Design And Engineering Certificate
GESCO
No Degree - IADC, Cairo Well Cap GTSC Cairo
GTSC
No Degree - DRILLING PRACTICES Certificate
Petro Skills
No Degree - Surface Well Test Certificate France (FTC
France Training Centre, Sclumberger
No Degree - Well Completion & Productivity Certificate
France Training Centre, Sclumberger
Bachelor of Engineering - Petroleum Engineering
Sudan University of Science And Technology
High School Diploma -
King Faisal High Secondary School
Similar Profiles
MARIE-CLAUDE BELLEMAREMARIE-CLAUDE BELLEMARE
Gestionnaire, Relations Avec Les Fournisseurs at Glencore CanadaGestionnaire, Relations Avec Les Fournisseurs at Glencore Canada
Jade GavillerJade Gaviller
Manager, Business Services at Glencore CanadaManager, Business Services at Glencore Canada
Lynn BuddLynn Budd
Registered Practical Nurse at Glencore Canada CorporationRegistered Practical Nurse at Glencore Canada Corporation
Lidiya VarugheseLidiya Varughese
Registered Practical Nurse at Ciusss West Island- St Marys HospitalRegistered Practical Nurse at Ciusss West Island- St Marys Hospital
MELINA ZAMPINOMELINA ZAMPINO
Senior Affiliate Marketing Manager at Income Access, A Paysafe CompanySenior Affiliate Marketing Manager at Income Access, A Paysafe Company